GaAs IC SPDT Low Loss Switch Reflective DC–6 GHz AS006L2-01, AS006L2-10 Features -01 ■ Low DC Power Consumption ■ Low Insertion Loss, Reflective, Short 0.220 (5.59 mm) 0.210 (5.33 mm) 0.130 (3.30 mm) TYP. 0.063 (1.60 mm) TYP. ■ 7 Lead Hermetic Package 0.130 (3.30 mm) TYP. ■ Capable of Meeting MIL-STD Requirements6 0.268 (6.81 mm) 0.252 (6.40 mm) 0.45 (1.14 mm) TYP. Description The AS006L2-01 is a GaAs IC FET SPDT low loss reflective switch. This broadband switch operates from DC–6 GHz. It is ideal for microstrip applications when requirements call for low insertion loss and medium isolation. The AS006L2-10 is the gullwing version of this device for surface mount applications. 0.160 (4.06 mm) 0.120 (3.05 mm) 0.031 (0.79 mm) MAX. 0.013 (0.33 mm) 0.007 (0.18 mm) 0.007 (0.18 mm) 0.003 (0.08 mm) 0.065 (1.65 mm) MAX. Electrical Specifications at 25°C Parameter1 Frequency5 Insertion Loss2 DC–1.0 GHz DC–2.0 GHz DC–4.0 GHz DC–6.0 GHz Isolation DC–1.0 GHz DC–2.0 GHz DC–4.0 GHz DC–6.0 GHz VSWR3 DC–1.0 GHz DC–4.0 GHz DC–6.0 GHz Min. 45 35 28 22 Typ. Max. Unit 0.5 0.7 1.0 1.3 0.7 0.9 1.2 1.5 dB dB dB dB 52 44 32 25 dB dB dB dB 1.2:1 1.3:1 1.9:1 1.3:1 1.5:1 2.0:1 Typ. Max. Unit 3 6 20 6 10 30 ns ns mV Operating Characteristics at 25°C Parameter Condition Frequency Min. Switching Characteristics Rise, Fall (10/90% or 90/10% RF) On, Off (50% CTL to 90/10% RF) Video Feedthru4 Input Power for 1 dB Compression Control Voltages (VC) 0/-5 V (0/-8 V) 0.5–6 GHz 0.001 GHz 21 12 24 (30) 16 (20) dBm dBm Intermodulation Intercept Point (IP3) For Two-tone Input Power 13 dBm 0.5–6 GHz 0.001 GHz 42 32 46 35 dBm dBm Control Voltages VLow = 0 to -0.2 V @ 20 µA Max. VHigh = -5 V @ 50 µA to -9 V @ 200 µA Max. 1. All measurements made in a 50 Ω system, unless otherwise specified. 2. Insertion loss changes 0.003 dB/°C. 3. Insertion loss state. 4. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth. 5. DC = 300 kHz. 6. See Quality/Reliability section. Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com Specifications subject to change without notice. 9/99A Powered by ICminer.com Electronic-Library Service CopyRight 2003 1 GaAs IC SPDT Low Loss Switch Reflective DC–6 GHz AS006L2-01, AS006L2-10 1.4 70 1.2 60 Isolation (dB) Insertion Loss (dB) Typical Performance Data 1.0 0.8 0.6 50 40 30 0.4 20 DC 1 2 3 4 5 6 DC 1 2 3 4 5 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency Isolation vs. Frequency Truth Table 6 Absolute Maximum Ratings V1 V2 J1–J2 J1–J3 0 -5 Isolation Insertion Loss Characteristic -5 0 Insertion Loss Isolation Value RF Input Power (RF In) 2 W > 500 MHz 0/-8 V 0.5 W @ 50 MHz 0/-8 V Control Voltage (VC) Pin Out J1 +0.2 V, -10 V Operating Temperature (TOP) -55°C to +125°C Storage Temperature (TST) -65°C to +150°C Thermal Resistance (ΘJC) 25°C/W -10 0.345 (8.76 mm) ± 0.010 (0.25 mm) 0.215 (5.46 mm) 0.385 (9.78 mm) ± 0.010 (0.25 mm) 0.080 (2.03 mm) TYP. J3 J2 0.045 (1.14 mm) TYP. 0.268 (6.81 mm) 0.252 (6.40 mm) 0.063 (1.60 mm) TYP. 2 GND V1 V2 GND 0.013 (0.33 mm) 0.007 (0.18 mm) 0.007 (0.18 mm) 0.003 (0.08 mm) 0.060 (1.52 mm) TYP. 0.130 (3.30 mm) TYP. 0.065 (1.65 mm) MAX. 0.030 (0.76 mm) 0.015 (0.038 mm) Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com Specifications subject to change without notice. 9/99A Powered by ICminer.com Electronic-Library Service CopyRight 2003 0.029 (0.74 mm) TYP.