DC - DC CONVERTER 10 Watt Low Profile Wide Input Range HDM11 Series Input Specifications Input Voltage Input Range Under Voltage Shutdown Isolation Voltage Isolation Resistance Input Filter Output Specifications Output Wattage Output Voltage Output Voltage Accuracy Line Regulation Load Regulation See rating chart 4:1 8VDC 1,500 VDC Min. 1000 M Ohms Pi Filter From $15 10 Watts See rating chart Main O/P ±2.0% Typ. ±0.5% Typ. Single O/P ±1.0% Typ. Dual O/P ±2.0% Typ. 100mV for 3.3V/5.0V&1.0% for others P-P OVP built in on Main O/P Fold back Typ. 78% 17.2Watts/Cubic inch 450KHz Fixed frequency Noise & Ripple Output Power Protection Output Short Circuit Efficiency Power Density Switching Frequency • 4:1 Input • Isolated Output • Low Profile 7mm • Six-Sided Shield OUTPUT VOLTAGE / CURRENT RATING CHARTS SINGLE OUTPUT Model Input Number Voltage VDC DUAL OUTPUT Input Current N.L. (mA) F.L. Output Output Model VDC (A) Number Input Input Output Voltage Current VDC N.L. (mA) F.L. Output (A) VDC HDM11-12D-S03 9.0-36.0 50 900 3.3V 2.50A HDM11-12D-D03 9.0-36.0 50 910 +/-3.3V 1.25A 1.25A HDM11-12D-S05 9.0-36.0 50 1070 5.0V 2.00A HDM11-12D-D05 9.0-36.0 50 1070 +/-5.0V 1.00A 1.00A 9.0-36.0 50 1070 +/-12.0V 0.42A 0.42A HDM11-12D-S09 9.0-36.0 50 1050 9.0V 1.10A HDM11-12D-D12 HDM11-12D-S12 9.0-36.0 50 1050 12.0V 0.83A HDM11-12D-D15 9.0-36.0 50 1040 +/-15.0V 0.33A 0.33A HDM11-12D-S15 9.0-36.0 50 1050 15.0V 0.67A HDM11-48D-D03 18.0-72.0 46 220 +/-3.3V 1.25A 1.25A HDM11-48D-S03 18.0-72.0 46 220 3.3V 2.50A HDM11-48D-D05 18.0-72.0 46 260 +/-5.0V 1.00A 1.00A HDM11-48D-S05 18.0-72.0 46 260 5.0V 2.00A HDM11-48D-D12 18.0-72.0 46 260 +/-12.0V 0.42A 0.42A HDM11-48D-D15 18.0-72.0 46 255 +/-15.0V 0.33A 0.33A HDM11-48D-S09 18.0-72.0 46 255 9.0V 1.10A HDM11-48D-S12 18.0-72.0 46 255 12.0V 0.83A HDM11-48D-S15 18.0-72.0 46 255 15.0V 0.67A MECHANICAL DIMENSIONS: MM [INCHES] (Not to Scale) 32 TOTAL POWER INT’L INC. TOLL FREE ORDER HOT LINE 1-877-646-0900