ETC 7-1437069-8

IDC Systems
Headers
PRODUCT DESCRIPTION
PCB Male Headers provide reliability,
convenience and positive polarization
when mated with Female Socket
Transition Connectors in PC board
applications which require repeated
connection and disconnection.
Optional retainer-ejector latches
easily disengage the header and
female socket, eliminating stress in
the cable termination and solder joint
areas during disconnect.
HEADERS
DESIGN ADVANTAGES
• Industry standard polarization
mates with center bump as well as
dual slot polarized female socket
connectors.
• Available in .050 x .100, .100 x
.100, .100 x .200 and .100 x .300
center spacing.
• Available in standard, low profile,
vertical eject, compliant pin and
surface mount configurations.
• Available in
materials.
high
temperature
HEADER INDEX
.050" x .100" 2-Row Straight Tail ............................................18
.050" x .100" 2-Row Right Angle Tails ....................................20
.050" x .100" 4-Row Right Angle Tails ....................................22
.050" x .100" 2-Row Unshrouded Header, Straight ................24
.050" x .100" 2-Row Unshrouded Header, Right Angle ..........25
.100" x .100" Straight Standard Header..................................26
.100" x .100" Right Angle Standard Header............................27
.100" x .100" High Temp. Straight Standard Header ..............28
.100" x .100" High Temp. Right Angle Standard Header ........29
.100" x .100" Low Profile Straight w/ejectors ........................30
.100" x .100" Low Profile Right Angle w/ejectors ..................31
.100" x .100" Low Profile Straight ..........................................32
.100" x .100" Low Profile Right Angle ....................................33
.100" x .100" Low Profile Straight, High Temp. ......................34
.100" x .100" Low Profile Right Angle, High Temp. ................35
.100" x .100" Low Profile Straight w/latches ..........................36
.100" x .100" Low Profile Right Angle w/latches ..................37
.100" x .100" Flex-Fit™ with Retainer/Ejector ........................38
.100" x .100" Flex-Fit™ Low Profile ......................................39
.100" x .100" Surface Mount ..................................................40
Pin Strip Headers, Single Row Straight ................................41
Pin Strip Headers, Single Row Right Angle ..........................42
Pin Strip Headers, Dual Row Straight ....................................43
Pin Strip Headers, Dual Row Right Angle ............................44
Dip Socket Headers, 14 and 16 Positions ............................45
Accessories..............................................................................46
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
17
LR92984
E60980
IDC Systems
Headers
2 ROW HEADER
STRAIGHT TAIL, WITH
OPTIONAL SPACE SAVING
VERTICAL EJECTORS
.050" x .100" CENTERS
LR49571
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0, infrared and vapor phase
process compatible
COLOR: Black
CONTACTS: Copper alloy, 30 microinches gold
over nickel in mating area, tin/lead plating in the
termination area.
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 0hms
DIELECTRIC STRENGTH: > 1000 VAC at sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE SOCKETS: See page 8
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
18
IDC Systems
Headers
2 ROW HEADER
STRAIGHT TAIL, WITH
OPTIONAL SPACE SAVING
VERTICAL EJECTORS
.050" x .100" CENTERS
Recommended Printed Circuit Board Layout
Ordering Information
CATALOG NUMBERS
PCB= 1.57MM (.062)
TAIL LENGTH (DIM B)= 2.90MM (.114)
W/O EJECTORS
W/ EJECTORS
CATALOG NUMBERS
PCB= 3.18MM (.125)
TAIL LENGTH (DIM B)= 4.48MM (.175)
W/O EJECTORS
W/EJECTORS
20
311-020D272
311-020D272E
311-020D372
26
311-026D272
311-026D272E
311-026D372
30
311-030D272
311-030D272E
34
311-034D272
311-034D272E
40
311-040D272
50
60
68
NUMBER
OF POS.
DIMENSIONS
A
C
311-020D372E
20.68 (.814)
11.43 (.450)
311-026D372E
24.49 (.964)
15.24 (.600)
311-030D372
311-030D372E
27.03 (1.064)
17.78 (.700)
311-034D372
311-034D372E
29.57 (1.164)
20.32 (.800)
311-040D272E
311-040D372
311-040D372E
28.80 (1.314)
24.13 (.950)
311-050D272
311-050D272E
311-050D372
311-050D372E
39.73 (1.564)
30.48 (1.200)
311-060D272
311-060D272E
311-060D372
311-060D372E
46.07 (1.814)
36.83 (1.450)
311-068D272
311-068D272E
311-068D372
311-068D372E
51.16 (2.014)
41.91 (1.650)
80
311-080D272
311-080D272E
311-080D372
311-080D372E
58.78 (2.314)
49.53 (1.950)
100
311-100D272
311-100D272E
311-100D372
311-100D372E
71.48 (2.814)
62.23 (2.450)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
19
IDC Systems
Headers
2 ROW HEADER
RIGHT ANGLE TAILS, WITH
OPTIONAL SPACE SAVING
VERTICAL EJECTORS
.050" x .100" CENTERS
LR49571
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0, infrared and vapor phase
process compatible
COLOR: Black
CONTACTS: Copper alloy, 30 microinches gold
over nickel in mating area, tin/lead plating in the
termination area.
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 0hms
DIELECTRIC STRENGTH: > 1000 VAC at sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE SOCKETS: See page 8
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
20
IDC Systems
Headers
FINE PITCH 2 ROW HEADER
RIGHT ANGLE TAILS, WITH
OPTIONAL SPACE SAVING
VERTICAL EJECTORS
.050" x .100" CENTERS
Recommended Printed Circuit Board Layout
Ordering Information
CATALOG NUMBERS
PCB= 1.57MM (.062)
TAIL LENGTH (DIM B)= 2.90MM (.114)
W/O EJECTORS
W/ EJECTORS
CATALOG NUMBERS
PCB= 3.18MM (.125)
TAIL LENGTH (DIM B)= 4.48MM (.175)
W/O EJECTORS
W/EJECTORS
20
311-020D072
311-020D072E
311-020D172
26
311-026D072
311-026D072E
311-026D172
30
311-030D072
311-030D072E
34
311-034D072
311-034D072E
40
311-040D072
50
60
NUMBER
OF POS.
DIMENSIONS
A
C
311-020D172E
20.68 (.814)
11.43 (.450)
311-026D172E
24.49 (.964)
15.24 (.600)
311-030D172
311-030D172E
27.03 (1.064)
17.78 (.700)
311-034D172
311-034D172E
29.57 (1.164)
20.32 (.800)
311-040D072E
311-040D172
311-040D172E
28.80 (1.314)
24.13 (.950)
311-050D072
311-050D072E
311-050D172
311-050D172E
39.73 (1.564)
30.48 (1.200)
311-060D072
311-060D072E
311-060D172
311-060D172E
46.07 (1.814)
36.83 (1.450)
68
311-068D072
311-068D072E
311-068D172
311-068D172E
51.16 (2.014)
41.91 (1.650)
80
311-080D072
311-080D072E
311-080D172
311-080D172E
58.78 (2.314)
49.53 (1.950)
100
311-100D072
311-100D072E
311-100D172
311-100D172E
71.48 (2.814)
62.23 (2.450)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
21
IDC Systems
Headers
4 ROW HEADER
RIGHT ANGLE TAILS, WITH
OPTIONAL SPACE SAVING
VERTICAL EJECTORS
.050" x .100" CENTERS
LR49571
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0, infrared and vapor phase
process compatible
COLOR: Black
CONTACTS: Copper alloy, 30 microinches gold
over nickel in mating area, tin/lead plating in the
termination area.
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >1 x 109 0hms
DIELECTRIC STRENGTH: > 1000 VAC at sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE SOCKETS: See page 8
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
22
IDC Systems
Headers
4 ROW HEADER
RIGHT ANGLE TAILS, WITH
OPTIONAL SPACE SAVING
VERTICAL EJECTORS
.050" x .100" CENTERS
Recommended Printed Circuit Board Layout
Ordering Information
CATALOG NUMBERS
PCB= 1.57MM (.062)
TAIL LENGTH (DIM B)= 2.90MM (.114)
W/O EJECTORS
W/ EJECTORS
CATALOG NUMBERS
PCB= 3.18MM (.125)
TAIL LENGTH (DIM B)= 4.48MM (.175)
W/O EJECTORS
W/EJECTORS
20
311-020072
311-020072E
311-020172
311-020172E
26
311-026072
311-026072E
311-026172
311-026172E
24.49 (.964)
15.24 (.600)
30
311-030072
311-030072E
311-030172
311-030172E
27.03 (1.064)
17.78 (.700)
34
311-034072
311-034072E
311-034172
311-034172E
29.57 (1.164)
20.32 (.800)
40
311-040072
311-040072E
311-040172
311-040172E
28.80 (1.314)
24.13 (.950)
50
311-050072
311-050072E
311-050172
311-050172E
39.73 (1.564)
30.48 (1.200)
60
311-060072
311-060072E
311-060172
311-060172E
46.07 (1.814)
36.83 (1.450)
68
311-068072
311-068072E
311-068172
311-068172E
51.16 (2.014)
41.91 (1.650)
80
311-080072
311-080072E
311-080172
311-080172E
58.78 (2.314)
49.53 (1.950)
100
311-100072
311-100072E
311-100172
311-100172E
71.48 (2.814)
62.23 (2.450)
NUMBER
OF POS.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
DIMENSIONS
A
C
20.68 (.814)
11.43 (.450)
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
23
IDC Systems
Headers
UNSHROUDED HEADER
2-ROW, STRAIGHT TAIL
.050" x .100" CENTERS
LR49571
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Black
CONTACTS: Copper alloy, 30 microinches gold
over nickel in mating area, tin/lead plating in the
termination area.
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >5 x 109 0hms
DIELECTRIC STRENGTH: > 600 VAC at sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE SOCKETS: See page 8
Ordering Information
NUMBER OF
POSITIONS
CATALOG
NUMBER
A
DIMENSIONS
B
20
311-D020ST2911
11.43 (.450)
12.70 (.500)
26
311-D026ST2911
15.24 (.600)
16.51 (.650)
30
311-D030ST2911
17.78 (.700)
19.05 (.750)
34
311-D034ST2911
20.32 (.800)
21.59 (.850)
40
311-D040ST2911
24.13 (.950)
25.40 (1.000)
50
311-D050ST2911
30.48 (1.200)
31.75 (1.250)
60
311-D060ST2911
36.86 (1.450)
38.10 (1.500)
68
311-D068ST2911
41.91 (1.650)
43.18 (1.700)
80
311-D080ST2911
49.53 (1.950)
50.80 (2.000)
100
311-D100ST2911
62.23 (2.450)
63.50 (2.500)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
24
IDC Systems
Headers
UNSHROUDED HEADER
2-ROW, RIGHT ANGLE
.050" x .100" CENTERS
LR49571
E60980
PHYSICAL PROPERTIES
INSULATION MATERIAL: Glass filled thermoplastic
rated UL 94V-0
COLOR: Black
CONTACTS: Copper alloy, 30 microinches gold
over nickel in mating area, tin/lead plating in the
termination area.
ELECTRICAL PROPERTIES
CURRENT RATING: 1 Amp
INSULATION RESISTANCE: >5 x 109 0hms
DIELECTRIC STRENGTH: > 600 VAC at sea level
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -55˚C TO 125°C
MATING CONNECTORS
FEMALE SOCKETS: See page 8
Ordering Information
NUMBER OF
POSITIONS
CATALOG
NUMBER
A
DIMENSIONS
B
20
311-D020RA2911
11.43 (.450)
12.70 (.500)
26
311-D026RA2911
15.24 (.600)
16.51 (.650)
30
311-D030RA2911
17.78 (.700)
19.05 (.750)
34
311-D034RA2911
20.32 (.800)
21.59 (.850)
40
311-D040RA2911
24.13 (.950)
25.40 (1.000)
50
311-D050RA2911
30.48 (1.200)
31.75 (1.250)
60
311-D060RA2911
36.86 (1.450)
38.10 (1.500)
68
311-D068RA2911
41.91 (1.650)
43.18 (1.700)
80
311-D080RA2911
49.53 (1.950)
50.80 (2.000)
100
311-D100RA2911
62.23 (2.450)
63.50 (2.500)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
25