CD43_ _40 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Dual SCR POW-R-BLOK™ Module 40 Amperes/1600 Volts OUTLINE DRAWING A B F E F L DIA. (2 TYP) G2 K2 K1 G1 H + K M5 THD (3 TYP) — C 110 TAB GATE TERMINAL A D J MARKING LOCATION G CD43_ _40 Dual SCR POW-R-BLOK™ Module 40 Amperes/1600 Volts Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. POW-R-BLOK™ has been tested and recognized by the Underwriters Laboratories (QQQX2 Power Semiconductors). Features: M Electrically Isolated Heatsinking M Metal Baseplate CONNECTION DIAGRAMS G2 K2 CD43 + M Low Thermal Impedance — K1 G1 M Quick Connect Gate Terminal M UL Recognized A Outline Drawing Applications: Dimension Inches Min. Max. Metric Min. Max. M Battery Supplies A 3.602 3.642 91.50 92.51 M Bridge Circuits B 3.145 3.155 79.88 80.14 M AC and DC Motor Control C 2.697 2.737 68.50 69.51 D 1.160 1.200 29.46 30.48 M Tap Changers E 0.783 0.793 19.88 20.14 F 0.783 0.793 19.88 20.14 G 0.228 0.240 5.80 6.10 H 0.374 0.414 9.50 10.51 1.256 31.1 J 1.224 K — — L∅ 0.240 0.250 31.9 M5 x 0.8 6.10 6.35 M Lighting Control Ordering Information: Select the complete eight digit module part number you desire from the table below. Example: CD431640 is a 1600 Volt, 40 Ampere Dual SCR POW-R-BLOK™ Module. Type CD43 Voltage Volts (x100) Current Rating Amperes 08 12 14 16 40 R-29 Powered by ICminer.com Electronic-Library Service CopyRight 2003 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CD43_ _40 Dual SCR POW-R-BLOK™ Module 40 Amperes/1600 Volts Absolute Maximum Ratings CD43_ _40 1400-1600 Characteristics Symbol Conditions 1200 Repetitive Peak Forward Blocking Voltage — 1200 1400-1600 Volts — 1200 1400-1600 Volts Non-Repetitive Peak Forward Blocking Voltage VDRM VRRM VDSM Non-Repetitive Peak Reverse Blocking Voltage VRSM — IT(RMS) IT(AV) TC = 86°C, 180° Conduction Repetitive Peak Reverse Blocking Voltage RMS Forward Current Average Forward Current Peak Half-Cycle Surge (Non-Repetitive) IT(AV) ITSM On-State Current — VDRM + 100 VRRM + 100 Volts 63 Amperes — TC = 81°C, 180° Conduction t = 8.3ms, Units 40 — Volts Amperes — 40 Amperes 750 680 Amperes 715 650 Amperes 2330 1930 A2sec 2560 2110 A2sec 100% VRRM Reapplied t = 10ms, 100% VRRM Reapplied I2t (for Fusing) for One-Cycle I2t t = 8.3ms, 100% VRRM Reapplied t = 10ms, Maximum Rate-of-Rise of On-State Current di/dt 100% VRRM Reapplied ITM = πIT(AV), tr < 0.5ms, tp > 6ms 150 Amperes/ms (Non-Repetitive)* Storage Temperature Operating Temperature Maximum Mounting Torque M5 Mounting Screw TSTG Tj — -40 to 125 °C — -40 to 125 °C — — 4.5 to 5.5 Nm Maximum Mounting Torque M5 Terminal Screw — — 2.7 to 3.3 Nm Module Weight (Typical) — — 140 Grams VRMS — 3500 5 V Isolation *Tj = 25°C, IG = 500mA, VD = 0.67VDRM (Rated) R-30 Powered by ICminer.com Electronic-Library Service CopyRight 2003 oz. Volts Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CD43_ _40 Dual SCR POW-R-BLOK™ Module 40 Amperes/1600 Volts Electrical Characteristics, Tj = 25°C unless otherwise specified CD43_ _40 Characteristics Blocking State Maximums Forward Off-State Current, Peak Reverse Off-State Current, Peak Conducting State Maximums Peak On-State Voltage Peak On-State Voltage Coefficients, Full Range Threshold Voltage, Low-Level Slope Resistance, Low-Level Threshold Voltage, High-Level Slope Resistance, High-Level Switching Minimums Critical Rate-of-Rise of Off-State Voltage Symbol Test Conditions 1200 1400-1600 Units IDRM IRRM Tj = 125°C 15 20 mA Tj = 125°C 15 20 mA VTM VTM V(TO)1 rT1 V(TO)2 rT2 ITM = 126A Tj = 125°C, I = 15% IT(AV) to ITSM VTM = A + B 1.75 1.77 A = 0.628 A = 1.033 B = 0.0698 B = 0.159 Volts C = 0.00444 C = 0.00486 A + B Ln I + C I + D Sqrt I D = 0.00977 D = -0.0569 Tj = 125°C, I = 15% IT(AV) to πIT(AV) Tj = 125°C, 0.862 1.24 Volts 6.55 4.40 mΩ 1.073 1.233 Volts I = πIT(AV) to ITSM 4.82 3.95 mΩ dv/dt Tj = 125°C, Gate Open, Linear to 0.67 VDRM 500 500 Volts/ms IGT VGT Tj = 25°C, VD = 6V Tj = 25°C, VD = 6V 100 100 mA Peak Forward Gate Current VGDM IGTM Tj = 125°C, VD = VDRM — Peak Reverse Gate Voltage VGRM — Gate Parameters Maximums Gate Current-to-Trigger Gate Voltage-to-Trigger Non-Triggering Gate Voltage 2.5 2.5 Volts 0.25 0.25 Volts 2.5 10 2.5 10 Amperes Volts R-31 Powered by ICminer.com Electronic-Library Service CopyRight 2003 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CD43_ _40 Dual SCR POW-R-BLOK™ Module 40 Amperes/1600 Volts Thermal Characteristics Characteristics Symbol Test Conditions Thermal Maximums Thermal Resistance, Junction-to-Case Ru(J-C) Per Module, Both Conducting Per SCR, Both Conducting Thermal Resistance, Case-to-Sink (Lubricated) Ru(C-S) R-32 Powered by ICminer.com Electronic-Library Service CopyRight 2003 Per Module CD43_ _40 0.300 Units °C/Watt 0.600 °C/Watt 0.1 °C/Watt Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CD43_ _40 Dual SCR POW-R-BLOK™ Module 40 Amperes/1600 Volts 1200 Volts MAXIMUM TRANSIENT THERMAL IMPEDANCE (JUNCTION-TO-CASE) MAXIMUM ON-STATE FORWARD VOLTAGE DROP MAXIMUM ON-STATE POWER DISSIPATION (SINUSOIDAL WAVEFORM) MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) 0.7 5 THERMAL IMPEDANCE, R(J-C), (oC/W) 4 3 2 1 0 101 102 0.5 0.4 0.3 0.2 0.1 0 10-4 103 10-3 10-2 10-1 100 60 120o 90o 50 60o 40 180o 30o u = 15o 30 20 10 0o 180o 360o CONDUCTION ANGLE 0 101 0 5 10 15 20 25 30 35 40 INSTANTANEOUS ON-STATE CURRENT, ITM, (AMPERES) TIME, t, (SECONDS) AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) MAXIMUM ALLOWABLE CASE TEMPERATURE (SINUSOIDAL WAVEFORM) MAXIMUM ON-STATE POWER DISSIPATION (RECTANGULAR WAVEFORM) MAXIMUM ALLOWABLE CASE TEMPERATURE (RECTANGULAR WAVEFORM) MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) 130 MAXIMUM CASE TEMPERATURE, TC, (oC) 0.6 120 0o 180o 360o CONDUCTION ANGLE 110 100 u = 15o 90 30o 60o 90o 120o 180o 80 70 0 5 10 15 20 25 30 35 40 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 90 130 360o 80 MAXIMUM CASE TEMPERATURE, TC, (oC) ON-STATE VOLTAGE, VTM, (VOLTS) Tj = 125oC 270o 70 180o 120o 90o 60 50 60o 30o 40 u = 15o 30 20 o 10 o o 0 180 360 CONDUCTION ANGLE 0 120 0o 180o 360o CONDUCTION ANGLE 110 100 90 u = 15o 30o 60o 90o 80 120o 180o 270o 360o 70 60 0 10 20 30 40 50 60 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 70 0 10 20 30 40 50 60 70 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) R-33 Powered by ICminer.com Electronic-Library Service CopyRight 2003 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CD43_ _40 Dual SCR POW-R-BLOK™ Module 40 Amperes/1600 Volts 1400-1600 Volts MAXIMUM TRANSIENT THERMAL IMPEDANCE (JUNCTION-TO-CASE) MAXIMUM ON-STATE FORWARD VOLTAGE DROP MAXIMUM ON-STATE POWER DISSIPATION (SINUSOIDAL WAVEFORM) MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) 0.7 5 THERMAL IMPEDANCE, R(J-C), (oC/W) 4 3 2 1 0 101 102 0.5 0.4 0.3 0.2 0.1 0 10-4 103 10-3 10-2 10-1 100 70 180o 120o 60 90o 50 60o 40 30o u = 15o 30 20 0o 180o 360o CONDUCTION ANGLE 10 0 101 0 5 10 15 20 25 30 35 40 INSTANTANEOUS ON-STATE CURRENT, ITM, (AMPERES) TIME, t, (SECONDS) AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) MAXIMUM ALLOWABLE CASE TEMPERATURE (SINUSOIDAL WAVEFORM) MAXIMUM ON-STATE POWER DISSIPATION (RECTANGULAR WAVEFORM) MAXIMUM ALLOWABLE CASE TEMPERATURE (RECTANGULAR WAVEFORM) MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) 130 MAXIMUM CASE TEMPERATURE, TC, (oC) 0.6 120 0o 180o 360o CONDUCTION ANGLE 110 100 u = 15o 90 30o 60o 90o 80 120o 180o 70 0 5 10 15 20 25 30 35 40 100 130 270o 90 80 MAXIMUM CASE TEMPERATURE, TC, (oC) ON-STATE VOLTAGE, VTM, (VOLTS) Tj = 125oC 360o 180o 70 120o 90o 60 60o 50 30o u = 15o 40 30 20 0o 180o 360o CONDUCTION ANGLE 10 120 0o 180o 360o CONDUCTION ANGLE 110 100 90 u = 15o 80 30o 60o 70 90o 120o 180o 270o 360o 60 0 0 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) R-34 Powered by ICminer.com Electronic-Library Service CopyRight 2003 10 20 30 40 50 60 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 70 0 10 20 30 40 50 60 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 70