E-Series Surface Mount Mixer 1635 - 2065 MHz EMRS-10H V3.00 Features ● ● ● SM-1 LO Power: +17 dBm Up to +13 dBm RF Surface Mount Specifications @ 25°C Frequency Range RF LO IF 1635 - 2065 MHz 935 - 1125 MHz 700 - 940 MHz Conversion Loss (dB) 1635 - 2065 MHz Typical 8.0 Maximum 9.0 Isolation (dB) LO to RF 935 - 1125 MHz LO to IF 935 - 1125 MHz Typical Minimum 33 28 23 18 Two Tone Third Order Input Intercept (dBm) Test Conditions RF1: 1970 MHz @ 0 dBm RF2: 1971 MHz @ 0 dBm LO: 1030 MHz @ +17 dBm IF1: 940 MHz IF2: 941 MHz VSWR LO RF IF +25 dBm Typical 1.6:1 2.2:1 1.5:1 Maximum 2.5:1 2.5:1 2.5:1 Pin Configuration Operating Characteristics Impedance 50 Ohms Nominal RF input for 1dB Compression + 13 dBm Ordering Information Part No. EMRS-10H EMRS-10HTR Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) Function LO RF IF Ground Pin No. 1 4 5 2,3,6 Packaging Tube Forward Tape & Reel Absolute Maximum Ratings Parameter RF Power Peak IF Current Storage Temperature Operating Temperature Pin Temperature (10 Seconds) Absolute Maximum 200 mW 40 mA -55°C to 100°C -10°C to 70°C 260°C S 0939 A Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020