E-Series Surface Mount Mixer 2 - 500 MHz EMRS-1MH, EMRSL-1MH V3.00 Features ● ● ● SM-1 LO Power: +13 dBm Up to +9 dBm RF Surface Mount Specifications @ 25°C Frequency Range RF LO IF 2 - 500 MHz 2 - 500 MHz DC - 500 MHz Conversion Loss (dB) 4 - 250 MHz 2 - 500 MHz Typical 5.7 6.0 Maximum 7.0 8.0 Isolation (dB) LO to RF 2 - 20 MHz 20 - 250 MHz 250 - 500 MHz LO to IF 2 - 20 MHz 20 - 250 MHz 250 - 500 MHz Typical Minimum 58 44 30 45 25 20 55 36 28 40 25 17 Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) Operating Characteristics Impedance 50 Ohms Nominal RF input for 1dB Compression + 9 dBm SM-24 Ordering Information Part No. EMRS-1MH EMRS-1MHTR EMRSL-1MH EMRSL-1MHTR Packaging SM-1 in Tubes SM-1 in Forward Tape & Reel SM-24 in Tubes SM-24 in Forward Tape & Reel Absolute Maximum Ratings Parameter RF Power Peak IF Current Storage Temperature Operating Temperature Pin Temperature (10 Seconds) Absolute Maximum 150 mW 40 mA -55°C to 100°C -55°C to 100°C 260°C Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) S 0065 B, S 0388 C Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 EMRS-1MH, EMRSL-1MH E-Series Surface Mount Mixer V3.00 Pin Configuration (Typical) Function LO RF IF Ground Pin No. 1 4 5 2, 3, 6 Specifications Subject to Change Without Notice. M/A-COM, Inc. 2 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020