POWER PLUG 20W AC/DC POWER SUPPLY REV. 01 POWER PLUG FEATURES ■ PRIMARY SWITCHED WALL PLUG-IN power supply ■ EUROPEAN INPUT VOLTAGE 230 Vac ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 20W SINGLE OUTPUT EMC COMPLIANCE ACCORDING TO EU DIRECTIVES SAFETY APPROVAL ACCORDING TO EN60950 / EN60065 CE MARKED OUTPUT VOLTAGE PRECISION: ±5% INPUT FUSE PROTECTION OUTPUT SHORT CIRCUIT PROTECTION 2 WIRES DC CORD 1.5 m TERMINATED WITH 5.5 mm (ext. diam.) / 2.5 mm (int. diam.) JACK CONNECTOR AVAILABLE WITH EU, UK PLUGS LOW STAND-BY POWER CONSUMPTION Plug Type Ordering Number EURO GSPP-1216STM/1 UK GSPP-1216STM/2 EURO PLUG UK PLUG October 2003 1/4 POWER PLUG 20W POWER PLUG DESCRIPTION The Power Plug is a high efficiency AC/DC switch mode constant voltage generator. Designed for a variety of residential applications, this wall plug-in power supply performs up to 20W output power. Typical reference value for the off the shelf solution is 12V 1.6A. Coming into a compact housing, the power plug can be assembled with EU or UK plug, identified by specific ordering numbers. Output DC power is ensured via a 2 wires cord with strain relief, terminated with a barrel connector. Typical weight is 100 grams only, without cable. ELECTRICAL CHARACTERISTICS (Tamb=25)C, unless otherwise specified.)GSPP-1216STM/x Symbol Parameter Test Condition Vi Input Voltage Io Output Current Tambient = 40ºC, Vi =187÷ 264 Vac Vo Output Voltage Vi =187÷ 264 Vac, Io= 0 ÷ Imax Vor Output Ripple Io = Imax Iosc Output short circuit current Hiccup Mode Efficiency PO = 20W Power losses in no load condition Vi = 230 VRMS, Io = 0 mA by Vis Isolation voltage Input to output Top Operating Ambient Temperature Tstg Storage Temperature Range n P stand Min. Typ. 187 11.4 12 Max. Unit 264 VRMS 1.6 A 12.6 V 200 mVpp 2 A 85 % 300 3000 mW VRMS 0 40 °C -20 70 °C AGENCY APPROVALS The Power Plug is certified by competent agencies to comply with most popular safety and EMC requirements, including but not limited to: EN60950 ETS300-342-1 EN60065 EN55022 Cl B 2/4 POWER PLUG 20W MECHANICAL DATA EURO plug version (dimensions in mm) MECHANICAL DATA UK plug version (dimensions in mm) 3/4 POWER PLUG 20W Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2003 STMicroelectronics - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China -Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 4/4