Agilent HDSP-301x/303x Series HDSP-561x/563x Series 10 mm and 13 mm Slim Font Seven Segment Displays Data Sheet Features • Excellent appearance • Slim font design • Mitered corners, evenly illuminated segments Description These slim font seven segment displays incorporate a new slim font character design. This slim font features narrow width, specially mitered segments to give a fuller appearance to the illuminated character. Faces of these displays are painted a neutral gray for enhanced on/off contrast. All devices are available in either common anode or common cathode configuration with right hand decimal point. • Gray face for optimum on/off contrast • Choice of colors: HER, green, yellow, and AlGaAs • Choice of character size: 10 mm and 13 mm • Characterized for luminous intensity Devices HER HDSP301E 303E 561E 563E Green HDSP301G 303G 561G 563G Yellow HDSP301Y 303Y 561Y 563Y AlGaAs HDSP301A 303A 561A 563A Description Common Anode, 10 mm Display Common Cathode, 10 mm Display Common Anode, 13 mm Display Common Cathode, 13 mm Display Part Numbering System 5082 - x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] A: AlGaAs Red E: High Efficiency Red G: Green Y: Yellow Device Specific Configuration[1] Refer to Respective Data Sheet Package[1] Refer to Respective Data Sheet Notes: 1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part-number. Color and Intensity Binbs are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective data sheet for specific bin limit information. 2 HDSP-301x/303x Series 6.00 (0.236) 2.54 ± 0.38 (0.100) 0.90 (0.035) 10° 10.00 (0.394) 1.85 (0.073) 1.20 Ø (0.047) 4 x 2.54 (0.400) 12.80 ± 0.25 (0.504) 0.53 ± 0.05 (0.021) 6.40 ± 0.25 (0.252) 7.00 ± 0.25 (0.276) 10.40 MIN. (0.409) 9.70 ± 0.25 (0.382) a 1 + + 6 2 + f + 7 g b + 8 3 + 4 + e d 0.30 ± 0.05 (0.012) 7.62 ± 0.38 (0.300) Pin 1 2 3 4 5 6 7 8 9 10 3 Function G F Common A/C E D DP C Common A/C B A 5 + c + 9 DP + 10 HDSP-561x/563x Series 45° 7.40 (0.292) 10° 1.25 (0.049) 13.00 (0.512) 15.24 ± 0.3 (0.600) 17.50 ± 0.3/–0.25 (0.689) 0.29 ± 0.08 TYP. (0.011) 1.25 Ø (0.049) 6.40 ± 0.25 (0.252) 3.60 ± 0.3 (0.142) 7.00 ± 0.25 (0.276) 12.25 ± 0.25 (0.482) 10 8 9 6 7 a f b g 0.58 ± 0.08 (0.023) 3.59 ± 0.3 TYP. (0.141) e c 2.54 ± 0.3 TYP. (0.100) 1 NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE ±0.25 mm. Pin 1 2 3 4 5 6 7 8 9 10 4 Function E D Common A/C C DP B A Common A/C F G DP d 2 3 4 5 Absolute Maximum Ratings Description Average Power per Segment or DP Peak Forward Current per Segment or DP DC Forward Current per Segment or DP Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Lead Solder Temperature for 3 Seconds 1.59 mm Below Seating Plane HER 105 90 30 –40 to +80 –40 to +80 5 260 Green 105 90 30 –40 to +80 –40 to +80 5 260 Yellow 105 90 30 –40 to +80 –40 to +80 5 260 AlGaAs 37 45 15 –20 to +80 –40 to +80 5 260 Units mW mA mA ˚C ˚C V ˚C Notes: 1. Derate above 33˚C at 0.34 mA/˚C for HER. 2. Derate above 27˚C at 0.32 mA/˚C for Green. 3. Derate above 30˚C at 0.33 mA/˚C for Yellow. 4. Derate above 60˚C at 0.25 mA/˚C for AlGaAs. Electrical/Optical Characteristics at TA = 25˚C HER Device Series HDSP301/303E Parameter Luminous Intensity/Segment (Digit Average) Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Thermal Resistance LED Junction-to-Pin Symbol IV Min. 1.251 Typ. 2.000 Max. Units mcd Test Conditions IF = 10 mA VF 1.90 2.50 V IF = 20 mA λPEAK λd IR RθJ–PIN 635 625 nm nm µA ˚C/W/Seg. IF = 20 mA IF = 20 mA VR = 5 V 100 351.5 HER Device Series HDSP561/563E 5 Parameter Luminous Intensity/Segment (Digit Average) Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Thermal Resistance LED Junction-to-Pin Symbol IV Min. 2.001 Typ. 3.526 Max. Units mcd Test Conditions IF = 10 mA VF 1.90 2.50 V IF = 20 mA λPEAK λd IR RθJ–PIN 635 625 nm nm µA ˚C/W/Seg. IF = 20 mA IF = 20 mA VR = 5 V 100 351.5 Green Device Series HDSP301/303G Parameter Luminous Intensity/Segment (digit average) Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Thermal Resistance LED Junction-to-Pin Symbol IV Parameter Luminous Intensity/Segment (Digit Average) Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Thermal Resistance LED Junction-to-Pin Symbol IV Min. 2.001 Typ. 3.200 Max. Units mcd Test Conditions IF = 10 mA VF 2.25 2.50 V IF = 20 mA λPEAK λd IR RθJ–PIN 568 573 nm nm µA ˚C/W/Seg. IF = 20 mA IF = 20 mA VR = 5 V 100 351.5 Green Device Series HDSP561/563G Min. 3.201 Typ. 5.601 Max. Units mcd Test Conditions IF = 10 mA VF 2.25 2.50 V IF = 20 mA λPEAK λd IR RθJ–PIN 568 573 nm nm µA ˚C/W/Seg. IF = 20 mA IF = 20 mA VR = 5 V 100 351.5 Yellow Device Series HDSP303/303Y 6 Parameter Luminous Intensity/Segment (Digit Average) Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Thermal Resistance LED Junction-to-Pin Symbol IV Min. 1.251 Typ. 2.000 Max. Units mcd Test Conditions IF = 10 mA VF 2.15 2.50 V IF = 20 mA λPEAK λd IR RθJ–PIN 589 590 nm nm µA ˚C/W/Seg. IF = 20 mA IF = 20 mA VR = 5 V 100 351.5 Yellow Device Series HDSP561/563Y Parameter Luminous Intensity/Segment (Digit Average) Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Thermal Resistance LED Junction-to-Pin Symbol IV Min. 2.00 Typ. 3.526 Max. Units mcd Test Conditions IF = 10 mA VF 2.15 2.50 V IF = 20 mA λPEAK λd IR RθJ–PIN 589 590 nm nm µA ˚C/W/Seg. IF = 20 mA IF = 20 mA VR = 5 V 100 351.5 Notes: 1. Typical specification for reference only. Do not exceed absolute maximum ratings. 2. The dominant wavelength, λ, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. AlGaAs Device Series HDSP301/303A Parameter Luminous Intensity/Segment (Digit Average) Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Thermal Resistance LED Junction-to-Pin Symbol IV Parameter Luminous Intensity/Segment (Digit Average) Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Thermal Resistance LED Junction-to-Pin Symbol IV Min. 0.320 Typ. 0.505 Max. Units mcd Test Conditions IF = 1 mA VF 1.80 2.20 V IF = 20 mA λPEAK λd IR RθJ–PIN 660 643 nm nm µA ˚C/W/Seg. IF = 20 mA IF = 20 mA VR = 5 V 100 351.5 AlGaAs Device Series HDSP561/563A Min. 0.506 Typ. 0.878 Max. Units mcd Test Conditions IF = 1 mA VF 1.80 2.20 V IF = 20 mA λPEAK λd IR RθJ–PIN 660 643 nm nm µA ˚C/W/Seg. IF = 20 mA IF = 20 mA VR = 5 V 100 351.5 Notes: 1. Typical specification for reference only. Do not exceed absolute maximum ratings. 2. The dominant wavelength, λ, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 7 Intensity Bin Limits (mcd) Green HDSP-301G/303G/561G/563G IV Bin Category Min. Max. K 1.800 3.600 L 2.800 5.600 Color Categories Color Green Yellow Bin 3 4 2 3 Dominant Wavelength (nm) Min. Max. 570.00 574.50 567.00 571.50 586.50 590.00 584.00 587.50 Yellow HDSP-301Y/303Y/561Y/563Y IV Bin Category Min. Max. I 1.100 2.200 K 1.800 3.600 HER HDSP-301E/303E/561E/563E IV Bin Category Min. Max. I 1.100 2.200 K 1.800 3.600 AlGaAs Red HDSP-301A/303A/561A/563A IV Bin Category Min. Max. F 0.280 0.560 G 0.450 0.900 8 Note: 1. All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information. HER 30 YELLOW 25 GREEN 20 15 10 AlGaAs 5 0 0 10 20 30 40 50 60 70 80 90 100110120 TA – AMBIENT TEMPERATURE – °C Figure 1. Maximum allowable DC current vs. ambient temperature. YELLOW 100 AlGaAs 80 HER 60 GREEN 40 20 0 0.0 1.0 2.0 3.0 4.0 5.0 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 5 mA FOR HER AND YELLOW AND TO 1 AT 10 mA FOR GREEN) 35 120 12 10 8 YELLOW HER 6 4 AlGaAs 2 GREEN 0 0 VF – FORWARD VOLTAGE – V 5 10 15 20 25 30 35 40 IF – DC FORWARD CURRENT – mA Figure 2. Forward current vs. forward voltage. Figure 3. Relative luminous intensity vs. DC forward current. RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 5 mA FOR HER AND YELLOW AND TO 1 AT 10 mA FOR GREEN) RθJ = 770°C/W IF – FORWARD CURRENT PER SEGMENT – mA IDC – MAXIMUM DC CURRENT PER SEGMENT – mA 45 40 IF – FORWARD CURRENT PER SEGMENT – mA HDSP-301x/303x Series HDSP-561x/563x Series IDC – MAXIMUM DC CURRENT PER SEGMENT – mA 45 RθJ = 770°C/W 40 35 HER 30 YELLOW 25 GREEN 20 15 10 AlGaAs 5 0 0 10 20 30 40 50 60 70 80 90 100110120 TA – AMBIENT TEMPERATURE – °C 120 YELLOW 100 AlGaAs 80 HER 60 GREEN 40 20 0 0.0 1.0 2.0 3.0 4.0 5.0 VF – FORWARD VOLTAGE – V Figure 4. Maximum allowable DC current vs. ambient temperature. Figure 5. Forward current vs. forward voltage. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, 9 For information on soldering LEDs, please refer to Application Note 1027. 12 10 8 HER YELLOW 6 4 AlGaAs 2 GREEN 0 0 5 10 15 20 25 30 35 IF – DC FORWARD CURRENT – mA Figure 6. Relative luminous intensity vs. DC forward current. 40 www.semiconductor.agilent.com Data subject to change. Copyright © 2001 Agilent Technologies October 1, 2001 Obsoletes 5980-2919EN 5988-4352EN