LH1537AT/AAB/AABTR LH1537AB/AAC/AACTR 1 Form C Solid State Relay FEATURES • Two Versions, 6-pin and 8-pin • Break-before-make Operation • I/O Isolation, 5300 VRMS • Load Voltage, 250 V • On Resistance, Typ. 12 Ω • Linear, AC/DC Operation • Clean, Bounce-free Switching • Low Power Consumption • Surface Mountable Package Dimensions in Inches (mm) 6-pin DIP Pin One ID. 2 3 N/O 4 .256 (6.50) .248 (6.30) N/O 4 5 6 1 .343 (8.70) .335 (8.50) 2 3 .300 (7.62) Typ. .039 (1.00) Min. .150 (3.81) .130 (3.30) 4° Typ. • UL – File No. E52744 • CSA – Certification 093751 • VDE 0884 Approval N/C C AGENCY APPROVALS 18° Typ. .020 (.051) Min. .014 (.35) .010 (.25) .035 (0.90) .031 (0.80) .022 (0.55) .018 (0.45) .150 (3.81) .110 (2.79) .347 (8.82) .300 (7.62) .100 (2.54) Typ. APPLICATION • • • • • C 5 N/C 6 1 8-pin DIP General Telecom Switching Modems Instrumentation Programmable Controllers Industrial pin one ID 4 3 2 1 S1 S1' S2 S2' 8 7 6 5 .268 (6.81) .255 (6.48) 5 6 7 8 .390 (9.91) .379 (9.63) .045 (1.14) .030 (0.76) 1 2 .031 (0.79) 4° typ. 3 S1 S1' S2 S2' 4 .300 (7.62) typ. .150 (3.81) .130 (3.30) .050 (1.27) .022 (.56) .018 (.46) 10° .035 (.89) .020 (.51) .100 (2.54) typ. .250 (6.35) .230 (5.84) 3°–9° .012 (.30) .008 (.20) .130 (3.30) .110 (2.79) Part Identification 2000 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA www.infineon.com/opto • 1-888-Infineon (1-888-463-4636) OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany www.osram-os.com • +49-941-202-7178 Part Number Description LH1537AT 6-pin DIP, Tubes LH1537AAB 6-pin SMD, Tubes LH1537AABTR 6-pin SMD, Tape and Reel LH1537AB 8-pin DIP, Tubes LH1537AAC 8-pin SMD, Tubes LH1537AACTR 8-pin SMD, Tape and Reel 1 April 3, 2000-20 Package Dimensions in Inches (mm) Package Dimensions in Inches (mm) 6-pin SMD 8-pin SMD Pin one I.D. .343 (8.71) .335 (8.51) Pin one I.D. .268 (6.81) .255 (6.48) .256 (6.50) .248 (6.30) .390 (9.91) .379 (9.63) .050 (1.27) typ. .395 (10.03) .375 (9.63) .300 (7.62) typ. .052 (1.33) .048 (1.22) .039 (0.99) min. .150 (3.81) .130 (3.30) .0098 (.25) .0040 (.10) .045 (1.14) .030 (0.78) 3° to 7° 18° 4° typ. 4° .040 (1.016) .020 (0.508) .100 (2.54) .315 (8.00) min. .012 (0.31) .008 (0.20) .050 (1.27) typ. LOAD CURRENT (mA) IFON/OFF = 9 mA to 20 mA 90 IFON/OFF = 3 mA IFON/OFF = 4.5 mA IFON/OFF = 6 mA IFON/OFF = 7.5 mA LH1537 −20 10° .315 (8.00) typ. .010 (2.54) typ. Ambient Operating Temperature Range (TA) ........–40 to +85°C Storage Temperature Range (Tstg) ......................–40 to +150°C Pin Soldering Temperature (t=10 s max) (TS) .................. 260°C Input/Output Isolation Test Voltage, (t=1.0 s, IISO=10 µA max.) (VISO) ............................5300 VRMS Pole-to-Pole Isolation Voltage (S1 to S2)* (dry air, dust free, at sea level) ......................................1600 V LED Continuous Forward Current (IF) ..............................50 mA LED Reverse Voltage (IR≤10 µA) (VR) ................................8.0 V dc or Peak ac Load Voltage (IL≤50 µA) (VL) .....................250 V Continuous dc Load Current (IL) (Form C Operation).......................................................150 mA Peak Load Current (IP) (t=100 ms) (single shot) ...............................................500 mA Output Power Dissipation (continuous) (PDISS) 6-pin Package .............................................................500 mW 8-pin Package .............................................................600 mW 30 0 −40 .008 (.25) .004 (.10) .040 (1.02) .020 (.51) .100 (2.54) typ. 3° to 7° Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Ratings for extended periods of time can adversely affect reliability. 150 60 Radius .395 (10.03) .375 (9.52) .312 (7.80) .298 (7.52) Absolute Maximum Ratings, TA=25°C Recommended Operating Conditions 120 .031 (.79) typ. .150 (3.81) .130 (3.30) 0 20 40 60 80 AMBIENT TEMPERATURE (°C) * Breakdown occurs between the output pins external to the package. 2000 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA www.infineon.com/opto • 1-888-Infineon (1-888-463-4636) OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany www.osram-os.com • +49-941-202-7178 LH1537AT/AAB/AABTR 2 April 3, 2000-20 Electrical Characteristics, TA=25°C Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Parameter Sym. Min. Typ. Max. Units Test Conditions LED Forward Current for Switch Turn-on (NO) IFon — 2.0 3.0 mA IL=100 mA, t=10 ms LED Forward Current for Switch Turn-off (NO) IFoff 0.2 1.0 — mA VL=±200 mA LED Forward Current for Switch Turn-on (NC) IFon 0.2 0.6 — mA IL=100 mA, t=10 ms LED Forward Current for Switch Turn-off (NC) IFoff — 0.7 3.0 mA VL=±200 mA LED Forward Voltage VF 1.15 1.26 1.45 V IF=10 mA ON-resistance: (NO, NC) RON 8.0 12 20 Ω IF=5.0 mA (NO) 0 mA (NC) IL=50 mA (NC) OFF-resistance: (NO) ROFF 0.5 600 — GΩ IF=0 mA, VL=±100 V 0.1 5.0 — — 0.17 200 nA IF=0 mA, VL=±100 V (NC) — 0.02 1.0 µA IF=5.0 mA, VL=±100 V (NO, NC) — — 1.0 — 60 — — 15 — IF=0 mA, VL=50 V — 45 — IF=5.0 mA, VL=1.0 V — 15 — IF=5.0 mA, VL=50 V Input Output (NC) Off-state Leakage Current: (NO) Output Capacitance: (NO) — — (NC) IF=5.0 mA, VL=±100 V IF=0 mA (NO) IF=5.0 mA, VL=±250 V pF IF=0 mA, VL=1.0 V Pole-to-Pole Capacitance (S1 to S2) — — 0.5 — pF IF=0 mA Switch Offset: (NO) — — 0.15 — µV IF=5.0 mA (NO) IF=5.0 mA (NC) — 0.1 — (NC) IF=0 mA (NC) IF=5.0 mA (NO) Transfer Input/Output Capacitance CISO — 1.1 — pF VISO=1.0 V Turn-on Time (NO) ton 0.5 3.1 5.0 ms IF=10 mA, IL=37.5 mA VL=150 V* 0.5 2.3 4.5 — 1.2 4.5 — 1.6 4.5 0 0.6 — (NC) Turn-off Time (NO) toff (NC) Transfer OFF Time (NC off to NO on) ttfr 2000 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA www.infineon.com/opto • 1-888-Infineon (1-888-463-4636) OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany www.osram-os.com • +49-941-202-7178 IF=6.0 mA, IL=100 mA VL=50 V* ms IF=1.0 mA, IL=37.5 mA VL=STC V* IF=10 mA, IL=37.5 mA VL=150 V* ms IF=10 mA, IL=37.5 mA VL=150 V* LH1537AT/AAB/AABTR 3 April 3, 2000-20 Typical Performance Characteristics Figure 4. ON-resistance vs. Temperature Figure 1. LED Voltage vs. Temperature 40 LED FORWARD VOLTAGE (V) 1.6 30 CHANGE IN ON-RESISTANCE (%) NORMALIZED TO 25°C 1.5 IF=50 mA IF=20 mA 1.4 1.3 1.2 IF=1.0 mA 1.1 IF=2.0 mA 1.0 –40 IF=5.0 mA IF=10 mA –20 0 20 40 60 20 10 0 –10 –20 –30 –40 –40 80 –20 0 ac/dc ON-RESISTANCE VARIATION (%) (NORMALIZED TO DATA SHEET RON SPECIFICATION @ I F=5.0 mA) LED FORWARD VOLTAGE (V) 1.20 IL=100 mA 1.15 TYP. 1.10 MIN. 1.05 1.00 80 2 IF=5.0 mA 1 0 –1 –2 –20 0 20 40 60 0 80 4 8 12 16 20 LED FORWARD CURRENT (mA) AMBIENT TEMPERATURE (°C) Figure 6. Switch Capacitance vs. Applied Voltage Figure 3. LED Current for Switch Turn-off vs. Temperature 80 100 IL = 100 mA IF = 0 mA (NO) IF = 10 mA (NC) 70 80 60 CAPACITANCE (pF) 60 40 20 0 –20 –40 –60 –40 60 Figure 5. Variation in ON-resistance vs. LED Current Figure 2. LED Dropout Voltage vs. Temperature LED FORWARD CURRENT FOR SWITCH TURN-ON/OFF (%) NORMALIZED TO 25°C 40 AMBIENT TEMPERATURE (°C) AMBIENT TEMPERATURE (°C) 0.95 –40 20 50 40 NO 30 NC 20 10 0 –20 0 20 40 60 80 0 AMBIENT TEMPERATURE (°C) 2000 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA www.infineon.com/opto • 1-888-Infineon (1-888-463-4636) OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany www.osram-os.com • +49-941-202-7178 20 40 60 80 100 APPLIED VOLTAGE (V) LH1537AT/AAB/AABTR 4 April 3, 2000-20 Figure 7. Insertion Loss vs. Frequency Figure 10. Leakage Current vs. Applied Voltage at Elevated Temperatures (NO) 50 0.4 LEAKAGE CURRENT (nA) 0.35 R L=600 W INSERTION LOSS (dB) 0.3 0.25 0.2 0.15 0.1 40 85°C 30 20 70°C 10 50°C 0.05 0 0 10 2 10 3 10 4 10 0 5 50 100 FREQUENCY (Hz) 80 40 LEAKAGE CURRENT (nA) 50 A – NO IF = 10 mA VP = 10 V RL = 50 Ω B – NC 20 0 102 250 300 350 400 Figure 11. Leakage Current vs. Applied Voltage (NC) 100 40 200 APPLIED VOLTAGE (V) Figure 8. Output Isolation 60 150 TA = 25 °C IF = 10 mA 30 20 IF = 5.0 mA 10 0 103 104 105 106 0 107 50 100 150 200 250 300 350 400 APPLIED VOLTAGE (V) FREQUENCY (Hz) Figure 9. Leakage Current vs. Applied Voltage (NO) Figure 12. Leakage Current vs. Applied Voltage at Elevated Temperatures (NC) 600 LEAKAGE CURRENT (nA) LEAKAGE CURRENT (pA) IF=10 mA IF = 0 mA TA = 25°C 500 400 300 200 85 °C 70 °C 100 0 0 50 100 150 200 250 300 350 400 0 100 150 200 250 300 350 400 APPLIED VOLTAGE (V) APPLIED VOLTAGE (V) 2000 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA www.infineon.com/opto • 1-888-Infineon (1-888-463-4636) OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany www.osram-os.com • +49-941-202-7178 50 LH1537AT/AAB/AABTR 5 April 3, 2000-20 Figure 16. ton/toff vs. Temperature Figure 13. Switch Breakdown Voltage vs. Temperature 100 6 CHANGE IN TURN-ON/OFF TIME (%) NORMALIZED TO 25°C CHANGE IN BREAKDOWN VOLTAGE (%) NORMALIZED TO 25°C 8 4 2 0 –2 –4 –6 –8 –40 –20 0 20 40 60 IF=6.0 mA 80 NO (OFF) NC (ON) 60 40 20 NC (OFF) NO (ON) –20 –40 –60 –40 80 –20 20 40 60 80 Figure 17. NO Turn-on Time vs. LED Current 8 IF = 5 mA (NO) IF = 0 mA (NC) I L= 50 mA 8 6 TURN-ON TIME (ms) SWITCH OFFSET VOLTAGE (µV) 0 AMBIENT TEMPERATURE (°C) Figure 14. Switch Offset Voltage vs. Temperature 7 6 5 4 3 –40°C 4 25°C 85°C 2 2 1 0 20 30 40 50 60 70 80 0 90 0 10 AMBEINT TEMPERATURE (°C) 20 30 40 50 LED FORWARD CURRENT (mA) Figure 15. Switch Offset Voltage vs. LED Current Figure 18. NC Turn-off Time vs. LED Current 8 3.0 IL = 50 mA 2.5 6 TURN-OFF TIME (ms) SWITCH OFFSET VOLTAGE (µV) NO (OFF) NC (ON) NO (ON) AMBIENT TEMPERATURE (°C) 10 9 NC (OFF) 0 2.0 1.5 1.0 –40 °C 4 25 °C 85 °C 2 0.5 0 0 0 5 10 15 20 0 25 20 30 40 50 LED FORWARD CURRENT (mA) LED FORWARD CURRENT (mA) 2000 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA www.infineon.com/opto • 1-888-Infineon (1-888-463-4636) OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany www.osram-os.com • +49-941-202-7178 10 LH1537AT/AAB/AABTR 6 April 3, 2000-20 Figure 19. NC Turn-on Time vs. LED Current 5 –40 °C IL = 50 mA TURN-ON TIME (ms) 4 3 25 °C 2 1 85 °C 0 0 10 20 30 40 50 LED FORWARD CURRENT (mA) Figure 20. NO Turn-off Time vs. LED Current 5 TURN-OFF TIME (ms) 4 3 2 –40 °C 1 25 °C 85 °C 0 0 10 20 30 40 50 LED FORWARD CURRENT (mA) 2000 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA www.infineon.com/opto • 1-888-Infineon (1-888-463-4636) OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany www.osram-os.com • +49-941-202-7178 LH1537AT/AAB/AABTR 7 April 3, 2000-20