PBA 313 04 Bluetooth™ CDMA Radio Key Features • RF output power class 2 • Compliant with Bluetooth specification 1.1 • Forms a complete radio with only – an antenna – a reference frequency of – 12.00, 19.20, 19.68 or 19.80 MHz • Small outline BGA-package (10.2×14.0×1.8 mm) • Requires no external shielding • Optimized for CDMA applications • Operates with Qualcomms MSM 3300/5100 baseband controller Description The Bluetooth Radio from Ericsson Microelectronics is a short-range microwave frequency radio transceiver for Bluetooth communication links. Provided in a compact ceramic BGA package, the Bluetooth Radio is intended primarily for embedded applications and applications requiring a flexible form factor. No external shield is required due to the innovative self-shielding design. This solution enables extremely low hight implementations. With the addition of only an antenna, a reference frequency crystal, and digital control functionality, the PBA 313 04 forms a complete radio. As a result, designers can benefit from a pre-tested and ready-to-use device, providing a robust Bluetooth Radio function in the final OEM application. The Bluetooth Radio offers a combination of compact size, low power consumption, and cost effective assembly – with the ‘flip chip’ radio IC and some major components of the radio integrated into the ceramic carrier. This makes it ideal for Bluetooth communications applications in mobile phones. The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., USA. E Antenna Interface Block diagram Switch Antenna Filter RX Balun Bluetooth RF IC LP Filter TX Balun Data and Control Interface VCO Tank Clock Reference Hardware PBA 313 04 is a short-range microwave frequency radio transciever for Bluetooth communication links that are designed to operate in the globally available unlicensed ISM frequency band, 2.4–2.5 GHz. Fast frequency hopping (1600 channel hops/s) with 79 channels (2.402 to 2.480 GHz) and a maximum TX & RX bit rate of 1 Mbit/s. The implemented modulation technique is Gaussian Frequency Shift Keying (GFSK) with a BT product of 0.5. The channel bandwidth is 1 MHz and the frequency deviation is between 140 and 175 kHz. Control interface Antenna interface Ordering information The Bluetooth Radio is built around a BiCMOS ASIC. Antenna filter, RX and TX baluns are all integrated into the ceramic carrier. Operating from a 2.8 V supply voltage, the device has a typical supply current requirement of only 50 mA (receive mode) or 40 mA (transmit mode), thus helping to extend battery life for portable equipment. A standby mode provides further power savings. Operation together with the MSM 3300/5100 chipset and software from Qualcomm is recommended. 50 Ω Bluetooth ISM band antenna (2.4–2.5 GHz). This Bluetooth Radio from Ericsson Microelectronics may be ordered as: PBA 313 04. Information given is believed to be accurate and reliable. However no responsibility is assumed for the consequences of its use nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Ericsson Microelectronics. These products are sold only according to Ericsson Microelectronics’ general conditions of sale,unless otherwise confirmed in writing. Product specifications subject to change without notice. Ericsson Microelectronics SE-164 81 Kista, Sweden Telephone: +46 8 757 50 00 www.ericsson.com/microelectronics For local sales contacts, please refer to our website or call: Int + 46 8 757 47 00, Fax: +46 8 757 47 76 The latest and most complete information can be found on our website. Product Brief EN/LZT 146 58 R1E © Ericsson Microelectronics AB, August 2001