ETC SWA010

PAGE:
SAFETY DATA SHEET
1 of 4
PRINT DATE:
REF:
06/08/1997
SWA400H,
SWA400S
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE
COMPANY/UNDERTAKING
Product name:
SAFEWASH 2000
Product code:
SWA400H, SWA400S
Supplier:
ELECTROLUBE
H.K. Wentworth Ltd.,
Wentworth House, Blakes Road,
Wargrave, Berkshire, RG10 8AW, United Kingdom.
Fax No: 0118 9403084
0118 9404031
Emergency telephone number:
2. COMPOSITION/INFORMATION ON INGREDIENTS
Identification of the preparation
Chemical Name
ETHANOLAMINE
CAS-No
141-43-5
EEC-No
603-030-00-8
METHOXYPROPOXYPROPANOL
BUTANE
Non hazardous material
34590-94-8
106-97-8
-
203-448-7
-
Class
Xn; R20 Xi;
R36/37/38
R10
F+; R12
-
Weight %
<10
<10
5
>75
3. HAZARDS IDENTIFICATION
Most important hazards:
Specific hazards
Non hazardous.
Aerosol dispensers, compressed liquefied gas. High
concentration of vapours may induce unconsciousness / narcosis.
May cause skin irritation and/or dermatitis.
4. FIRST AID MEASURES
General advice:
Inhalation:
Skin contact:
Eye contact:
Ingestion:
Remove from exposure, lie down.
Move to fresh air
Wash off immediately with soap and plenty of water. Treat frostbitten areas as
needed
Flush eye(s) immediately with plenty of water. If eye irritation persists, consult a
specialist.
Clean mouth with water and drink afterwards plenty of water. Consult a physician
if necessary.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media:
Extinguish with carbon dioxide, dry chemical, foam or waterspray.
Extinguishing media which must not be used for safety reasons:
Not applicable.
Specific hazards:
Not applicable.
Special protective equipment for firefighters:
Wear self contained breathing apparatus for fire fighting if necessary
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Environmental precautions:
Wear suitable gloves and eye/face protection
No special environmental precautions required.
Product name:
SAFEWASH 2000
PAGE:
2 of 4
PRINT DATE:
06/08/1997
SWA400H,
SWA400S
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust). Keep in suitable,
closed containers for disposal.
REF:
Methods for cleaning up:
7. HANDLING AND STORAGE
Handling:
Storage:
Use only in well-ventilated areas. Avoid contact with the skin and the eyes.Do not breath
vapours or spray mist. When using, do not eat, drink or smoke.
Keep containers tightly closed in a cool, well-ventilated place < 45°c
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Chemical Name:
ETHANOLAMINE
METHOXYPROPOXYPROPANOL
BUTANE
National occupational exposure limits:
Long term (8 hrs) = 100 ppm
Long term (8 hrs) = 600 ppm
Short term (15 min) = 750 ppm
-
Non hazardous material
Engineering measures
Ensure adequate ventilation, especially in confined areas.
Personal protection equipment:
- Respiratory protection:
No special precautions required.
- Hand protection:
Latex gloves.
- Eye protection:
No special precautions required.
- Skin and body protection:
No special precautions required
Hygiene measures:
In accordance with local and national regulations.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form:
Colour:
Odour:
pH:
Boiling point/range:
Flash point:
liquid
green
characteristic
( 20 °C)
Vapour pressure:
( 20 °C)
Relative density:
( 20 °C)
Solubility:
Water solubility
( 20 °C)
Viscosity:
( 15 °C)
11 - 13
100
does not
flash
< 1.3
(MELA)
>= 0.99
<= 1.10
completely
miscible
5 - 10
°C
°C
hPa
(g/l)
mPa.s
10. STABILITY AND REACTIVITY
Stability:
Conditions to avoid:
Materials to avoid:
Hazardous decomposition products:
Stable. Incompatible with strong acids and oxidizing agents.
strong acids and oxidizing agents
No decomposition if stored and applied as directed
SAFEWASH 2000
Product name:
PAGE:
3 of 4
PRINT DATE:
06/08/1997
REF:
SWA400H,
SWA400S
11. TOXICOLOGICAL INFORMATION
Acute toxicity:
Local effects:
Ethanolamine: LD50/oral/rat = 1.7 - 2.7g/kg
Prolonged skin contact may cause skin irritation and/or dermatitis.
Contact with eyes may cause irritation
Not applicable
Did not show carcinogenic, teratogenic or mutagenic effects in
animal experiments
Not applicable
Sensitization:
Long term toxicity:
Chronic toxicity:
12. ECOLOGICAL INFORMATION
Mobility:
Persistence and degradability:
Bioaccumulation:
Ecotoxicity effects:
Soluble in water.
Readily biodegradable, according to appropriate OECD test
Not applicable
Not applicable
13. DISPOSAL CONSIDERATIONS
Waste from residues / unused products:
Contaminated packaging:
In accordance with local and national regulations.
Do not pierce or burn even when empty
14. TRANSPORT INFORMATION
UN-No:
1950
ADR/RID
Class:
Marine pollutant:
2
No
Item:
HI/UN No:
5ºA
1950
Proper shipping name: Aerosol dispensers
IMO
Class:
EmS:
Proper shipping name:
ICAO
Class:
Proper shipping name
-
IMDG Page:
MFAG:
-
Aerosol dispensers
2.2
UN/ID No:
Aerosols, non flammable, n.o.s.,
1950
15. REGULATORY INFORMATION
Classification according to European directive on classification of hazardous preparations 90/492/EEC
- Contains:
- Symbol(s):
R-phrase(s):
S-phrase(s):
S2 - Keep out of reach of children. S3 - Keep in a cool place..
16. OTHER INFORMATION
Recommended use:
Recommended restrictions:
Revision number:
Further information:
The level of Ethanolamine is below levels at which it produces
irritant/harmful effects.
7
CN no: 34029090.
Flammable composition = 10%
Product name:
SAFEWASH 2000
PAGE:
4 of 4
PRINT DATE:
06/08/1997
REF:
SWA400H,
SWA400S
Contact Name: Carolyn Booth
Department: Technical
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication The
information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be
considered a warranty or quality specification The information relates only to the specific material designated and may not be valid for such material
used in combination with any other materials or in any process unless specified in the text
Technical Data Sheet
PRODUCT DESCRIPTION:
Safewash 2000
DATE:
03/97
PRODUCT CODE:
SWA400H
PAGES:
1
PRODUCT DESCRIPTION
An aerosol containing a unique blend of biodegradable solvents in an aqueous medium formulated to replace CFCs or highly flammable cleaning solvents in electronic applications. A full range of bulk Safewash
is also available for use in utrasonic and pressure spray applications.
PRODUCT USE
Excellent flux removal properties ensure fast and effective cleaning of printed circuit boards, electronic
assemblies and print screens. The unique foaming action dissolves and lifts dirt/ flux from the surface. The
foam ensures good contact time, hence economical use of the product.
FEATURES
*
*
*
*
*
100% Ozone Friendly
Biodegradable
Fast, effective foam action
Low corrosivity
Cleans to MIL P 28809A
APPLICATION
Spray aerosol onto area to be cleaned. Leave foam on assembly for 2 to 3 minutes. Brushing may be
required to remove stubborn deposits. Rinse thoroughly with tapwater and then rinse off with Saferinse
2000 which removes the last trace of ions and aids drying. Dry with warm air, or with Electrolube
Airduster. Test before use on sensitive materials eg. ABS, Acrylic, Polycarbonate, Polystyrene.
TYPICAL PROPERTIES
Boiling Point
Flash Point
100°C
None
PACKAGING
ORDER CODE
400 ml Aerosol with integral brush
SWA400H
Copyright Electrolube 1997
All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification.
Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must
satisfy themselves as to the suitability of the product.
ELECTROLUBE Wentworth House, Blakes Road, Wargrave, Berkshire, RG10 8AW, UK
Telephone: +44(0) 118 940 4031/ 3014 Fax: +44(0) 118 940 3084
ISO 9002 Registered Firm. Certificate No. FM 32082