Bulletin PD-2.293 rev. B 05/02 181NQ...(R) SERIES SCHOTTKY RECTIFIER 180 Amp D-67 Description/ Features Major Ratings and Characteristics Characteristics 181NQ... Units IF(AV) Rectangular 180 A VRRM range 30 to 45 V IFSM @ tp = 5 µs sine 22,000 A 0.56 V - 55 to 175 °C waveform VF @ 180Apk, TJ=125°C TJ range The 181NQ high current Schottky rectifier module series has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. 175° C TJ operation Unique high power, Half-Pak module Replaces three parallel DO-5's Easier to mount and lower profile than DO-5's High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term 181NQ045 Lug Terminal Anode Base Cathode 181NQ045R Lug Terminal Cathode Base Anode Outline D-67 HALF PAK Module Dimensions in millimeters and (inches) www.irf.com 1 181NQ...(R) Series Bulletin PD-2.293 rev. B 05/02 Voltage Ratings Part number VR 181NQ030 181NQ035 181NQ040 181NQ045 30 35 40 45 Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 181NQ Units IF(AV) Max. Average Forward Current * See Fig. 5 IFSM 180 Max. Peak One Cycle Non-Repetitive 22,000 A A Surge Current * See Fig. 7 2500 EAS Non-Repetitive Avalanche Energy 243 mJ IAR Repetitive Avalanche Current 36 A Conditions 50% duty cycle @ TC = 125° C, rectangular wave form 5µs Sine or 3µs Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 °C, IAS = 36 Amps, L = 0.38 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM 181NQ Units Max. Forward Voltage Drop (1) Conditions 0.66 V @ 180A 0.80 V @ 360A 0.56 V @ 180A 0.69 V @ 360A Max. Reverse Leakage Current (1) 15 mA TJ = 25 °C * See Fig. 2 135 mA TJ = 125 °C CT Max. Junction Capacitance 7800 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 6.0 nH From the top of terminal hole to mounting plane 10000 V/ µs * See Fig. 1 IRM dv/dt Max. Voltage Rate of Change (Rated VR) TJ = 125 °C VR = rated VR (1) Pulse Width < 300µs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 181NQ Units TJ Max. Junction Temperature Range -55 to 175 Tstg Max. Storage Temperature Range -55 to 175 °C RthJC Max. Thermal Resistance Junction to Case 0.30 °C/W DC operation RthCS Typical Thermal Resistance, Case to Heatsink 0.10 °C/W Mounting surface , smooth and greased wt Approximate Weight T Mounting Torque Terminal Torque Case Style 2 TJ = 25 °C Conditions °C * See Fig. 4 25.6 (0.9) g (oz.) Min. Max. 40 (35) 58 (50) Min. 58 (50) Max. 86 (75) Non-lubricated threads Kg-cm (Ibf-in) HALF PAK Module www.irf.com 181NQ...(R) Series Bulletin PD-2.293 rev. B 05/02 1000 1000 T =175°C J ReverseCurrent - I (mA) R 100 150°C 10 125°C 1 100°C 75°C .1 50°C .01 25°C .001 0 5 10 15 20 25 30 35 40 45 ReverseVoltage- VR(V) T =175°C J Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage T =125°C J 10000 T = 25°C J JunctionCapacitance- C (pF) T InstantaneousForwardCurrent - I (A) F 100 10 1 0 .2 .4 .6 .8 T =25°C J 1000 0 1 10 ForwardVoltageDrop- V (V) FM 20 30 40 50 ReverseVoltage- VR(V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance- ZthJC (°C/W ) 1 D=0.50 .1 D=0.33 D=0.25 P DM D=0.17 t 1 t2 D=0.08 .01 Notes: 1. Dutyfactor D= t1/ t 2 SinglePulse (Thermal Resistance) .001 .00001 .0001 .001 2. PeakT =P xZ +T J DM thJC C .01 .1 1 10 100 t , Rectangular PulseDuration(Seconds) 1 Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 181NQ...(R) Series Bulletin PD-2.293 rev. B 05/02 150 181NQ RthJC (DC) =0.30°C/W 170 AveragePower Loss- (W atts) AllowableCaseTemperature- (°C) 180 160 150 DC 140 130 0 40 80 D=0.08 D=0.17 125 D=0.25 D=0.33 100 D=0.50 75 DC RMSLimit 50 25 0 0 120 160 200 240 280 40 80 120 160 200 240 280 AverageForwardCurrent - I (A) F(AV) AverageForwardCurrent - IF(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics 100000 Non-Repetitive Surge Current - I FSM (A) At Any Rated Load Condition And With Rated VRRM Applied Following Surge 10000 1000 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L D UT IRFP460 R g = 25 oh m C URRE NT M O N ITO R H IG H-SPE ED SW ITC H FRE E-W H EEL D IO D E + V d = 25 V olt 40H FL40 S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com 181NQ...(R) Series Bulletin PD-2.293 rev. B 05/02 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 05/02 www.irf.com 5