Dual In-Line Transition Connector Series 8399 Series 8399 dual in-line transition connector is available in industry standard sizes of 10-64 positions. It will accommodate Series 2026 0.050" (1.27mm) ribbon cable, and is available with or without strain relief and has an optional cable stop facility. It forms a simple and cost effective method of terminating IDC ribbon cable to a PCB. TECHNICAL SPECIFICATION Voltage Rating: 350V DC or AC peak Operating Temperature: -55ºC to +105ºC Contact - Copper alloy Insulation Resistance: >1000 megohms Contact Plating: Tin lead Dielectric Withstanding Voltage: 1050 DC or AC peack Wire Gauge: 26 AWG Solid & Stranded 28 AWG Solid & Stranded Material: Molding - UL94VO rated glass filled grey polyester UL File No. E90723 CSA File No. 1255749 Current Rating: 1 ampere PCB FOOTPRINT WITHOUT STRAIN RELIEF PCB FOOTPRINT WITH STRAIN RELIEF WITH STRAIN RELIEF WITHOUT STRAIN RELIEF DIMENSIONS: millimeters (inches) No. of Positions 010 014 016 020 026 034 040 050 060 064 24 A 18.45 (0.726) 23.53 (0.926) 26.07 (1.03) 31.15 (1.23) 38.77 (1.53) 48.93 (1.93) 56.55 (2.23) 69.25 (2.73) 81.95 (3.23) 87.03 (3.42) B 10.16 (.400) 15.24 (.600) 17.78 (.700) 22.86 (.900) 30.48 (1.20) 40.64 (1.60) 48.26 (1.90) 60.96 (2.40) 73.66 (2.90) 78.74 (3.10) ELCO P 4 6 7 9 12 16 19 24 39 31 C 20.27 (0.798) 25.65 (1.01) 28.19 (1.11) 33.27 (1.31) 40.89 (1.61) 51.05 (2.01) 58.67 (2.31) 71.37 (2.81) 84.07 (3.31) 89.15 (3.51) Dual In-Line Transition Connector Series 8399 CUSTOMER APPLICATION TOOLING A standard hand press set and platen is available. See page 27. ORDERING CODE 00 8399 016 00 Connector Code Prefix 00 = Standard Series Number Number of Contacts 010 = 10 position 014 = 14 position 016 = 16 position 020 = 20 position 026 = 26 position 034 = 34 position 040 = 40 position 050 = 50 position 060 = 60 position 064 = 64 position Strain Relief 00 = Without strain relief 01 = With strain relief ELCO 0 Cable Stop 0 = Without cable stop Standard 1 = With cable stop Special 2 02 Contact 2 = 3.6mm tail phosphor bronze 3 = 2.8mm tail phosphor bronze Plating 02 = Tin Lead 25