E-Series Surface Mount Mixer 935 - 960 MHz EMRS-5LX V3.00 Features ● ● ● SM-1 LO Power: +3 dBm Up to -1 dBm RF Surface Mount Specifications @ 25 °C Frequency Range RF LO IF 935 - 960 MHz 857 - 882 MHz 80 MHz Conversion Loss (dB) 935 - 960 MHz Typical 7.5 Maximum 8.5 Isolation (dB) LO to RF 857 - 882 MHz LO to IF 857 - 882 MHz Typical Minimum 25 20 30 22 Two Tone Third Order Input Intercept ( dBm) Typical +10 Test Conditions RF1: 935 MHz @ -10 dBm RF2: 936 MHz @ -10 dBm LO: 855 MHz @ +3 dBm Minimum +8 RF1: 950 MHz @ -10 dBm RF2: 951 MHz @ -10 dBm LO: 870 MHz @ +3 dBm Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) Pin Configuration Function LO RF IF Ground RF1: 960 MHz @ -10 dBm RF2: 961 MHz @ -10 dBm LO: 880 MHz @ +3 dBm Operating Characteristics Impedance Pin No. 1 4 5 2,3,6 50 Ohms Nominal RF input for 1dB Compression -1 dBm DC Polarity Negative Ordering Information Part No. EMRS-5LX EMRS-5LXTR Packaging Tubes Forward Tape & Reel Absolute Maximum Ratings Parameter Absolute Maximum RF Power 50 mW Peak IF Current 40 mA Storage Temperature -55°C to 100°C Operating Temperature -55°C to 100°C Pin Temperature (10 Seconds) 260°C S 0619 C Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020