FX5545G005 Vishay Industry Smallest and Low Profile 5W 1.5A DC/DC Buck Converter with High Output Density Power FEATURES • Fully integrated DC/DC converter • High efficiency over large load range • 100% duty cycle • Power density - more than 100W/inch3 • 1uA shutdown current • 2.7V to 6V input range (1Li+ and 3-cell NiCd or NiMH cells) • 1.8V to 3.3V output voltage • Programmable PWM/PSM controls • Low output ripple • BGA/LGA construction • Temperature range: - 40°C to + 85°C • No external components needed • Output power 5W • Maximum current 1.5A • Low profile The DC/DC converter is a programmable topology synchronized Buck converter for today’s continuous changing portable electronic market. The DC/DC converter provides flexibility of utilizing various battery configurations and chemistries such as NiCd, NiMH, or Li+ with an input voltage range of 2.7V to 6V. An additional flexibility is provided with topology programmability to power multiple loads such as power amplifiers, microcontrollers, or baseband logic IC’s. For ultra-high efficiency, converters are designed to operate in sychronous rectified PWM mode under full load while transforming into externally controlled pulse-skipping mode (PSM) under light load. The DC/DC converter is available in 20-ports BGA package. In order to satisfy the stringent ambient temperature requirements, the DC/DC converter is designed to handle the industrial temperature range of - 40°C to + 85°C. APPLICATION • • • • • • • • • Cordless phones, PDAs and others Supply voltage source for low-voltage chip sets Portable computers Battery back-up supplies Cameras Routers Fiber optics LANS Image processing ORDERING INFORMATION FX 5545 G005 FUNCTION SIZE CIRCUIT IDENTIFIER OUTPUT VOLTAGE-Example: 2.7V should be written as 2V7 as the V indicates the decimal point, or ADJ for adjustable version - self selectable output voltage. PACKAGING-B1 = 10pcs in bulk; B5 = 50pcs in bulk; T1 = 13” reel; T2 = 7” reel. www.vishay.com 20 For technical questions, contact [email protected] For marketing questions, contact [email protected] Document Number: 10112 Revision 27-Nov-02 FX5545G005 Vishay 0.48 ± 0.01 [12.2 ± 0.25] A 0.1 ± 0.01 [2.54 ± 0.25] B 0.09 ± 0.01 [2.29 ± 0.25] C 0.09 ± 0.01 [2.27 ± 0.25] T 0.12 max [3 max] A W W L 0.58 ± 0.01 [14.7 ± 0.25] C A T L B DIMENSIONS in inches [millimeters] PIN CONFIGURATION* 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Marked on Upper Side *Note: Pin Description application note is available on page 32. **Note: if not used must be connected to Vin. RECOMMENDED PAD PATTERN in inches [millimeters] PIN 1, 2 3, 7 4, 8 5, 9 6, 10 11, 12 13, 17 14, 18 15, 19 16, 20 CONNECTION SD SYNC** N/C Vin PWM/PSM N/C GND Vout N/C GND A BOTTOM SIDE D A D F 0.1 ± 0.01 [2.54 ± 0.25] 0.03 ± 0.001 [0.8 ± 0.02] 0.02 ± 0.001 [0.5 ± 0.02] F A TAPE AND REEL See Tape and Reel Information - Type B Document Number: 10112 Revision 27-Nov-02 For technical questions, contact [email protected] For marketing questions, contact [email protected] www.vishay.com 21 FX5545G005 Vishay STANDARD ELECTRICAL SPECIFICATIONS PARAMETER UNIT Input Voltage Range VDC Insulation Test Voltage Resistance Leakage Current VAC Ω nA Output Power Voltage Voltage Tolerance Temp. Coefficient Ripple and Noise W VDC % %/°C mVpp General Package Weight gr. Temperature Operation Storage °C °C CONDITION MIN TYP MAX 2.7 60Hz 60sec VISO = 500VDC VISO = 500VDC 6 750 1 x 1011 5 5 1.8 to 3.3 at 25°C Ambient Temperature -5 +5 0.03 DC to 20MHz 100 1.5 - 40 - 55 Vout Vs. Iout + 85 + 125 Vout Vs. Vin 3.5 3.5 3.45 3.45 3.4 3.4 3.35 3.35 3.3 3.3 Vout (V) Vout (V) Vin = 3.6V 3.25 3.2 Iout = 0.5A Iout = 1.5A 3.25 3.2 3.15 3.15 3.1 3.1 3.05 3.05 3 3 0 0.5 1 1.5 2 3 4 5 6 Vin (V) Iout (A) ∆ Temp. Vs. Iout Efficiency Vs. Iout Above 25°C Ambient Temperature; For Vout = 3.3V; Vin = 6V Vout = 3.3V; Vin = 3.6V 30 100 90 25 Efficiency (%) 80 ∆ Temp (°C) 20 15 10 70 60 50 40 30 20 5 10 0 0 0 0.5 1 1.5 Iout (A) www.vishay.com 22 2 0 0.5 1 1.5 2 Iout (A) For technical questions, contact [email protected] For marketing questions, contact [email protected] Document Number: 10112 Revision 27-Nov-02