HCF4085B DUAL 2-WIDE 2-INPUT AND-OR INVERTER GATE ■ ■ ■ ■ ■ ■ ■ ■ MEDIUM-SPEED OPERATION tPHL = 90ns, tPLH = 125ns (Typ.) at 10V INDIVIDUAL INHIBIT CONTROLS QUIESCENT CURRENT SPECIFIED UP TO 20V STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT II = 100nA (MAX) AT VDD = 18V TA = 25°C 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC JESD13B "STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES" DESCRIPTION HCF4085B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. DIP SOP ORDER CODES PACKAGE TUBE T&R DIP SOP HCF4085BEY HCF4085BM1 HCF4085M013TR HCF4085B contains a pair of AND-OR INVERT gates, each consisting of two 2-input AND gates driving a 3-input NOR gate. Individual inhibit controls are provided for both A-O-I gates. PIN CONNECTION September 2002 1/8 HCF4085B INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL NAME AND FUNCTION 1, 2, 12, 13 5, 6, 8, 9 10, 11 3, 4 7 A1 to D1 A2 to D2 INHIBIT 1, 2 E1, E2 VSS Negative Supply Voltage 14 VDD Positive Supply Voltage Data Inputs Data Inputs Inhibit Control Inputs Data Outputs TRUTH TABLE A B X H X X H X ALL OTHER C D INHIBIT X X X X H H COMBINATIONS H L L OUT L L L H LOGIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol VDD Parameter Supply Voltage VI DC Input Voltage II DC Input Current Value Unit -0.5 to +22 V -0.5 to VDD + 0.5 ± 10 V mA 200 100 mW mW Top Power Dissipation per Package Power Dissipation per Output Transistor Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C PD Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. 2/8 HCF4085B RECOMMENDED OPERATING CONDITIONS Symbol VDD Parameter Value Supply Voltage VI Input Voltage Top Operating Temperature Unit 3 to 20 V 0 to VDD V -55 to 125 °C DC SPECIFICATIONS Test Condition Symbol IL VOH VOL VIH VIL IOH IOL II CI Parameter Quiescent Current High Level Output Voltage Low Level Output Voltage VI (V) 0/5 0/10 0/15 0/20 0/5 0/10 0/15 5/0 10/0 15/0 High Level Input Voltage Low Level Input Voltage Output Drive Current Output Sink Current Input Leakage Current Input Capacitance VO (V) 0/5 0/5 0/10 0/15 0/5 0/10 0/15 0/18 0.5/4.5 1/9 1.5/13.5 4.5/0.5 9/1 13.5/1.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 Value |IO| VDD (µA) (V) <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 Any Input Any Input 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 10 15 18 TA = 25°C Min. Typ. Max. 0.02 0.02 0.02 0.04 1 2 4 20 4.95 9.95 14.95 -40 to 85°C -55 to 125°C Min. Min. 30 60 120 600 4.95 9.95 14.95 0.05 0.05 0.05 4.95 9.95 14.95 3.5 7 11 1.5 3 4 -3.2 -1 -2.6 -6.8 1 2.6 6.8 ±0.1 5 7.5 0.05 0.05 0.05 1.5 3 4 V V 1.5 3 4 -1.1 -0.36 -0.9 -2.4 0.36 0.9 2.4 ±1 µA V 3.5 7 11 -1.15 -0.36 -0.9 -2.4 0.36 0.9 2.4 ±10-5 Max. 30 60 120 600 0.05 0.05 0.05 3.5 7 11 -1.36 -0.44 -1.1 -3.0 0.44 1.1 3.0 Max. Unit V mA mA ±1 µA pF The Noise Margin for both "1" and "0" level is: 1V min. with VDD =5V, 2V min. with VDD=10V, 2.5V min. with VDD=15V 3/8 HCF4085B DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200KΩ, tr = tf = 20 ns) Test Condition Symbol tPHL tPLH tPHL tPLH Parameter Propagation Delay Time (DATA) Propagation Delay Time (DATA) Propagation Delay Time (INHIBIT) Propagation Delay Time (INHIBIT) tTLH tTHL Transition Time VDD (V) 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 (*) Typical temperature coefficient for all VDD value is 0.3 %/°C. TEST CIRCUIT CL = 50pF or equivalent (includes jig and probe capacitance) RL = 200KΩ RT = ZOUT of pulse generator (typically 50Ω) 4/8 Value (*) Min. Unit Typ. Max. 225 90 65 310 125 90 150 60 40 250 100 70 100 50 40 450 180 130 620 250 180 300 120 80 500 200 140 200 100 80 ns ns ns ns ns HCF4085B WAVEFORM : PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle) 5/8 HCF4085B Plastic DIP-14 MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 1.39 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 6/8 HCF4085B SO-14 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45˚ (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8 ˚ (max.) PO13G 7/8 HCF4085B Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. © http://www.st.com 8/8