www.fairchildsemi.com LM201A/LM301A Single Operational Amplifier Features Description • • • • The LM201A and LM301A are general purpose operational amplifiers which are externally phase compensated, permit a choice of operation for optimum high frequency performance at a selected gain: unity gain compensation can be obtained with a single capacitor. Short circuit protection and latch free operation Slew rate of 10V/µs as a summing amplifier Class AB output provides excellent linearity Low bias current 8-DIP 1 8-SOP 1 Internal Block Diagram Rev. 1.0.1 ©2001 Fairchild Semiconductor Corporation LM201A/LM301A Schematic Diagram Absolute Maximum Ratings Parameter Supply Voltage Differential Input Voltage LM201A LM301A Unit VCC ±22 ±18 V VI(DIFF) 30 30 V Input Voltage VI ±15 ±15 V Output short Circuit Duration - Continuous Continuous - PD 500 500 mW Operating Temperature Range TOPR -25 ~ +85 0 ~ +70 °C Storage Temperature Range TSTG -65 ~ +150 - 65 ~ + 150 °C Power Dissipation 2 Symbol LM201A/LM301A Electrical Characteristics (TA =+25°C, VCC = +15V, VEE= -15V, unless otherwise specified) Parameter Input Offset Voltage Input Offset Current Input Bias Current Supply Current Large Signal Voltage Gain Symbol VIO Conditions RS<50KΩ Note 1 Average Temperature Coefficient of Input Offset Current (NOTE2) Input Voltage Range ∆VIO/∆T ∆IIO/∆T VI(R) 2.0 - 2.0 7.5 mV - - 3 - - 10 mV 1.5 10 - 4.5 50 nA - - 20 - - 70 nA - 40 75 - 60 250 nA - - 100 - - 300 nA VCC = ± 20V - 2.0 3.0 - - - mA VCC = ± 15V - - - - 2.0 3.0 mA VCC = ± 20V, TA = TA(MAX) - 1.7 2.5 - - - mA 50 160 - 25 160 - V/mV 25 - - 15 - - V/mV 3.0 15 6.0 30 µV/°C Note 1 Note 1 VCC= ± 15V, RL≥2KΩ, VO(P-P)= ± 10V Note 1 Average Temperature Coefficient of Input Offset Voltage (NOTE2) 0.5 Unit - IBIAS GV LM301A Min. Typ. Max. Min. Typ. Max. - IIO ICC LM201A - Note 1 - 25 °C ≤ TA ≤ TA(MAX) - 0.01 0.1 - 0.01 0.3 nA/°C TA(MIN) ≤ TA ≤ 25 °C - 0.02 0.2 - 0.02 0.6 nA/°C VCC = ± 20V Note 1 ± 15 - - - - - V VCC = ± 15V Note 1 - - - ± 12 - - V Common-Mode Rejection Ratio CMRR RS ≤ 50KΩ Note 1 80 100 - 70 95 - dB Power Supply Rejection Ratio PSRR RS ≤ 50KΩ Note 1 80 100 - 70 100 - dB ± 12 ± 14 - ± 12 ± 14 - V RL = 2.0KΩ ± 10 ± 13 - ± 10 ± 13 - V - 0.5 - MΩ Output Voltage Swing Input Resistance (NOTE2) VO(P-P) RL = 10KΩ VCC = ± 15V RI - 1.5 4.0 2.0 Note: 1. LM201A: -25 ≤ TA ≤ +85 °C , LM301A: 0 ≤ TA ≤ +70 °C 2. Guaranteed by design. 3 LM201A/LM301A Typical Performance Characteristics 4 Figure 1. Supply Current Figure 2. Voltage Gain Figure 3. Current Limiting Figure 4. Input Current Figure 5. Power Supply Rejection Figure 6. Common Mode Rejection LM201A/LM301A Mechanical Dimensions Package Dimensions in millimeters 0.060 ±0.004 #5 1.524 ±0.10 #4 0.018 ±0.004 #8 2.54 0.100 9.60 MAX 0.378 #1 9.20 ±0.20 0.362 ±0.008 ( 6.40 ±0.20 0.252 ±0.008 0.46 ±0.10 0.79 ) 0.031 8-DIP 5.08 MAX 0.200 7.62 0.300 3.40 ±0.20 0.134 ±0.008 3.30 ±0.30 0.130 ±0.012 0.33 0.013 MIN +0.10 0.25 –0.05 +0.004 0~15° 0.010 –0.002 5 LM201A/LM301A Mechanical Dimensions (Continued) Package Dimensions in millimeters 8-SOP MIN #5 6.00 ±0.30 0.236 ±0.012 8° 0~ -0.05 +0.10 -0.002 +0.004 MAX0.10 MAX0.004 0.15 0.006 0.50 ±0.20 0.020 ±0.008 6 1.80 MAX 0.071 3.95 ±0.20 0.156 ±0.008 5.72 0.225 0.41 ±0.10 0.016 ±0.004 #4 1.27 0.050 #8 5.13 MAX 0.202 #1 4.92 ±0.20 0.194 ±0.008 ( 0.56 ) 0.022 1.55 ±0.20 0.061 ±0.008 0.1~0.25 0.004~0.001 LM201A/LM301A Ordering Information Product Number Package LM201AN 8-DIP LM201AM 8-SOP LM301AN 8-DIP Operating Temperature -25 ~ +85 oC 0 ~ + 70 oC 7 LM201A/LM301A DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 6/1/01 0.0m 001 Stock#DSxxxxxxxx 2001 Fairchild Semiconductor Corporation