ETC P0420

COMMON MODE CHOKE
CATALOG
For DataCom and Power Applications
Click on blue-outlined text with the "hand tool" to navigate these sections.
Use the "next page" or "previous page" menu buttons to navigate the pages.
TABLE of CONTENTS
Common Mode Chokes for Datacom Applications
Surface Mount Common Mode Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6
Through Hole Common Mode Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-12
Common Mode Chokes & Inductors for Power Applications
Self-Leaded, SMT Common Mode Chokes & Inductors . . . . . . . . . . . . . . . . . . .13-14
Self-Leaded, SMT Common Mode Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16
Common Mode EMI Suppression Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
500 kHz Common Mode Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com
1
G002.F (10/02)
SELF-LEADED, SMT
COMMON MODE CHOKES
Suited for Power Applications
Solutions based on impedance,
size and current
Designed for DC/DC converters
Wide variety of inductor sizes
and current ratings available
Dielectric strength: 500 VRMS
Electrical Specifications @ 25°C — Operating Temperature -40°C to +120°C
Part
Number
RatedCurrent
For 55°C Rise
(Amps)
Inductance
(mH ±35%)
Leakage
Inductance1
@ 100 kHz
(µH NOM)
DCR (MAX)
(mΩ)
Impedance
Curve
(see # below)
Package
Weight
(Grams)
Quantity
In Tube
Quantity
In Reel
P0354
P0473
P0351
P0420
P0421
P0422
P0353
P0527
P0429
P0469
P0502
1.22
1.63
2.80
3.30
3.30
4.70
5.60
7.20
9.70
11.6
14.0
1.170
0.884
1.470
1.320
0.225
0.768
0.590
0.530
0.809
0.630
0.473
8.296
5.807
9.630
8.130
8.175
4.559
3.891
4.536
7.408
5.482
4.531
200
110
80
60
60
40
20
15
14
10
8
1
2
3
4
5
6
7
8
6
7
9
Polecat
Polecat
LCCI-50
LCCI-50
LCCI-50
LCCI-50
LCCI-50
HCCI-68
Big Foot
Big Foot
Big Foot
1.4
1.5
4.3
4.6
4.7
4.9
5.2
7.7
13.5
14.3
14.8
40
40
30
30
30
30
30
20
15
15
15
500
500
200
200
200
200
200
100
75
75
75
NOTE: Add suffix "T" to part number for tape and reel package (i.e. P0354T). 1. Leakage Inductance tested @ 100 kHz, 1140 mV, (1-2) with (3-4) shorted.
Impedance Curves
15K
7.5K
12K
6.0K
3
5
4
Impedance (Ω)
Impedance (Ω)
6
9K
1
2
6K
3K
7
4.5K
9
8
3.0K
1.5K
0
0
100 KHz
1 MHz
10 MHz
100 MHz
100 KHz
Frequency
1 MHz
10 MHz
100 MHz
Frequency
US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com
13
G002.F (10/02)
SELF-LEADED, SMT
COMMON MODE CHOKES
Suited for Power Applications
Mechanicals
Polecat
LCCI-50
.500 MAX
12,70
1
3
1
4X .175
4,45
4
2
3
1
1
2
4
4
Suggested Pad Layout
.390 MAX
9,91
.215 MAX
5,46
.410
10,41
.330
8,38
.650 MAX
16,51
.005/0,13
4 SURFACES
HCCI-68
.770 MAX
19,56
Big Foot
4X .080
2,03
1.000
25,40
.660
16,76
2
4
Suggested Pad Layout
.005/0,13
4 SURFACES
3
4X .060
1,52
.410
10,41
2
4X .175
4,45
R
R
3
4X .060
1,52
.500 MAX
12,70
.445
11,30
.670 MAX
17,02
.330
8,38
1
3
4
2
4X .300
7,62
1
R
1.097
27,86
3
4
2
1
3
.620
15,75
4
2
4
1.010
25,65
.155
3,94
1.220 MAX
30,99
Suggested Pad Layout
Suggested Pad Layout
.500 MAX
12,70
.395 MAX
10,03
1.000 ± .015
25,40 0,38
1.110 MAX
28,19
.400
10,16
.600
15,24
1.000 MAX
25,40
2
3
1
1.100
27,94
.006/0,15
4 SURFACES
.005/0,13
4 SURFACES
Schematic
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .005
0,13
1
3
2
4
US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com
G002.F (10/02)
14
SELF-LEADED SMT
COMMON MODE INDUCTORS
Suited for Power Applications
Pick and place compatible
Rated voltage 250Vac
Low RFI toroid
Tape & Reel packaging available
VDE approval and U.L. recognition pending
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C
Part
Number
I RMS
(Amps)
Inductance
(mH ±30%)
Leakage
Inductance 1
@ 100 kHz
(µH NOM)
DCR (MAX)
(mΩ)
SRF
(MHz)
Impedance
Curve
(see back page)
Size
Code
Weight
(Grams)
Quantity
In Tube
PE-53910
3.60
1.0
3.166
50
4
1
LCCI-3
5.3
30
PE-53911
1.50
1.0
3.960
60
2
2
LCCI-1
2.5
40
PE-53912
2.50
3.0
9.297
80
2.2
3
LCCI-3
5.2
30
PE-53913
1.00
10.0
39.390
450
0.5
4
LCCI-1
2.4
40
PE-53914
0.50
22.0
60.660
850
0.3
5
LCCI-1
2.4
40
NOTE: Add suffix "T" to part number for tape and reel package (i.e. P0354T). 1. Leakage Inductance tested @ 100 kHz, 1140 mV, (1-2) with (3-4) shorted.
Mechanical
Schematic
PE-5391X
E
A
1
2
P5391X
3
Date Code
Country of Origin
2
2
1
1
4X .060
1,52
4
4X .175
4,45
R
3
4
F
1:1 ±2%
4
3
Suggested Pad Layout
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .010
0,25
C
D
.005/0,13
4 SURFACES
B
Size
LCCI-1
A
.560/14,22
B
.645/16,38
C
.350/8,89
D
.520/13,21
E
.340/8,64
F
.530/13,46
LCCI-3
.670/17,02
.770/19,56
.390/9,90
.650/16,51
.445/11,30
.660/16,76
US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com
15
G002.F (10/02)
SELF-LEADED SMT
COMMON MODE INDUCTORS
Suited for Power Applications
Performance Description
The common mode choke family has been developed to
attenuate conductor noise (EMI) in systems. The designs
on high permeability toroidal cores, performs two different
filter functions. There is one winding for each of the two
polarity lines with the inductors coupled by a single core.
Common mode signals (referred to ground) are
suppressed by the full inductance of each coil. As an
added benefit, differential signals are attenuated by the
leakage inductance of the windings.
The full inductance in connection with capacitances
(0.1 to 1µF) connected to earth ground will yield filtering
results required for switch mode power supplies.
Impedance Curves
Impedance (Ω)
7K
5
4
6K
5K
3
4K
3K
2
2K
1
1K
0
0
0.01
0.1
1
10
100
Frequency (MHz)
Application Notes
Pulse can assist you with successful solutions to pass
world EMI/EMC standards such as FCC, VDE & IDE.
Our safe and cost effective products span the application
spectrum. EMI/EMC Control products include low power
signal filtering devices, toroidal inductor product
families and a wide selection of VDE/UL approved common
mode chokes.
Please call our applications engineering locations for EMC
technical support services including catalogs, samples,
measurements, screenroom testing or design assistance.
US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com
G002.F (10/02)
16
COMMON MODE EMI
SUPPRESSION INDUCTORS
Suited for Power Applications
Low profile or vertical mounting available
Windings balanced within one percent
For use in switching power supply input
filter circuits
Dielectric strength 1250 VRMS
Designed with 3.0 mm minimum creep
distance between windings
Electrical Specifications @ 25°C— Operating Temperature -30° to +130° C
Low Profile
Part
Number
Vertical
Mount Part
Number
Rated
RMS
Current 1
(Amps)
PE-62891
PE-62892
PE-62893
PE-62894
PE-62895
PE-62896
PE-62897
PE-62911
PE-62912
PE-62913
PE-62914
PE-62915
PE-62916
PE-62917
1.8
3.5
6.0
2.6
3.2
5.2
7.5
Load
VA 2 at
RMS Line
117 V 220 V
210
400
700
300
375
600
875
Leakage
Inductance Test Level
Inductance
at 1 kHz Volts RMS
130 kHz
(mH MIN)
1.0 kHz
(µH MIN)
420
800
1400
600
750
1200
1750
10.0
3.0
1.0
16.0
8.0
4.0
2.0
0.50
0.20
0.08
1.00
0.50
0.20
0.08
NOTES: 1. Rated RMS current for 40°C rise at any input voltage.
DCR
Max. each
WDG
(Ω)
Package
Number
0.240
0.060
0.020
0.160
0.120
0.040
0.020
1
1
1
2
2
2
2
130
35
12
180
90
45
25
Lead Diameter
Inches ± .003
Low
Vertical
Profile
Mount
0.032
0.032
0.036
0.032
0.032
0.036
0.047
0.032
0.032
0.036
0.040
0.040
0.036
0.047
2. Caution — do not exceed rated RMS current ratings.
Mechanicals
Low Profile Package
Vertical Package
A MAX
3mm Creepage
Spacer
1
3
A
2
G MAX
E
2
1
F
MAX MAX
4
MIN
MAX
DATE CODE
COUNTRY OF ORIGIN
E
C
D
A
PE-6291X
C
MAX
PE-6289X
(DATE CODE)
4
3
.200 MIN
5,08
B
MAX
C
B MAX
D
.200
MIN
5,08
Package
Package
Number
A
B
C
D
E
F
G
1
1.15
29,21
.550
13,97
.400
10,15
.800
20,32
.45
11,43
.015
0,38
1.15
29,21
2
1.44
36,57
.800
20,32
.600
15,24
.900
22,86
.70
17,78
.030
0,76
1.50
38,10
Unless otherwise specified, all tolerances are ± .010
0,25
Number
A
B
C
D
E
1
1.25
31,75
.600
15,24
1.00
25,40
.015
0,38
.900
22,86
2
1.50
38,10
.800
20,32
1.28
32,51
.010
0,25
1.083
27,50
Schematic
Dimensions: Inches
mm
1
2
3
4
US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com
17
G002.F (10/02)
500 kHz COMMON MODE
EMI INDUCTORS
Suited for Power Applications
Common mode EMI Inductors
Designed for higher frequency power conversion
For use in SMPS input filtering circuits
Mechanicals
CASE 1
1
Elect. Specs. @ 25°C— Operating Temp. -30° to +130° C
CASE 2 2
1.30
MAX
33,0
2
4
1
3
1
3
PIN 1
3
3
.600 ±.008
15,20 0,20
2
Part
Number
4
.720
MAX
18,29
.900 ±.008
22,86 0,20
PIN 1
1.70
MAX
43,18
2
.800 ±.008
20,30 0,20
4
1.000 ±.008
25,40 0,20
.158 /.197
4,01/ 5,00
2
1.34
MAX
34,04
LEVEL OF
ENCAPSULANT
4
.197 /.237
LEVEL OF
ENCAPSULANT 5,00/ 6,02
1.03
26,16
CASE 4 1
CASE 3 1
2
.615
MAX
15,60
1
2
.240 /.270
6,10/ 6,86
3
2
.500 ±.008
12,70 0,20
4
2
.158 /.197
4,00/ 5,00
4
LEVEL OF
ENCAPSULANT
.650
MAX
16,51
1.40
0.50
0.30
0.29
0.10
0.07
0.06
0.04
0.04
0.06
0.04
0.033
0.02
0.015
0.01
3
1
3
1
1
3
3
3
4
1
1
2
2
2
2
Leakage
Inductance
(MIN/MAX µH)
160/320
120/320
30/60
100/220
40/80
15/35
10/20
6/15
5/14
25/60
20/45
20/45
10/25
10/20
7/15
1
3
2
4
3
PIN 1
.750 ±.008
19,05 0,20
3
Case
Style
.500 ±.008
12,70 0,20
1.00 ±.008
25,40 0,20
PIN 1
DCR
(Ω MAX)
Schematic
4
4
1.07
MAX
27,18
1
Inductance
mH
(± 30%)
33
18
5.6
15
5.6
3.3
2.2
1.2
1.2
3.9
2.7
3.3
1.8
1.5
1.0
.910
MAX
23,10
1.10
MAX
28,00
3
.039
0,99
PE-96161
PE-96165
PE-96166
PE-96168
PE-96173
PE-96175
PE-96177
PE-96178
PE-96179
PE-96181
PE-96186
PE-96187
PE-96188
PE-96189
PE-96190
Rated RMS
Current
(A.Normal)
0.5
1.0
1.0
2.0
3.15
3.15
3.15
3.15
3.15
5.0
6.3
8.0
10.0
12.5
15.0
LEVEL OF
ENCAPSULANT
1.10
MAX
27,90
COIL
NOTES: 1. Leads have .031/.039 diameter.
.700/.900
2.Self-leaded: 96187 has .036 nom. diameter leads.
96188 & 96189 have .045 nom. diameter leads.
96190 has .051 nom. diameter leads.
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .010
0,25
For More Information :
UNITED STATES
(Worldwide)
UNITED KINGDOM
(Northern Europe)
FRANCE
(Southern Europe)
SINGAPORE
(Southern Asia)
TAIWAN, R.O.C.
(Northern Asia)
HONG KONG
(China/Hong Kong)
12220 World Trade Drive
San Diego, CA 92128
U.S.A.
http://www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
1 & 2 Huxley Road
The Surrey Research Park
Guildford, Surrey GU2 5RE
United Kingdom
TEL: 44 1483 401700
FAX: 44 1483 401701
Zone Industrielle
F-39270
Orgelet
France
TEL: 33 3 84 35 04 04
FAX: 33 3 84 25 46 41
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
TEL: 65 287 8998
FAX: 65 280 0080
3F-4, No. 81, Sec. 1
HsinTai Wu Road
Hsi-Chih, Taipei Hsien
Taiwan, R.O.C.
Tel: 886 2 2698 0228
FAX: 886 2 2698 0948
19/F, China United Plaza
1008 Tai Nan West Street
Cheung Sha Wan, Kowloon
Hong Kong, China
TEL: 852 2788 6588
FAX: 852 2776 1055
DISTRIBUTOR
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
Printed on recycled paper. Copyright ©2002, Pulse Engineering, Inc. All rights reserved.
G002.F (10/02)
18