BTE2000G.../PTE2000G... - Series Precision stainless steel pressure transmitters FEATURES · 0 ... 0.35 bar to 0 ... 35 bar gage or 0 ... 15 psig to 0 ... 500 psig · For corrosive media in harsh environments · 1 ... 6 V or 4 ... 20 mA output · Field interchangeable · All welded stainless steel diaphragm construction SERVICE Pressure inlet: any liquid, gas or vapor that is compatible with 303 stainless steel. Housing: 303 SS, protection class, IP67 according to DIN400501 Maximum ratings Supply voltage (reverse polarity protection) BTE2...G1... 12 ... 30 V BTE2...G4...2 12 ... 36 V Temperature limits Storage Operating Media Compensated Humidity limits Vibration (5 Hz to 500 Hz) Mechanical shock 1cm 1 inch ELECTRICAL CONNECTION SPECIFICATIONS Maximum load current BTE2...G1... only Scale: 1 - 6V output version 20 mA -55°C to 100°C -40°C to 100°C -40°C to 125°C 0°C to 70°C 4 - 20 mA output version 0 - 100 %RH 2g 50 g January 1998/098 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com BTE2000G.../PTE2000G... - Series Precision stainless steel pressure transmitters PERFORMANCE CHARACTERISTICS5 Device type Proof pressure3 Operating pressure BTEM2350G... BTE2001G... BTE2002G... BTE2005G... BTE2010G... BTE2020G... BTE2025G... BTE2035G PTE2005G... PTE2015G... PTE2030G... PTE2100G... PTE2300G... PTE2500G... Burst pressure4 1.4 bar 2 bar 4 bar 13 bar 31 bar 31 bar 50 bar 50 bar 20 psig 30 psig 60 psig 200 psig 450 psig 750 psig 350 mbar 1 bar 2 bar 5 bar 10 bar 20 bar 25 bar 35 bar 5 psig 15 psig 30 psig 100 psig 300 psig 500 psig 65 bar 340 bar 1000 psig 5000 psig PERFORMANCE CHARACTERISTICS5 1 - 6 V output version (unless otherwise noted, VS = 15 V, tamb = 25°C, RL > 100 kOhm) Characteristics Zero pressure offset Full scale span Full scale output Thermal effects6 Combined offset and span (0 to 70°C) BTEM.../ PTE2005G... BTE.../ PTE2015G... to PTE2300G... (-40°C to 0°C, 70°C to 100°C) Non-linearity and hysteresis (BSL)8 Repeatability Long term stability7 Output noise Frequency response Output impedance Power supply rejection Offset Span Power consumption (no load) Min. Typ. Max. Unit 0.90 4.95 1.00 5.00 6.0 1.10 5.05 V ±0.6 ±0.5 ±2.0 ±0.2 ±0.1 ±0.2 ±0.04 1 ±2.5 ±1.5 %FSO ±0.5 50 0.05 0.03 100 %FSO ms Ohm %FSO/V mW 4 - 20 mA output version (unless otherwise noted, VS = 15 V, t amb = 25°C, RL = 100 Ohm) Characteristics Zero pressure offset Full scale span Full scale output Combined offset and span Thermal effects6 (0 to 70°C)) BTEM.../ PTE2005G... BTE.../ PTE2015G... to PTE2300G... (-40°C to 0°C, 70°C to 100°C) Non-linearity and hysteresis (BSL)8 Repeatability Long term stability7 Output noise Frequency response (10% to 90%) Power supply rejection Offset Span Power consumption (IL = 20 mA) Min. Typ. Max. Unit 3.9 15.8 4.0 16.0 20.0 4.1 16.2 mA ±0.6 ±0.5 ±2.0 ±0.2 ±0.1 ±0.2 ±0.04 1 ±2.5 ±1.5 %FSO ±0.5 %FSO ms 0.05 0.03 %FSO/V 260 mW January 1998/098 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com BTE2000G.../PTE2000G... - Series Precision stainless steel pressure transmitters ELECTROMAGNETIC CAPABILITY 9 Test conditions Interference Radiated, radio frequency electromagnetic field immunity (RFI) IEC801-3: Grade 3 10V/m, 1MHz to 1000 MHz unmodulated and 80% modulated <1% FSO Electrical fast transient/burst immunity (EFT) IEC 801-4: Grade 3 ±2 kV <1% FSO Electrostatic discharge immunity (ESD) IEC 801-2: Grade 3 ±8 kV, contact discharge <1% FSO OUTPUT CHARACTERISTIC 1 - 6 V output version 4 - 20 mA output version LOAD LIMITATION RECOMMENDED CABLE/CONNECTOR ACCESSORY 4 - 20 mA output version for Connector version, Order number ZK000101, other cable length on special request. Included in delivery ! Pin Connection Pin Flying lead ends 1 2 3 4 brown green white + shield yellow January 1998/098 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com BTE2000G.../PTE2000G... - Series Precision stainless steel pressure transmitters OUTLINE DRAWING Connector version BTE2...A/PTE2...A Mass: typ. 190g Pin 1 2 3 4 OUTPUT 1-6V 4 - 20 mA +Vs +Vs Vout NC Case Case -Vs -Vs Cable version BTE2...C/PTE2...C Mass: typ. 190g OUTPUT Lead color 1-6V 4 - 20 mA blank brown white green yellow shield +Vs case Vout -Vs shield +Vs case NC -Vs Dimensions in mm January 1998/098 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com BTE2000G.../PTE2000G... - Series Precision stainless steel pressure transmitters OPTIONAL PIPE FITTING DRAWINGS Part No. SFIT62 SFIT64 SFIT68 Thread Male Male T1 T2 1/8 NPT 1/4 NPT 1/8 BSP 3/8 NPT 3/8 NPT 3/8 NPT W Hex in. mm. in. mm. Maximum working pressure (psig) 3/4 3/4 3/4 1.27 1.45 1.45 32.3 37.0 37.0 0.56/0.38 0.56 0.56 14.2/9.7 14.2 14.2 7200 7200 7200 R D Material: Stainless Steel 316 Specification Notes (for all devices) 1. 2. 3. 4. 5. 6. 7. 8. 9. IP67 protection is given with locked connector. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagrams. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. The package features a stainless steel diaphragm which is dead ended into a small through hole. The media will therefore be contained until this extreme burst pressure limit is exceeded. The package is an all-sealed housing. For proper function, the gage port is vented to the atmosphere through the connecting cable. Thus, the cable end must have access to the ambient pressure. Temperature tested and guaranteed from 0°C to 70°C relative to 25°C. All specifications shown are relative to 25°C. Change in output after one year or one million pressure cycles. Linearity refers to the Best Straight Line fit measured for offset pressure, full scale pressure and 1/2 full scale pressure. Test are in accordance with EN50082-2, Jan. 93. ORDERING INFORMATION Part number 1 - 6 V output 4 - 20 mA output Operating pressure Connector version Cable version Connector version Cable version 0 - 0.35 bar 0 - 1 bar 0 - 2 bar 0 - 5 bar 0 - 10 bar 0 - 20 bar 0 - 25 bar 0 - 35 bar 0 - 5 psig 0 - 15 psig 0 - 30 psig 0 - 100 psig 0 - 300 psig 0 - 500 psig BTEM2350G1A BTE2001G1A BTE2002G1A BTE2005G1A BTE2010G1A BTE2020G1A BTE2025G1A BTE2035G1A PTE2005G1A PTE2015G1A PTE2030G1A PTE2100G1A PTE2300G1A PTE2500G1A BTEM2350G1C BTE2001G1C BTE2002G1C BTE2005G1C BTE2010G1C BTE2020G1C BTE2025G1C BTE2035G1C PTE2005G1A PTE2015G1C PTE2030G1C PTE2100G1C PTE2300G1C PTE2500G1C BTEM2350G4A BTE2001G4A BTE2002G4A BTE2005G4A BTE2010G4A BTE2020G4A BTE2025G4A BTE2035G4A PTE2005G4A PTE2015G4A PTE2030G4A PTE2100G4A PTE2300G4A PTE2500G4A BTEM2350G4C BTE2001G4C BTE2002G4C BTE2005G4C BTE2010G4C BTE2020G4C BTE2025G4C BTE2035G4C PTE2005G4C PTE2015G4C PTE2030G4C PTE2100G4C PTE2300G4C PTE2500G4C Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. January 1998/098 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com