I F (AV) (A) Part Number IFSM (A) Tj (°C) 50Hz ( ) is with Half-cycle Sinewave Heatsink Single Shot IF / I FP (mA) Rth (j- ) Mass Fig. Rth (j-c) (g) No. (°C/W) –40 to +150 2.5 0.25 10 150 100 0.4 10/10 0.18 10/20 20 0.2 54 EU 1 15 –40 to +150 2.5 0.25 10 150 100 0.4 10/10 0.18 10/20 17 0.3 55 RU 1 0.25 15 –40 to +150 2.5 0.25 10 200 100 0.4 10/10 0.18 10/20 15 0.4 57 AU01 0.5 15 –40 to +150 1.7 0.5 10 150 100 0.4 10/10 0.18 10/20 22 0.13 AS01 0.6 20 –40 to +150 1.5 0.6 10 50 100 1.5 10/10 0.6 10/20 22 0.13 EH 1 0.6 30 –40 to +150 1.35 0.6 10 200 150 4 10/10 1.3 10/20 17 0.3 RF 1 0.6 15 –40 to +150 2.0 0.6 10 200 100 0.4 10/10 0.18 10/20 15 0.4 RH 1 0.6 35 –40 to +150 1.3 0.6 5 70 150 4 10/10 1.3 10/20 15 0.4 ES 1 0.7 30 –40 to +150 2.5 0.8 10 200 100 1.5 10/10 0.6 10/20 20 0.2 ES01 0.7 30 –40 to +150 2.5 0.8 10 200 100 1.5 10/10 0.6 10/20 20 0.2 AU02 0.8 25 –40 to +150 1.3 0.8 10 250 100 0.4 10/10 0.18 10/20 22 0.13 EU02 1.0 15 –40 to +150 1.4 1.0 10 300 100 0.4 10/10 0.18 10/20 20 0.2 EU 2 1.0 15 –40 to +150 1.4 1.0 10 300 100 0.4 10/10 0.18 10/20 17 0.3 RU 2M 1.1 20 –40 to +150 1.2 1.1 10 300 100 0.4 10/10 0.18 10/20 15 0.4 RU 3 1.5 20 –40 to +150 1.5 1.5 10 400 100 0.4 10/10 0.18 10/20 12 0.6 RU 3M 1.5 50 –40 to +150 1.1 1.5 10 350 100 0.4 10/10 0.18 10/20 RU 30 2.0 200 –40 to +150 0.95 2.0 10 300 100 0.4 RU 31 3.0 150 –40 to +150 1.2 3.0 50 500 100 RU 4 1.5 (3.0) 50 –40 to +150 1.5 3.0 10 300 100 0.4 RU 4M 2.0 (3.5) 70 –40 to +150 1.3 3.5 10 300 100 0.4 100/100 0.18 100/200 5.0 54 55 12 0.6 100/100 0.18 100/200 10 1.0 100/100 0.18 100/200 10 1.0 0.18 8 1.2 8 1.2 10/10 10/20 59 30 –40 to +150 1.5 2.5 50 500 100 0.4 100/100 0.18 100/200 4.0 2.1 40 –40 to +150 1.5 5.0 50 500 100 0.4 100/100 0.18 100/200 4.0 2.1 FMU-34S, R 20 80 –40 to +150 1.5 10 50 500 100 0.4 100/100 0.18 100/200 2.0 5.5 60 61 Flammability: UL94V-0 or Equivalent (Unit: mm) 0.78±0.05 Cathode Mark Cathode Mark 2.7±0.2 4.0±0.2 16.9 20.0 4.0 8.4 6.5±0.2 2.54 0.45 2.54 S type 3.3 2.6 20.0 ±0.5 1.35 1.35 0.85 5.0 15.0 9.0 C0.5 3.9 8.0±0.2 2.2 0.8 Cathode Mark 50.0±0.1 4.2 2.8 3.3 4.0±0.2 0.8 2.8 5.0 10.0 1.4±0.1 Cathode Mark Cathode Mark R type 16.5 ±0.5 3.5 2.7±0.2 Cathode Mark 7.2±0.2 Cathode Mark 0.98±0.05 62.5±0.7 0.78±0.05 7.2±0.2 0.6±0.05 62.5±0.7 0.57±0.02 9.1±0.2 57 58 10 5.2±0.2 55 54 FMU-24S, R 2.4±0.1 55 56 62.3±0.7 2.9±0.1 50.0±1.0 VR = VRM VR = VRM max max IF / I FP (mA) 2 (µs) 15 1.2±0.05 62.5±0.7 Ta (°C) t rr 1 (µs) : I F / I R (=I F) 90% Recovery Point (ex. I F / I R =100mA/100mA 90% Recovery Point) : I F / I R (=2 I F) 75% Recovery Point (ex. I F / I R =100mA/200mA 75% Recovery Point) 0.25 ■ External Dimensions 20 t rr 2 0.25 FMU-14S, R Center-tap IF (A) IR (H) (µA) (13.5) 400 VF (V) max 1 t rr EU01 5.0±0.2 Axial IR (µA) Tstg (°C) 5.0±0.2 Package 62.3±0.7 VRM (V) t rr Page where characteristic curve is shown Fast-Recovery Rectifier Diodes 400V 2.3 3.4 1.0 5.45 S type 5.45 R type +0.2 0.65 –0.1 2.6 Characteristic Curves Fast-Recovery Rectifier Diodes RU 3 series 10 P. C. B. Solder 180 • 100 • 1.6 t 10mm Copper Foil 1.0 RU3B RU3,RU3A,RU3C, 0.5 0 0 25 50 75 100 125 150 IFSM (A) I FSM (A) 25 20ms 20 1 Peak Forward Surge Current L =10 mm Forward Current I F (A) IF(AV) (A) Average Forward Current L =10 mm 1.5 I FMS Rating VF —IF Characteristics (Typical) Ta —IF (AV) Derating 2.0 0.1 Ta = 100°C 50°C 25°C 0.01 0.001 0.2 0.4 0.6 0.8 1.0 1.2 15 10 5 0 1.4 1 Forward Voltage VF (V) Ambient Temperature Ta (°C) 5 10 50 Overcurrent Cycles RU 3YX 10mm Copper Foil 1.0 0.5 0 0 25 50 75 100 125 150 IFSM (A) I FSM (A) 20ms 40 1 Peak Forward Surge Current P.C.B Solder 180 • 100 • 1.6 t 50 10 L =10mm Forward Current I F (A) IF(AV) (A) Average Forward Current L =10mm 1.5 I FMS Rating VF —IF Characteristics (Typical) Ta —IF (AV) Derating 2.0 0.1 Ta = 150°C 100°C 50°C 25°C 0.01 0.001 0.1 0.3 0.5 0.7 30 20 10 0 0.9 1 Forward Voltage VF (V) Ambient Temperature Ta (°C) 5 10 50 Overcurrent Cycles RU 3M series 10mm Copper Foil 0.1 0.5 0 0 25 50 75 100 125 150 1 0.1 Ta = 150°C 100°C 60°C 25°C 0.01 0.001 0.1 0.3 0.5 0.7 0.9 IFSM (A) I FSM (A) Peak Forward Surge Current P.C.B Solder 180 • 100 • 1.6 t 50 20 10 L =10mm Forward Current I F (A) IF(AV) (A) Average Forward Current L =10mm 1.5 I FMS Rating VF —IF Characteristics (Typical) Ta —IF (AV) Derating 2.0 20ms 40 30 20 10 0 1.1 1 Forward Voltage VF (V) Ambient Temperature Ta (°C) 5 10 50 Overcurrent Cycles RU 30 series IFSM (A) I FSM (A) 10 2.5 RU 30 RU 30A th He 2.0 5mm ats W ith ink ou tH 1.5 RU 30Y RU 30Z ea tsi nk 1.0 1 0.1 Ta = 150°C 100°C 60°C 25°C 0.01 0.5 0 25 50 60 75 100 125 150 20ms 160 Peak Forward Surge Current 5mm Forward Current I F (A) IF(AV) (A) 200 180 3.0 0 I FMS Rating 50 20 •20 • 1t Cu Wi Average Forward Current VF —IF Characteristics (Typical) Ta —IF (AV) Derating 3.5 0.001 0.1 0.3 0.5 0.7 0.9 1.0 140 RU 30 RU 30A 120 100 80 RU 30Y RU 30Z 60 40 20 0 1.2 1 Forward Voltage VF (V) Ambient Temperature Ta (°C) 5 10 50 Overcurrent Cycles RU 31, 31A 2 t /T=1/6 1.5 DC t /T=1/ 3, Sinewave 1 0.5 I FSM (A) t /T=1/6 t 4 150 20ms 120 T 3 t /T=1/ 3, Sinewave 2 t /T=1/2 1 DC 0 90 110 130 Lead Temperature T (°C) I FMS Rating 150 Tj =150°C Peak Forward Surge Current T 0 70 58 t /T=1/2 t Forward Power Loss PF (W) IF(AV) (A) Average Forward Current 2.5 I F(AV) —PF Characteristics 5 Tj =150°C IFSM (A) T —I F(AV) Derating 3 0 0.5 1 1.5 2 Average Forward Current 2.5 IF(AV) (A) 3 90 60 30 0 1 5 10 Overcurrent Cycles 50