30KP33 8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503 thru 30KP220A DESCRIPTION This data sheet defines a series of 30 kW Transient Voltage Suppressor (TVS) series designed for use in applications where large voltage transients can damage sensitive components. This series is available from 33 to 220 volts with a selection of either 5% or 10% tolerance of the Breakdown Voltage (VBR). The 30 kW TVS series provides a peak pulse rating of 30,000 watts for one millisecond and is designed for use in applications where induced lighting presents a hazard to electronic circuitry. FEATURES • • • 30,000 Watts Peak Power dissipation at 25° C for 10/1000 micro second pulse Available in voltage range from 33 to 220 Volts UL 94V-0 Flammability classification MAXIMUM RATINGS • • • • • • 30,000 W @10/1000 µs of peak power dissipation at 25° C 0 0 Operating Temperatures: -55 C to +150 C 0 0 Storage Temperature: -55 C to +150 C Forward surge rating: 250 Amps, 1/120 second (one half sine wave) at 25° C Steady state power dissipation: 7.0 watts @ TA = 25°C Pulse Repetition Rate: <.05% MECHANICAL • • • • Void free molded case Weight 1.5 grams (approximate) Body Marked with logo, device marking code Positive terminal cathode marked with band or dot. Bidirectional not marked for polarity FIGURE 1 PEAK PULSE POWER vs PULSE TIME ISO 9001 CERTIFIED FIGURE 2 PULSE WAVE FORM REV D 11/02/99 30KP33 thru 30KP220A ELECTRICAL Characteristics @ 250C Unless otherwise specified V(BR) IT Maximum Clamping @ IPP 10/1000 µs VC ID IPP VOLTS VOLTS mA VOLTS µAmps Amps mV/°C 30KP33 33 36.7-44.9 50 64.6 5000 496 42 30KP33A 33 36.7-40.6 50 58.6 5000 548 38 30KP36 36 40.0-48.9 50 68.2 5000 454 46 Part Number Breakdown Voltage V(BR) Volts @ Rated Stand-off Voltage VWM Maximum Reverse Leakage @ VWM Maximum Peak Pulse Current Maximum V(BR) Temperature Coefficient α VZ 30KP36A 36 40.0-44.2 50 61.8 5000 502 41 30KP40 40 44.4-54.3 20 75.8 1500 412 51 30KP40A 40 44.4-49.1 20 68.6 1500 456 46 30KP43 43 47.8-58.4 10 79.0 500 380 55 30KP43A 43 47.8-52.8 10 71.0 500 430 50 30KP45 45 50.0-61.1 5 80.7 150 372 57 30KP45A 45 50.0-55.3 5 73.0 150 410 52 30KP48 48 53.3-65.1 5 85.9 150 350 62 30KP48A 48 53.3-58.9 5 77.7 150 386 56 30KP51 51 56.7-69.3 5 91.5 50 328 66 30KP51A 51 56.7-62.7 5 82.8 50 362 60 30KP54 54 60.0-73.3 5 96.8 25 310 70 30KP54A 54 60.0-66.3 5 87.5 25 342 63 30KP58 58 64.4-78.7 5 104 15 288 76 30KP58A 58 64.4-71.2 5 94.0 15 320 68 30KP60 60 66.7-81.5 5 107 15 280 78 30KP60A 60 66.7-73.7 5 97.3 15 304 71 30KP64 64 71.1-86.9 5 115 10 260 84 30KP64A 64 71.1-78.6 5 104 10 288 76 30KP70 70 77.8-95.1 5 126 10 238 92 30KP70A 70 77.8-86.0 5 114 10 264 83 30KP75 75 83.3-102.0 5 135 10 222 100 30KP75A 75 83.3-92.1 5 122 10 246 89 30KP78 78 86.7-106.0 5 140 10 214 104 30KP78A 78 86.7-95.8 5 126 10 238 93 30KP85 85 94.4-115 5 152 10 198 113 30KP85A 85 94.4-104 5 137 10 218 102 30KP90 90 100-122 5 160 10 188 120 30KP90A 90 100-111 5 146 10 206 109 30KP100 100 111-136 5 179 10 168 134 30KP100A 100 111-123 5 162 10 186 121 30KP110 110 122-149 5 196 10 154 147 30KP110A 110 122-135 5 178 10 168 133 30KP120 120 133-163 5 214 10 140 161 30KP120A 120 133-147 5 193 10 156 145 30KP130 130 144-176 5 231 10 130 174 30KP130A 130 144-159 5 209 10 142 157 30KP150 150 167-204 5 268 10 112 202 30KP150A 150 167-185 5 243 10 124 183 30KP160 160 178-218 5 287 10 104 216 30KP160A 160 178-197 5 259 10 116 195 30KP170 170 189-231 5 304 10 98 229 30KP170A 170 189-209 5 275 10 110 207 30KP180 180 200-244 5 321 10 94 242 30KP180A 180 200-221 5 291 10 104 219 30KP200 200 222-271 5 356 10 84 269 30KP200A 200 222-245 5 322 10 94 243 30KP220 220 245-299 5 393 10 76 297 30KP220A 220 245-271 5 356 10 84 269 Note 1: Transient Voltage Suppressors are normally selected according to the reverse “Stand Off Voltage” VWM which should be equal to or greater than the dc continuous peak operating voltage level. Note 2: For bidirectional construction, indicate a C or CA suffix after the part number. ISO 9001 CERTIFIED REV D 11/02/99