Model 33 Medium Pressure PC Board Mountable Pressure Sensor 0-100 mV Output Differential Pressure Temperature Compensated Medical Instrumentation HVAC Process Control Vacuum Measurement Air Flow Management DESCRIPTION The Model 33 is a temperature compensated, piezoresistive silicon pressure sensor packaged in TO-8 configurations. It provides excellent performance and long-term stability. Differential pressure ranges from 0-2 PSI to 0-250 PSI are available. Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier. This provides sensitivity interchangeability of ±1%. Please refer to the low pressure section for information on products with operating pressures less than 0-2 PSI. An uncompensated sensor (Model 30) is also available. For sensors in a dual-in-line package please refer to the Models 1210 and FEATURES 1220. Please contact the factory for additional information. TO-8 Package ±0.1% Non-linearity ±0.5% Temperature Performance 1.0% Interchangeable Span (provided by gain set resistor) Solid State Reliability Low Power DIMENSIONS STANDARD RANGES 1-34 Range psid 0 to 2 ● 0 to 5 ● 0 to 10 ● 0 to 15 ● 0 to 30 ● 0 to 50 ● 0 to 100 ● 0 to 250 ● TO-8 – Standard Model 33 Medium Pressure PC Board Mountable Pressure Sensor PERFORMANCE SPECIFICATIONS Supply Current: 1.5mA Ambient Temperature: 25°C (Unless otherwise specified) PARAMETERS MIN TYP MAX UNITS Full Scale Output Span 75 100 150 mV Full Scale Output Span (2 psi version) 30 Zero Pressure Output 60 mV 2 ±mV Pressure Non-linearity 0.05 0.10 ±% Span Pressure Hysteresis 0.01 0.05 ±% Span NOTES 1 4400 6000 Ω Temperature Error – Span 0.3 0.5 ±% Span 2 Temperature Error – Zero 0.1 0.5 ±% Span 1, 2 Thermal Hysteresis – Span 0.1 ±% Span 2 Thermal Hysteresis – Zero 0.1 ±% Span 2 Supply Current 1.5 mA 3 Input & Output Resistance 2500 2.0 Response Time 1.0 msec 4 Output Noise 1.0 µV p-p 5 Output Load Resistance Insulation Resistance (50 VDC) 2 MΩ 50 MΩ 6 Rated 7, 9 Pressure Overload 3X Operating Temperature –40°C to +125°C Storage Temperature –50°C to +150°C Acceleration 50g Max Shock 1000g Peak for 0.5 mS Vibration 20g Peak at 10 to 2000 Hz Media Non-Corrosive Gases Weight 3 Grams Notes 1. Best Fit Straight Line. For 2 psi output span is 30-60 mV and TC zero temperature error is ±1.25%. 2. Temperature range 0-50°C in reference to 25°C. 3. Guarantees input/output ratiometricity. 4. For a zero-to-full scale pressure step change. 5. 10 Hz to 1kHz. 8 6. 7. 8. 9. CONNECTIONS Between case and sensing element. For top side application, 3X not to exceed 500 psi on ranges: 0-10 psi to 0-250 psi, 20 psi for 2 psi and 5 psi versions. For top entry versions, wetted materials are silicon, aluminum, gold, RTV, glass, and nickel. For bottom entry versions, wetted materials are silicon, RTV, gold, and glass. For backside application, 3X not to exceed 100 psi on all ranges. APPLICATION SCHEMATIC ORDERING INFORMATION 33A - 015 D Type (D = Differential) Pressure Range Model June 2001 TO-8 – Standard Feel free to contact customer service with any questions at Toll free 1(800)745-8008; Phone (757)766-1500; Fax (757)766-4297 1-35