ETC 528-501-76

New Product Information
Professional LED Indicator
3
29
Ø 13mm Mounting
•
Robust stainless steel housing for operation
in harsh environments
•
Flying Lead Options available
•
Low Profile Styling
•
Ingress Protection to IP67
•
Sunlight Visible
•
Ideal for Medical and Catering Applications
+0.1
0
6
Ø 17.0
2.8
Ø13.0
+ on rear of header
denotes anode
Dimensions in mm (typical)
Not to Scale
528 Series
Operating Temperature Range: -40 to +60 oC
Mean Time Between Failure 100,000 Hours
Storage Temperature Range: -50 to +100 oC
Order Code :
528 – 501 – 22
Series
Options :
LED Options :
Code – LED Colour / Intensity @ 20 mA
Voltage Options :
Code – Voltage / Current
528
501 – Red 660nm
521 – Yellow 590nm
532 – Green 525nm
930 – Blue 470nm
997 – White*
21 – 12 Vdc @ 20mA
22 – 24 Vdc @ 20mA
23 – 28 Vdc @ 17mA
24 – 48 Vdc @ 10mA
75 – 110 Vac @ 7mA
76 – 230 Vac @ 3mA
2750 mcd
4800 mcd
6000 mcd
2000 mcd
4000 mcd
Intensity figures are typical and apply to discrete LED
(non flat-topped)
Package power dissipation (max) 825mW
Materials :
Technical Information :
Lock Washer: Stainless Steel
Encapsulation: Alumina Filled Epoxy
Termination: Silver Plated Brass
Body / Nut: Stainless Steel 316
Termination Insulator: Nylon 6
Panel Washer: Viton
Lens: Shatterproof Polycarbonate
Min. Clearance Behind Panel: 60mm
Mounting Hole: Ø13.0mm
Min. Mounting Centres: 26mm
Min/Max Panel Thickness: 2mm/10mm
Mounting Torque: 1.0Nm
Max. Reverse Voltage: 1000 Vdc
* Typical emission colour:
x=0.31, y=0.32
Colour temperature 8000K
Intensities (Iv) and colour
shades of white (x,y coordinates) may vary between LEDs within a batch
Marl International Limited Ulverston, Cumbria. LA12 7RY England
Tel : + 44 (0) 1229 582430 Fax : + 44 (0) 1229 585155
E-mail : [email protected] Website : www.marl.co.uk
The company’s services are recognised to the Internationally recognised quality standard BS EN ISO9001 : 1994
The information above does not contstitute part of any order or contract and should not be regarded as a representation relating to either products or service. No responsibility can be assumed
for inaccuracies or printing errors. Marl International Ltd. reserve the right to alter without notice the specification or any condition of supply for products or service.
© MARL INTERNATIONAL LIMITED 1999
DS 34/99 ISSUE 2