ETC 82562EP

82562 Family Platform LAN Connect
Fast Ethernet Controllers
Product Brief
Product Description
The Intel® 82562 family of controllers are highly integrated Platform LAN Connect (PLC)
devices combining 10BASE-T and 100BASE-TX physical layer capabilities and providing a core
ingredient of the enabling solution for the integrated networking connectivity in Intel® I/O
Controller Hub (ICH2/3/4) based platforms. Both support a single interface fully compliant with
the IEEE 802.3/802.3u standard. The IEEE 802.3u standard for 100BASE-TX defines
networking over two pairs of Category 5 unshielded twisted pair cable. The 82562ET and
82562EM comply with the IEEE 802.3u Auto-Negotiation (and 100BASE-TX) standard and the
IEEE 802.3x Full Duplex Flow Control standard.
The combination 82562 device with ICH2/3/4 LAN solution enables a 32-bit PCI device that
features enhanced scatter-gather bus mastering capabilities allowing high-speed data transfers
over the PCI bus. In additoin, these bus mastering capabilities enable the LAN solution to process
high-level commands and perform multiple operations, thereby offloading communications tasks
from the system CPU. Two large transmit and receive FIFOs are also included in the architecture
to enhance performance while minimizing the use of system resources.
Target applications include but are not limited to LAN on Motherboard (LOM) and
Communications and Networking Riser (CNR) form factors targeted at the value segment. These
designs could include embedded and PC target applications requiring reliable 10/100 Mbps LAN
capabilities. The 82562 family enables additional enterprise management capabilities beyond this
baseline. When combined, the 82562, the 82562 software, and the embedded LAN capability in
the ICH2/3/4 make up Intel’s newest high quality 10/100 Mbps network solution, the
Intel® PRO/100 VE/VM Network Connection.
Digital
Equalizer
Adaptation
LILED
Port LED
Drivers
ACTLED
SPEEDLE
MDI/MDI-X
RDN/RDP
TDN/ TDP
Equalizer &
BLW correction
Digital Clock
Recovery
(100)
100Base-TX
PCS
CRS/Link 10
Detection
Digital Clock
Recovery (10)
10Base-T
PCS
RSTSYNC
3
LAN
Connect
Interface
Transmit DAC
10/100
3
JTXD[2:0]
JRXD[2:0]
JCLK
AutoNegotiation
Bias & BandGap Voltage
Circuit
Clock Generator
X1
Crystal
25 MHz
Control
Registers
X2
January 2002
82562 Family Product Brief
Hardware Product Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.3 10BASE-T/100BASE-TX compliant physical layer interface
IEEE 802.3u Auto-Negotiation support
Digital Adaptive Equalization control
Link status interrupt capability
XOR Tree mode support for board testing
3-port LED support (speed, link and activity)
10BASE-T auto-polarity correction
Diagnostic loopback mode
1:1 transmit transformer ratio support
Low power (less than 300 mW in active transmit mode)
Reduced power in “unplugged mode” (less than 50 mW)
Automatic detection of “unplugged mode”
3.3 V device
Platform LAN connect interface support
Software Product Features
•
•
•
•
•
Intel® SingleDriver™ technology (10/100 Mbps support)
Certified and validated support for most common operating systems
Instrumentation support for CIM/WBEM, SNMP, DMI, PXE 2.0
Intel® PROSet Utility support for installation and configuration
Alert on LAN* Software Developer Kit (SDK) and sample code (82562EM only)
Applications
The 82562 device family is designed for use in the following applications.
•
•
•
•
LAN on Motherboard (LOM) implementation
Card and Network Riser (CNR) based Network Interface Card (NIC) adapters
Embedded applications
Networking systems
Page 2 of 4
January 2002
82562 Family Product Brief
Characteristics
Electrical
Power Supply
3.3 V ± 5%
Power Dissipation
300 mW (typcial)
Environmental
Operating temperature
0 C to 85 C (maximum)
Storage temperature
-65 C to 140 C
Physical
See Package Type in
Feature Matrix
Package
Feature Matrix
The 82562 device family consists of six different versions: ET, EM, EP, EX, and EZ.
Features
ET
EM
EP
EX
EZ
Comments
X
X
Enables single board design to accommodate Gigabit
or 10/100 Mbps LAN solution
®
Footprint compatible with the Intel 82540
Gigabit Ethernet controller
Alert on LAN 1.0 support
X
X
X
Enables remote manageability support
3.3 V device
X
X
X
X
X
3-port LED support (speed, link, and
activity)
X
X
X
X
X
WfM Baseline and NetPC Specification
compliant
X
X
X
X
X
ACPI support
X
X
X
X
X
Magic Packet filtering for Wake on LAN
support
X
X
X
X
X
ARP and flexible frame support
X
X
X
X
X
X
X
X
X
X
Low power (less than 300 mW in active
transmit mode)
X
X
X
X
X
Platform LAN connect interface support
X
X
X
X
X
Low power 3.3 V device
X
X
X
X
X
X
X
X
X
Automatic detectin of “unplugged mode”
Allows additional power down beyond ACPI for
reduced power consumption
Minimizes power consumption
Package type:
• 48-pin SSOP
• 64-pin PBGA
• 196-pin PBGA
January 2002
X
Page 3 of 4
82562 Family Product Brief
Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel® products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not
intended for use in medical, life saving, or life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copyright © 2002, Intel Corporation. All rights reserved.
* Third-party brands and names are the property of their respective owners.
Page 4 of 4
January 2002