SAW Components Data Sheet B3636 SAW Components B3636 Low-Loss Filter 1003,0 MHz Data Sheet Ceramic package DCC6 Features ● Low-loss filter for Fixed Radio Access ● Ceramic SMD package ● No matching network required for operation at 50 Ω Terminals ● Gold plated Dimensions in mm, approx. weight 0,1 g Pin configuration 2 5 1 4 3, 6 Input Output Input ground Output ground Case ground Type Ordering code B3636 B39102-B3636-Z610 Marking and Package according to C61157-A7-A41 Packing according to F61074-V8030-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Input power max. 988 ... 1018 MHz TA Tstg VDC PIN – 40/+ 85 – 40/+ 85 10 ˚C ˚C V Source and load impedance 50Ω 10 dBm Peak power of GSM signal, duty cycle 1:8 10 ... 3000 MHz 0 dBm 2 continous wave Apr 04, 2001 SAW Components B3636 Low-Loss Filter 1003,0 MHz Data Sheet Characteristics TA = -40 ... +85 ˚C ZS = 50 Ω ZL = 50 Ω Operating temperature range: Terminating source impedance: Terminating load impedance: min. typ. max. — Nominal frequency fN — 1003,0 Minimum insertion attenuation αmin — 3,6 5,0 MHz dB Passband width αrel ≤ 3,0 dB B3,0dB — 45,5 Amplitude ripple (p-p) fN ± 15 MHz ∆α — 1,3 30 20 14 13 15 35 33 20 18 20 — — — — — dB dB dB dB dB 35 10 42 21 — — dB dB — 2,0 — – 70 Relative attenuation (relative to αmin) 10 MHz ... 942 MHz 942 MHz ... 964 MHz 964 MHz ... 967 MHz 1039 MHz ... 1040 MHz 1040 MHz ... 1084 MHz αrel Absolute attenuation 1084 MHz ... 1559 MHz 1559 MHz ... 3000 MHz αabs VSWR fN ± 15 MHz TCf Temperature coefficient of frequency 3 Apr 04, 2001 — 2,7 MHz dB 2,5 — ppm/K SAW Components B3636 Low-Loss Filter 1003,0 MHz Data Sheet Transfer function Transfer function (pass band) 4 Apr 04, 2001 SAW Components B3636 Low-Loss Filter 1003,0 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC IS P.O. Box 80 17 09, D-81617 München EPCOS AG 1999. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, prices and delivery please contact the sales offices of EPCOS AG or the international representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. 5 Apr 04, 2001