HOME PHONE NETWORKING BANDPASS AND 10BASE-T FILTER MODULE For use with AMD’s 79C978 Phoneline/Ethernet LAN Controller Supports HomePNA™ 1M8 Technology Includes protection circuitry, isolation and EMI filtering Contains 10BASE-T transmit/receive isolation and EMI filtering Electrical Specifications @ 25°C — Operating Temperature 0°C to 70°C PARAMETER TEST CONDITION Input (7-8), Output (9-10) HP-8751A S21 100 W HPN 1M8 Insertion Loss 6.0 MHz to 9.0 MHz HPN 1M8 Attenuation 1.0 MHz 27 MHz HPN 1M8 Return Loss (6.0 MHz to 9.0 MHz) 10BASE-T Turns Ratio 10BASE-T Inductance 10BASE-T Leakage Inductance 10BASE-T Interwinding Capacitance Input (7-8), Output (9-10) HP-8751A S21 100 W MIN. NOM. MAX. UNITS 1.2 1.7 2.2 dB 70 55 80 60 — — dB dB Input (14-13), 100 W (1-2) 12 15 — HP-8751A S11 100 W Transmit (4-5):(13-12) 1.38 1.41 1.44 Receive (1-2):(16-15) 0.98 1.0 1.02 Transmit (4-5) 10 KHz, 0.02 Vrms 140 180 — Receive (1-2) 10 KHz, 0.02 Vrms 140 180 — (1-2) with (16-15) shorted — 0.4 0.7 (4-5) with (13-12) shorted — 0.7 1.0 (1-2) short to (16-15) shorted — 10 12 (4-5) short to (13-12) shorted — 10 12 (1-2) = (3-5) — 0.20 0.30 10BASE-T (4-5) — 0.15 0.20 DC Resistance (16-15) = (13-12) — 0.60 0.80 10BASE-T (13-12) to (4-5) 50 W 18 23 — Return Loss (16-15) to (1-2) 100 W 18 23 — Isolation Pins (1-8) shorted to (9-16) shorted 2000 — — NOTE: Filters are shipped in tubes unless tape and reel is specified. Please add the suffix “T” (i.e. B6006T) for tape and reel orders. .100 TYP 2,54 .580 14,73 .700 17,78 .120 TYP 3,05 .730 18,54 B6006 Date Code Country of Origin U.S. Pat. 5,015,981 .018 TYP 0,46 .950 MAX 24,13 W W W dB dB Vrms MEDIA 1:1 .100 TYP 2,54 RX- 1 16 RX- RX+ 2 15 RX+ XMIT CT 3 TX- 4 TX+ 5 GND 6 14 NC 1:1.41 13 TX- .700 17,78 SUGGESTED PAD LAYOUT .004/0,10 16 Surfaces Weight . . . . . . . . . . . . . .6.0 grams Tape & Reel . . . . . . . . . . . .200/reel Tube . . . . . . . . . . . . . . . . . .20/tube CHIP .050 TYP 1,27 .760 .580 19,30 14,73 .010 TYP 0,25 .125 TYP 3,18 — — µH µH µH µH pF pF Schematic Mechanical B6006 dB .290 7,37 (+) 11 NC 1:1 7 0°– 8° Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 12 TX+ Band Pass Filter 10 RING (-) Z (-) 8 9 TIP (+) For More Information : UNITED STATES (Worldwide) UNITED KINGDOM (Northern Europe) FRANCE (Southern Europe) SINGAPORE (Southern Asia) TAIWAN, R.O.C. (Northern Asia) 12220 World Trade Drive San Diego, CA 92128 U.S.A. http://www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 1 & 2 Huxley Road The Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 TEL: 65 287 8998 FAX:65 280 0080 3F-4, No. 81, Sec. 1 HsinTai Wu Road Hsi-Chih, Taipei Hsien Taiwan, R.O.C. Tel: 886 2 2698 0228 FAX: 886 2 2698 0948 DISTRIBUTOR Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Printed on recycled paper. ©2000, Pulse Engineering, Inc. PRELIMINARY B919.P (4/00)