Bussmann® Class G Fuseblocks BG Series and G Series For Bussmann SC Fuses 600 Volt AC, 0 - 20 Amp 480 Volt AC, 25 - 60 Amp All other dimensions (±0.015) Dimensional Data 1 to 30A 1.53" 0.36" 1.22" 0.425" 0.425" .360" .200" ±.003 3" (±0.031) 1.5" 0.86" Catalog Symbol: BG Series and G Series Class G Fuseblocks Ampere Rating: 0-20 Amperes, 600VAC OR LESS 25-60 Amperes, 480 VAC OR LESS Withstand Rating: 100,000 Amps RMS Sym. Agency Approvals: 1-30A: U.L. Recognized, U.L. 512, Guide IZLT2, File E14853 35-60A: U.L. Listed, U.L. 512, Guide IZLT, File E14853 CSA Certified, C22.2 No. 39, Class 6225-01; File 47235 For use with Class G Fuses (Bussmann SC) Temperature Rating (RTI): BG Series: 130°C G Series: 150°C Material: (1-30) Thermoplastic (35-60) Phenolic 2.38" .765" 1.63" Figure 1. Figure 2. .169 ≈ .210 TYP. 2" Figure 3. 35 to 60A 1.38" 0.22" 0.5" 0.47" 0.84" 0.29" DIAMETER 0.38" C'BORE 4.25" 2.125" Poles Catalog Data Amps 1 1 to 2 15 3 1 20 2 3 25 1 to 2 30 3 35 1 to 2 60 3 Terminal Type Screw with Quick-Connect* BG3011SQ BG3012SQ BG3013SQ BG3021SQ BG3022SQ BG3023SQ BG3031S BG3032S BG3033S — — — Pressure Plate w/Quick Connect* BG3011PQ BG3012PQ BG3013PQ BG3021PQ BG3022PQ BG3023PQ BG3031P BG3032P BG3033P — — — Box Box Lug Fig. Lug w/Clip No. BG3011B — 1 BG3012B — 2 BG3013B — 3 BG3021B — 1 BG3022B — 2 BG3023B — 3 BG3031B — 1 BG3032B — 2 BG3033B — 3 — G30060-1CR 4 — G30060-2CR 5 G30060-3C G30060-3CR 6 0.94" 1.78" Figure 4. 1.41" Figure 5. 1.69" 0.53" 0.22" DIAMETER HOLE 3.56" 1.78" * QUICK CONNECT ONLY RATED FOR 20A. 2.75" CE logo denotes compliance with European Union Low Voltage Directive (50-1000 Vac, 75-1500 Vdc). Refer to BIF document #8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. Figure 6. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 1-18-00 N99230 Rev. A Form No. BG Series Page 1 of 1 BIF Doc #1106