ETC D66L6B

D66 & DP66 Series
32 Pin DIP
6-Pole Filters
1.0 Hz to 100 kHz
Fixed Frequency
Description
The D66 and DP66 Series of small 6-pole fixedfrequency, precision active filters provide high
performance linear active filtering in a compact 32pin DIP package, with a broad range of corner
frequencies and a choice of transfer functions.
Individual D66 filters can serve in low-pass or highpass applications (DP66, low-pass only) or be
combined to create custom band-pass or bandreject filters. These fully self-contained units
require no external components or adjustments.
Each model comes factory tuned to a user-specified
corner frequency between 1 Hz and 100 kHz (DP66,
1 Hz to 5 kHz) and operate with low total harmonic
distortion over a wide dynamic input voltage range
from non-critical +/-5V to +/-18V power supplies.
Features/Benefits:
• Low harmonic distortion and wide signal-to-noise
ratio to 16 bit resolution.
• Compact 1.8"L x 0.8"W x 0.3"H minimizes board
space requirements.
• Plug-in ready-to-use, reducing engineering design
and manufacturing cycle time.
• Factory tuned, no external clocks or adjustments
needed
• Broad range of transfer characteristics and corner
frequencies to meet a wide range of applications.
U.S. Selling Price (1-9)
Orders for Export
Minimum Order Value $150.00
Lead-Time: 2-4 weeks A.R.O.
Available
D66L6B
DP66L6B
D66L6L
DP66L6L
D66 . . . . . . . . .$200.00 ea.
DP66 . . . . . . . .$210.00 ea.
U.S. Selling Price + 20%
F.O.B. Haverhill, MA
Accept Visa, Mcard, Amex
Low-Pass Models: ......................Page
6-pole Butterworth ....................................2
6-pole Butterworth (Low Power) ..............2
6-pole Bessel ............................................2
6-pole Bessel (Low Power) ......................2
Applications
Available High-Pass Models: ..................................
D66H8B 6-pole Butterworth ....................................2
• Anti-alias filtering
• Data acquisition systems
General Specifications: ........................................
Pin-out/package data & ordering information ..........3
• Communication systems and electronics
• Medical electronics equipment and research
• Aerospace, navigation and sonar applications
• Sound and vibration testing
• Acoustic and vibration analysis and control
• Noise elimination
• Signal reconstruction
1
25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839
e-mail: [email protected] • Web Address: http://www.freqdev.com
D66 & DP66 Series
6-Pole
Low-Pass and High-Pass Filters
Fixed Frequency
Model
D66L6B & DP66L6B
D66L6L & DP66L6L
Model
Product Specifications
Low-Pass
Low-Pass
Transfer Function
6-Pole, Butterworth
6-Pole, Bessel
Transfer Function
6-Pole, Butterworth
Size
1.8” x 0.8” x 0.3”
1.8” x 0.8” x 0.3”
Size
1.8” x 0.8” x 0.3”
Range fc
D66
DP66
1 Hz to 100 kHz
1 Hz to 5 kHz
1 Hz to 100 kHz
1 Hz to 5 kHz
Range fc
D66
DP66
1 Hz to 100 kHz
Not Available
Theoretical Transfer
Characteristics
Appendix A
Page 8
Appendix A
Page 3
Theoretical Transfer
Characteristics
Appendix A
Page 28
Passband Ripple
0.0 dB
0.0 dB
Passband Ripple
0.0 dB
High-pass
(theoretical)
DC Voltage Gain
(non-inverting)
Stopband
Attenuation Rate
(theoretical)
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
DC Voltage Gain
36 dB/octave
36 dB/octave
Stopband
Attenuation Rate
36 dB min.
Power Bandwidth
(-6dB) 1 MHz
Power Bandwidth
120 kHz
± 1% max.
Cutoff Frequency
Stability
Amplitude
Phase
fc
± 0.01% /°C
-3dB
-270°
0.80 fc
1.00 fc
5.41 fc
7.99 fc
Filter Attenuation
80.0 dB
60.0 dB
3.01 dB
0.00 dB
Cutoff Frequency
Stability
Amplitude
Phase
fc
± 0.01% /°C
-3dB
-270°
Filter Attenuation
0.29 dB
3.01 dB
60.0 dB
80.0 dB
(theoretical)
Phase Match1
0 - 0.8 fc
(theoretical)
± 1% max.
0.80 fc
1.00 fc
3.16 fc
4.64 fc
fc
± 0.01% /°C
-3dB
-155°
1.89 dB
3.01 dB
60.0 dB
80.0 dB
0 - fc
± 2° max.
± 1° typ.
± 0.2 dB max.
± 0.1 dB typ.
0.8 fc - 1.0 fc ± 0.3° dB max.
± 0.15° dB typ.
0 - fc
± 0.2 dB max.
± 0.1 dB typ.
0 - 0.8 fc
Total Harmonic
Distortion @ 1 kHz
D66
DP66
<-100 dB typ.
<-80 dB typ.
Wide Band Noise
200 µVrms typ.
Phase Match1
fc - 100 kHz
Amplitude Accuracy
1.0 - 1.25 fc
(theoretical)
± 1% max.
.21 fc
.32 fc
1.00 fc
2.5 fc
± 3° max.
± 1.5° typ.
± 0.3 dB max.
± 0.15 dB typ.
1.25fc-100kHz ± 0.2 dB max.
± 0.1 dB typ.
<-100 dB typ.
<-80 dB typ.
<-88 dB typ.
200 µVrms typ.
Wide Band Noise
400 µVrms typ.
(5 Hz - 2 MHz)
50 µVrms typ.
50 µVrms typ.
(20 Hz - 100 kHz)
Filter Mounting
Assembly
(theoretical)
0 ± 0.1 dB to 100 kHz
0 ± 0.05 dB to 120 kHz
Total Harmonic
Distortion @ 1 kHz
D66
DP66
(5 Hz - 2 MHz)
Narrow Band Noise
(non-inverting)
± 2° max.
± 1° typ.
± 3° max.
± 1.5° typ.
0.8 fc - 1.0 fc
Amplitude Accuracy
D66H6B
Narrow Band Noise
100 µVrms typ.
(20 Hz - 100 kHz)
FMA-01A
Filter Mounting
Assembly
FMA-01A
FMA-01A
1. Unit to unit match for the same transfer function, set to the same frequency and operating configuration, and from the same manufacturing lot.
2
25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839
e-mail: [email protected] • Web Address: http://www.freqdev.com
D66 & DP66 Series
Pin-Out and Package Data
Ordering Information
Specification
(25°C and Vs ± 15 Vdc)
1
Analog Input Characteristics
Impedance
10 kΩ min.
Voltage Range
± 10 Vpeak
Max. Safe Voltage
± Vs
0.80
Side View
All dimensions are in inches
All case dimensions ± 0.01"
0.025 dia.
1.80
Analog Output Characteristics
Impedance(Closed Loop)
1 Ω typ.
10 Ω max.
Linear Operating Range
± 10 V
2
Maximum Current
± 2 mA
3
Offset Voltage
2 mV typ.
20 mV max.
Offset Temp. Coeff.
50 µV / °C
Front View
0.30
0.15 (min)
0.80
0.70
OUT
-VS OS4
+VS
Bottom View
GND
IN
1.80
1.55
1.65
0.00
± 15 Vdc
± 5 to ± 18 Vdc
± 18 Vdc
0.45
0.55
0.10
0.00
0.15
Power Supply (±V)
Rated Voltage
Operating Range
Maximum Safe Voltage
Quiescent Current D66
Filter Mounting Assembly-See FMA-01A
± 18.75 mA typ.
± 30 mA max.
Quiescent Current DP66
Ordering Information
± 5.25 mA typ.
± 7.5 mA max.
Temperature
Operating
Storage
-
0 to + 70 °C
- 25 to + 85 °C
Filter Type
Transfer Function
L - Low Pass
H - High Pass
B - Butterworth
L - Bessel
D66L6B-849 Hz
DC Offset Adjustment
+ Vs
Do not connect
if trim is not
required.
20 k Ω
(Cermet)
Power Level
D – Standard Power
DP – Low Power
OS
Notes:
5
- 3 dB Corner Frequency
e.g., 849 Hz
2.50 kHz
33.3 kHz
1. Input and output signal voltage referenced to supply common.
2. Output is short circuit protected to common. DO NOT CONNECT TO ±Vs.
3. Adjustable to zero.
- Vs
4. Units operate with or with out offset pin connected.
5. How to Specify Corner Frequency:
Corner frequencies are specified by attaching a three digit frequency
designator to the basic model number. Corner frequencies can range from
1.00 Hz to 100 kHz.
We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements,
recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements,
recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright.
IN-00D66-00
3
25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839
e-mail: [email protected] • Web Address: http://www.freqdev.com
Low-Pass
6-Pole
Bessel
Appendix A
Theoretical Transfer Characteristics
Delay
(sec)
0.00
0.10
0.20
0.30
0.40
0.50
0.00
-0.029
-0.116
-0.261
-0.465
-0.728
0.00
-15.5
-31.0
-46.5
-62.0
-77.4
.430
.430
.430
.430
.430
.430
0.60
0.70
0.80
0.85
0.90
-1.05
-1.44
-1.89
-2.15
-2.42
-92.9
-108
-124
-132
-139
.430
.430
.430
.430
.430
0.95
1.00
1.10
1.20
1.30
-2.70
-3.01
-3.68
-4.44
-5.29
-147
-155
-170
-186
-201
.430
.430
.429
.428
.426
1.40
1.50
1.60
1.70
1.80
-6.23
-7.29
-8.46
-9.74
-11.1
-216
-232
-246
-261
-275
.422
.416
.401
.393
.376
1.90
2.00
2.25
2.50
2.75
-12.6
-14.2
-18.3
-22.6
-26.7
-287
-300
-328
-351
-369
.357
.335
.279
.228
187
3.00
3.25
3.50
4.00
5.00
-30.7
-34.5
-38.1
-44.7
-55.9
-385
-398
-408
-426
-449
.156
.131
.111
.083
.052
6.00
7.00
8.00
9.00
10.0
-65.2
-73.2
-80.1
-86.2
-91.6
-465
-476
-484
-490
-495
.036
.026
.020
.015
.013
1
0
-20
Amp (dB)
Phase
(deg)
-40
-60
-80
-100
0.1
2
3
4
5 6 7 8 1.0
2
3
4
5 6 7
10.0
Normalized Frequency(f/fc)
Delay (Normalized)
1.0
Delay (sec)
Amp
(dB)
0.5
0.0
0.1
2
0.15
3
4
5
6
7 8 91.0
1.5
Normalized Time (1/f sec)
Step Response
1.2
Step Response (V/V)
f/fc
(Hz)
Frequency Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
1.0
0.8
0.6
0.4
0.2
-0.0
-0.2
0
1
2
3
4
Normalized Time (1/f sec)
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
3
25 Locust St., Haverhill, Massachusetts 01830 · Tel:800/252-7074, 978/374-0761 · FAX:978/521-1839
e-mail: [email protected] · Web Address: http://www.freqdev.com · Fax on Demand: 978/521-5178
5
Low-Pass
6-Pole
Butterworth
Appendix A
Theoretical Transfer Characteristics
Frequency Response
1
Delay
(sec)
0.00
0.10
0.20
0.30
0.40
0.50
0.00
0.00
0.00
0.00
0.00
-0.001
0.00
-22.2
-44.5
-67.2
-90.4
-115
.615
.617
.624
.637
.656
.685
0.60
0.70
0.80
0.85
0.90
-0.009
-0.060
-0.289
-0.578
-1.080
-140
-167
-198
-215
-233
.731
.803
.911
.970
1.02
0.95
1.00
1.10
1.20
1.30
-1.88
-3.01
-6.17
-9.96
-13.9
-252
-270
-304
-331
-352
1.03
1.00
.845
.660
.518
1.40
1.50
1.60
1.70
1.80
-17.6
-21.2
-24.5
-27.7
-30.6
-368
-382
-393
-403
-412
.417
.345
.291
.251
.219
1.90
2.00
2.25
2.50
2.75
-33.5
-36.1
-42.3
-47.8
-52.7
-419
-425
-439
-450
-458
.193
.171
.132
.105
.086
3.00
3.25
3.50
4.00
5.00
-57.3
-61.4
-65.3
-72.2
-83.9
-465
-471
-476
-484
-496
.071
.060
.052
.039
.025
6.00
7.00
8.00
9.00
10.0
-93.4
-101
-108
-115
-120
-503
-508
-512
-515
-518
.017
.012
.0097
.0076
.0062
0
-20
Amp (dB)
Phase
(deg)
-40
-60
-80
-100
0.1
2
3
4
5 6 7 8 1.0
2
3
4
5 6 7
10.0
Normalized Frequency(f/fc)
Delay (Normalized)
2.0
Delay (sec)
Amp
(dB)
1.0
0.0
0.1
0.15
2
3
4
5
6
7 8 91.0
1.5
Normalized Time (1/f sec)
Step Response
1.2
Step Response (V/V)
f/fc
(Hz)
1.0
0.8
0.6
0.4
0.2
-0.0
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
0
1
2
3
4
Normalized Time (1/f sec)
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
8
25 Locust St., Haverhill, Massachusetts 01830 · Tel:800/252-7074, 978/374-0761 · FAX:978/521-1839
e-mail: [email protected] · Web Address: http://www.freqdev.com · Fax on Demand: 978/521-5178
5
High-Pass
6-Pole
Butterworth
Appendix A
Theoretical Transfer Characteristics
Amp
(dB)
Phase
(deg)
Delay
(sec)
0.10
0.20
0.30
0.40
0.50
-120
-83.9
-62.7
-47.8
-36.1
518
496
473
450
425
0.617
0.624
0.637
0.656
0.685
0.60
0.70
0.80
0.85
0.90
-26.6
-18.6
-11.9
-9.05
-6.57
400
373
342
325
307
0.731
0.803
0.911
0.970
1.017
0.95
1.00
1.20
1.40
1.60
-4.55
-3.01
-0.46
-0.08
-0.02
288
270
209
172
147
1.033
1.005
0.660
0.417
0.291
1.80
2.00
2.50
3.00
4.00
-0.00
-0.00
-0.00
-0.00
0.00
128
115
90.4
74.8
55.8
0.219
0.171
0.105
0.071
0.039
5.00
6.00
7.00
8.00
9.00
10.0
0.00
0.00
0.00
0.00
0.00
0.00
44.5
37.0
31.7
27.7
24.6
22.2
0.025
0.017
0.013
0.010
0.008
0.006
1
0
-20
Amp (dB)
f/fc
(Hz)
Frequency Response
-40
-60
-80
-100
0.1
2
3
4
5 6 7 8 1.0
2
3
4
5 6 7
10.0
Normalized Frequency(f/fc)
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
28
25 Locust St., Haverhill, Massachusetts 01830 · Tel:800/252-7074, 978/374-0761 · FAX:978/521-1839
e-mail: [email protected] · Web Address: http://www.freqdev.com · Fax on Demand: 978/521-5178