EL5162, EL5163, EL5262, EL5263, EL5362 ® Data Sheet P R ELI MI NA RY 300MHz Current Feedback Amplifiers with Enable The EL5162, EL5163, EL5262, EL5263, and EL5362 are current feedback amplifiers with a bandwidth of 300MHz. This makes these amplifiers ideal for today’s high speed video and monitor applications. With a supply current of just 1.5mA and the ability to run from a single supply voltage from 5V to 12V, these amplifiers are also ideal for hand held, portable or battery-powered equipment. The EL5162 also incorporates an enable and disable function to reduce the supply current to 100µA typical per amplifier. Allowing the CE pin to float or applying a low logic level will enable the amplifier. The EL5163 is offered in a 5-pin SOT-23 package, the EL5162 in a 6-pin SOT-23 and industry-standard 8-pin SO packages, the EL5262 in a 10-pin MSOP package, the EL5263 in 8-pin SO and MSOP packages, and the EL5362 in 16-pin SO and QSOP packages. All operate over the industrial temperature range of -40°C to +85°C. August 29, 2003 FN7388 Features • 500MHz -3dB bandwidth • 4000V/µs slew rate • 1.5mA supply current • Single and dual supply operation, from 5V to 12V supply span • Fast enable/disable (EL5162 only) • Available in SOT-23 packages • High speed, 1.4GHz product available (EL5167 & EL5167) • High speed, 5mA, 600MHz product available (EL5164 & EL5165) Applications • Battery powered equipment • Handheld, portable devices • Video amplifiers • Cable drivers • RGB amplifiers • Test equipment • Instrumentation • Current to voltage converters Ordering Information PACKAGE TAPE & REEL PKG. DWG. # PART NUMBER PACKAGE TAPE & REEL PKG. DWG. # EL5162IS 8-Pin SO - MDP0027 EL5263IY (Note) 8-Pin MSOP - MDP0043 EL5162IS-T7 8-Pin SO 7” MDP0027 EL5263IY-T7 8-Pin MSOP 7” MDP0043 EL5162IS-T13 8-Pin SO 13” MDP0027 EL5263IY-T13 8-Pin MSOP 13” MDP0043 EL5162IW 6-Pin SOT-23 - MDP0038 EL5263IS (Note) 8-Pin SO - MDP0027 EL5162IW-T7 6-Pin SOT-23 7” MDP0038 EL5263IS-T7 8-Pin SO 7” MDP0027 EL5162IW-T13 6-Pin SOT-23 13” MDP0038 EL5263IS-T13 8-Pin SO 13” MDP0027 EL5163IW 5-Pin SOT-23 - MDP0038 EL5362IS (Note) 16-Pin SO - MDP0027 EL5163IW-T7 5-Pin SOT-23 7” MDP0038 EL5362IS-T7 16-Pin SO 7” MDP0027 EL5163IW-T13 5-Pin SOT-23 13” MDP0038 EL5362IS-T13 16-Pin SO 13” MDP0027 EL5262IY (Note) 10-Pin MSOP - MDP0043 EL5362IU (Note) 16-Pin QSOP - MDP0040 EL5262IY-T7 10-Pin MSOP 7” MDP0043 EL5362IU-T7 16-Pin QSOP 7” MDP0040 EL5262IY-T13 10-Pin MSOP 13” MDP0043 EL5362IU-T13 16-Pin QSOP 13” MDP0040 PART NUMBER Note: Duals and triples to be released October 2003 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc. All other trademarks mentioned are the property of their respective owners. EL5162, EL5163, EL5262, EL5263, EL5362 Pinouts EL5162 (8-PIN SO) TOP VIEW NC 1 EL5162 (6-PIN SOT-23) TOP VIEW 8 CE OUT 1 7 VS+ VS- 2 IN+ 3 6 OUT IN+ 3 VS- 4 5 NC IN- 2 + EL5262 (10-PIN MSOP) TOP VIEW OUT 1 + - EL5163 (5-PIN SOT-23) TOP VIEW 6 VS+ OUT 1 5 CE VS- 2 4 IN- IN+ 3 + - EL5263 (8-PIN SO, MSOP) TOP VIEW 10 VS+ OUT1 1 IN- 2 9 OUT IN- 2 IN+ 3 8 IN- IN+ 3 VS- 4 7 IN+ CE 5 6 CE VS- 4 5 VS+ 8 VS+ 7 OUT2 + + 6 IN5 IN+ 4 IN- EL5362 (16-PIN SO, QSOP) TOP VIEW INA+ 1 CEA 2 16 INA+ VS- 3 CEB 4 14 VS+ + - INB+ 5 INC+ 8 2 13 OUTB 12 INB- NC 6 CEC 7 15 OUTA 11 NC + - 10 OUTC 9 INC- EL5162, EL5163, EL5262, EL5263, EL5362 Absolute Maximum Ratings (TA = 25°C) Supply Voltage between VS+ and VS- . . . . . . . . . . . . . . . . . . . 13.2V Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . 50mA Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 125°C Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves Pin Voltages. . . . . . . . . . . . . . . . . . . . . . . . .VS- - 0.5V to VS+ +0.5V Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . -65°C to +150°C Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA Electrical Specifications VS+ = +5V, VS- = -5V, RF = 750Ω for AV = 1, RF = 400Ω for AV = 2, RL = 150Ω, TA = 25°C unless otherwise specified. PARAMETER DESCRIPTION CONDITIONS MIN TYP MAX UNIT AC PERFORMANCE BW -3dB Bandwidth AV = +1, RL = 500Ω 500 MHz AV = +2, RL = 150Ω 233 MHz 30 MHz BW1 0.1dB Bandwidth SR Slew Rate VO = -2.5V to +2.5V, AV = +2, RL = 100Ω tS 0.1% Settling Time VOUT = -2.5V to +2.5V, AV = +1 eN 2800 4000 6000 V/µs 25 ns Input Voltage Noise 3 nV/√Hz iN- IN- Input Current Noise 10 pA/√Hz iN+ IN+ Input Current Noise 6.5 pA/√Hz dG Differential Gain Error (Note 1) AV = +2 0.05 % dP Differential Phase Error (Note 1) AV = +2 0.15 ° DC PERFORMANCE VOS Offset Voltage TCVOS Input Offset Voltage Temperature Coefficient ROL Transimpedance -5 Measured from TMIN to TMAX -2 5 mV 10 µV/°C 500 1000 kΩ V INPUT CHARACTERISTICS CMIR Common Mode Input Range ±3 ±3.3 CMRR Common Mode Rejection Ratio 50 62 -ICMR - Input Current Common Mode Rejection -1 +IIN + Input Current -8 -IIN - Input Current RIN Input Resistance CIN Input Capacitance 75 dB 1 µA/V 1 8 µA -10 1.0 10 µA 800 900 3000 kΩ 1 pF OUTPUT CHARACTERISTICS RL = 150Ω to GND ±3.35 ±3.6 ±3.75 V RL = 1kΩ to GND ±3.75 ±3.9 ±4.15 V Output Current RL = 10Ω to GND 60 100 180 mA ISON Supply Current - Enabled No load, VIN = 0V 1.3 1.5 1.7 mA ISOFF Supply Current - Disabled No load, VIN = 0V -25 -14 -5 µA VO IOUT Output Voltage Swing SUPPLY 3 EL5162, EL5163, EL5262, EL5263, EL5362 Electrical Specifications VS+ = +5V, VS- = -5V, RF = 750Ω for AV = 1, RF = 400Ω for AV = 2, RL = 150Ω, TA = 25°C unless otherwise specified. (Continued) PARAMETER DESCRIPTION CONDITIONS MIN TYP PSRR Power Supply Rejection Ratio DC, VS = ±4.75V to ±5.25V 65 77 -IPSR - Input Current Power Supply Rejection DC, VS = ±4.75V to ±5.25V -0.5 0.1 MAX UNIT dB 0.5 µA/V ENABLE (EL5162 ONLY) tEN Enable Time 200 ns tDIS Disable Time 800 ns IIHCE CE Pin Input High Current CE = VS+ 5 15 25 µA IILCE CE Pin Input Low Current CE = VS- -1 0 1 µA VIHCE CE Input High Voltage for Power-down VILCE CE Input Low Voltage for Power-down VS+ - 1 V VS+ - 3 V NOTE: 1. Standard NTSC test, AC signal amplitude = 286mVP-P, f = 3.58MHz All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 4