Rato HP529 Description : The HP529 is a Hopping code encoder for remote control systems utilizing CMOS technology process. The HP529 provides a nonlinear code algorithm to generate random code for anti-grabing application. This mean that every time the encoder is used, it comes with a new random code. Features : Pin Out : CMOS Technology Low stand by Current : 1.0 uA Wide range of operating voltage : Vcc = 1.8V ~ 13V Up to 4 data pins Total 1048576 address codes Single resistor oscillator Anti-Grabing Hopping code Absolute Maximum Rating : Symbol Vcc VI Vo Tst Top Pdis Parameter Supply Voltage Input Voltage Output Voltage Storage Temp. Operating Temp. Max. Power Dis. Conditions Vcc = 12V Rating -0.3 ~ 14 -0.3 ~ Vcc+0.3 -0.3 ~ Vcc+0.3 -40 ~ 125 -20 ~ 70 300 Unit V V V mW Electrical Characteristics : Symbol Vcc Isb Iop Ioh Iol Fop Parameter Operating Voltage Stand by Current Operating Current Source Current Sink Current Operating Freg. Conditions Vcc=12V, OSC stop K1~K3 = Low Output unloaded Vcc = 12V Vcc=12, Voh=6V Vcc=12, Vol=6V Min. 1.8 Typ. - 0.5 3 3 80K 1 Max. 13 Unit V 1.0 uA 1 mA mA mA Hz