DC/DC Converters 260 Hopping Brook Road Holliston, Massachusetts 01746 Tel. (508) 429-4440 Fax (800) 226-2100 http://www.intlpower.com IE SERIES 1 WATT SHOWN ACTUAL SIZE FEATURES • 0.12 in2 board space • 80% Efficiency • 22 Watts per in3 • 3.3, 5, 12, and 24 VDC Inputs • 1000/3000 VDC Isolation • Industry Standard Pinouts MODELS CHART OUTPUT VOLTAGE(S) 5VDC 9VDC 12VDC 15VDC OUTPUT CURRENT(S) 200mA 111mA 84mA 66mA 3.3VDC INPUT* IE0305 IE0309 IE0312 IE0315 PART NUMBERS 5VDC INPUT 12VDC INPUT IE0505 IE1205 IE0509 IE1209 IE0512 IE1212 IE0515 IE1215 24VDC INPUT IE2405 IE2409 IE2412 IE2415 Add suffix “S” for single-in-line package, suffix “D” for dual-in-line package. Add suffix “H” for 3000 VDC isolation. * Derate output by 50% for 3.3VDC input models. ELECTRICAL SPECIFICATIONS All specifications typical at nominal line, full load and 25°C Input voltage range Input reflected noise (20MHz BW) ±10% 100mV p-p max. Output voltage accuracy Line regulation Load regulation (20% to 100% Load) Output ripple and noise (20 MHz BW) Efficiency at full load 12V and 15V outputs Efficiency at full load 5V outputs Short circuit protection ±5% 1.2%/1% of Vin ±10% 100mV p-p max. 80% typical 70% typical 1 second max. Input output isolation Temperature coefficient Operating temperature range Storage temperature range Specifications subject to change. Unit requires 10mm of air space. 1000VDC/3000VDC min. 0.03% per °C max -40°C to 85°C -40°C to 71°C (no derating) -55°C to 125°C MECHANICAL SPECIFICATIONS SINGLE-IN-LINE PACKAGE DUAL-IN-LINE PACKAGE 0.30 0.045 0.300 0.10 0.010 max 0.010 0.300 BOTTOM 0.300 PIN 1 (BOTTOM VIEW) .500 max 0.500 max 0.24 max 0.400 max 0.400 max 0.020 0.27 max 0.150 max 0.15 max 0.020 0.020 Pins .01 x .02 inches PIN CONNECTIONS 1 GND 2 3 Vcc 0V 4 +V 1 GND SINGLE-IN-LINE PACKAGE 0V +V 7 5 4 Vcc DUAL-IN-LINE PACKAGE (TOP VIEW) DERATING CURVE Output Power (W) 2.0 1.5 71° 1.0 0.5 Safe Operating Area 85° 0 -40 0 50 100 150 Ambient Temperature (°C) Nov 2000