8700 E. Thomas Road Scottsdale, AZ 85252 Phone: (480) 941-6300 Fax: (480) 947-1503 P5KE5.0 thru P5KE170A FEATURES: • • • • • AVAILABLE IN BOTH UNIDIRECTIONAL AND BI-DIRECTIONAL CONSTRUCTION 5.0 TO 170 STAND-OFF VOLTAGE AVAILABLE 500 WATTS PEAK PULSE POWER DISSIPATION ESD/EFT PROTECTION MEETS ALL IEC61000-4-2 AND IEC61000-4-4 CONDITIONS UL94V-0 FLAMMABILITYCLASSIFICATION DESCRIPTION: This Transient Voltage Suppressor is an economical, molded, commercial product used to protect voltage sensitive components from destruction or partial degradation. -12 The response time of their clamping action is virtually instantaneous (1 x 10 seconds) and they have a peak pulse power rating of 500 watts for 1 ms as depicted in Figure 1 and 2. Microsemi also offers a great variety of other Transient Voltage Suppressor's to meet higher and lower power demands and special applications. 5.0 thru 170 volts 500 Watts Transient Voltage Suppressors DO-41 MAXIMUM RATINGS: 2 x ∅.032 ± .002 [.81 ± .05] Peak Pulse Power Dissipation at 25°°C: 500 Watts Steady State Power Dissipation: 2.5 Watts at TL = +50°°C ∅ .107 [2.72] max. TYPICAL CHARACTERISTIC CURVES 100 75 PULSE CURRENT IN PERCENT OF Ipp PEAK PULSE POWER (Ppp) OR CONTINUOUS POWER IN PERCENT OF 25°C RATING 3/8" Lead Length tclamping (0 volts to BV Min.): -12 -9 Unidirectional <1x10 Seconds: Bi-directional <5x10 Seconds. Operating and Storage Temperature: -55°° to +150°°C Peak Power (Single pulse) 50 Continuous Average Power Lead Length = 3/8" Peak Value Ipp 100 Pulse Time Duration (tp) is Defined as that point where Ip decays to 50% of I surge 50 1 25 .205 [5.21] MAX. 2 3 4 TIME (t) IN MILLISECONDS FIGURE 2 0 50 100 150 175 TL LEAD TEMPERATURE C FIGURE 1 DERATING CURVE SA4-57.PDF 03-20-00 PULSE WAVEFORM FOR EXPONENTIAL SURGE POLARITY Mark {cathode} 2 X1.10 [27.94] MIN. NOTE: DIMENSIONS IN [ ] =MILLIMETERS MECHANICAL CHARACTERISTICS CASE: Void free transfer molded thermosetting plastic. FINISH: Readily solderable. POLARITY: Band denotes cathode. Bi-directional not marked. WEIGHT: 0.7 gram (Appx.). MOUNTING POSITION: Any P5KE5.0 thru P5KE170A ELECTRICAL CHARACTERISTICS AT 25°C PART NUMBER BREAKDOWN VOLTAGE V(BR) TEST CURRENT IT RATED STAND OFF VOLTAGE VWM MAX. REVERSE STANDBY CURRENT ID @ VWM MAX. CLAMPING VOLTAGE VC MAX. MAX. PEAK PULSE CURRENT MAX. TEMP. COEFFICIENT IPP (Figure 2) OF V(BR) -55°°C TO 150°°C α V(BR) AMP 52 54.3 43.9 48.5 40.7 44.7 37.8 41.7 35.0 38.8 33.3 36.7 31.4 34.7 29.5 32.5 26.6 29.4 24.9 27.4 22.7 25.1 21.0 23.2 19.4 21.5 18.8 20.6 17.6 19.2 16.4 18.1 15.5 17.2 13.9 15.4 % / °C .057 .057 .059 .059 .061 .061 .065 .065 .067 .067 .070 .070 .073 .073 .076 .076 .078 .078 .081 .081 .082 .082 .084 .084 .086 .086 .087 .087 .088 .088 .090 .090 .092 .092 .093 .093 @ IPP P5KE5.0 P5KE5.0A P5KE6.0 P5KE6.0A P5KE6.5 P5KE6.5A P5KE7.0 P5KE7.0A P5KE7.5 P5KE7.5A P5KE8.0 P5KE8.0A P5KE8.5 P5KE8.5A P5KE9.0 P5KE9.0A P5KE10 P5KE10A P5KE11 P5KE11A P5KE12 P5KE12A P5KE13 P5KE13A P5KE14 P5KE14A P5KE15 P5KE15A P5KE16 P5KE16A P5KE17 P5KE17A P5KE18 P5KE18A P5KE20 P5KE20A MIN. MAX VOLTS 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 VOLTS 7.30 7.00 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 SA4-57.PDF 03-20-00 mA 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VOLTS 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 µ ADC 600 600 600 600 400 400 150 150 50 50 25 25 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VOLTS 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 P5KE5.0 thru P5KE170A ELECTRICAL CHARACTERISTICS AT 25°C PART NUMBER BREAKDOWN VOLTAGE V(BR) TEST CURRENT IT RATED STAND OFF VOLTAGE VWM MAX. REVERSE STANDBY CURRENT ID @ VWM MAX. CLAMPING VOLTAGE VC MAX. MAX. PEAK PULSE CURRENT MAX. TEMP. COEFFICIENT IPP (Figure 2) OF V(BR) -55°°C TO 150°°C α V(BR) AMP 12.7 14.1 11.6 12.8 10.7 11.9 9.9 11.0 9.3 10.3 8.5 9.4 7.8 8.6 7.0 7.8 6.5 7.2 6.2 6.9 5.8 6.5 5.5 6.1 5.2 5.7 4.9 5.3 4.7 5.2 4.4 4.9 4.0 4.4 3.7 4.1 % / °C .094 .094 .096 .096 .097 .097 .098 .098 .099 .099 .100 .100 .101 .101 .101 .101 .102 .102 .102 .102 .103 .103 .103 .103 .104 .104 .104 .104 .104 .104 .105 .105 .105 .105 .105 .105 @ IPP P5KE22 P5KE22A P5KE24 P5KE24A P5KE26 P5KE26A P5KE28 P5KE28A P5KE30 P5KE30A P5KE33 P5KE33A P5KE36 P5KE36A P5KE40 P5KE40A P5KE43 P5KE43A P5KE45 P5KE45A P5KE48 P5KE48A P5KE51 P5KE51A P5KE54 P5KE54A P5KE58 P5KE58A P5KE60 P5KE60A P5KE64 P5KE64A P5KE70 P5KE70A P5KE75 P5KE75A MIN. MAX VOLTS 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 60.0 60.0 64.4 64.4 66.7 66.7 71.1 71.1 77.8 77.8 83.3 83.3 VOLTS 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 54.3 49.1 58.4 52.8 61.1 55.3 65.1 58.9 69.3 62.7 73.3 66.3 78.7 71.2 81.5 73.7 86.9 78.6 95.1 86.0 102.0 92.1 SA4-57.PDF 03-20-00 mA 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VOLTS 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 µ ADC 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VOLTS 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103.0 93.6 107.0 96.8 114.0 103.0 125.0 113.0 134.0 121.0 P5KE5.0 thru P5KE170A ELECTRICAL CHARACTERISTICS AT 25°C PART NUMBER BREAKDOWN VOLTAGE V(BR) TEST CURRENT IT RATED STAND OFF VOLTAGE VWM MAX. REVERSE STANDBY CURRENT ID @ VWM MAX. CLAMPING VOLTAGE VC MAX. MAX. PEAK PULSE CURRENT MAX. TEMP. COEFFICIENT IPP (Figure 2) OF V(BR) -55°°C TO 150°°C α V(BR) AMP 3.6 4.0 3.3 3.6 3.1 3.4 2.8 3.1 2.6 2.8 2.3 2.0 2.2 2.4 1.9 2.1 1.7 1.9 1.6 1.8 % / °C .106 .106 .106 .106 .107 .107 .107 .107 .107 .107 .107 .107 .108 .108 .108 .108 .108 .108 .108 .108 @ IPP P5KE78 P5KE78A P5KE85 P5KE85A P5KE90 P5KE90A P5KE100 P5KE100A P5KE110 P5KE110A P5KE120 P5KE120A P5KE130 P5KE130A P5KE150 P5KE150A P5KE160 P5KE160A P5KE170 P5KE170A MIN. MAX VOLTS 86.7 86.7 94.4 94.4 100.0 100.0 111.0 111.0 122.0 122.0 133.0 133.0 144.0 144.0 167.0 167.0 178.0 178.0 189.0 189.0 VOLTS 106.0 95.8 115.0 104.0 122.0 111.0 136.0 123.0 149.0 135.0 163.0 147.0 176.0 159.0 204.0 185.0 218.0 197.0 231.0 209.0 mA 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VOLTS 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 µ ADC 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VOLTS 139.0 126.0 151.0 137.0 160.0 146.0 179.0 162.0 196.0 177.0 214.0 193.0 231.0 209.0 268.0 243.0 287.0 259.0 304.0 275.0 Note: For Bi-directional construction, indicate a C or CA suffix after the part number, i.e. P5KE5.0CA SA4-57.PDF 03-20-00 P5KE5.0 thru P5KE170A C-CAPACITANCE - PICOFARADS 10000 MEASURED AT ZERO BIAS 1000 100 MEASURED AT STANDOFF VOLTAGE 10 0 10 V (BR) 1000 100 - BREAKDOWN VOLTAGE - VOLTS FIGURE 3 TYPICAL CAPACITANCE VS BREAKDOWN VOLTAGE 70 50 30 (PPP) - Peak Pulse Power, (kW) 20 T C = 25ºC 10 7.0 5.0 3.0 2.0 Ipp IMPULSE EXPONENTIAL DECAY 1.0 0.5 1.0 tw 0.7 Ipp 0.5 HALF SINE tw tp 0.3 SQUARE 0.2 tw CURRENT WAVE FORM 0.1 0.1 t w = .7tP Ipp 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 tw - Pulse Width µs FIGURE 4 PEAK PULSE POWER VS. PULSE TIME SA4-57.PDF 03-20-00 1000 10000