LT1117 1A Low Dropout Voltage Regulator 2010-version 2 DESCRIPTION FEATURES The LT1117 series of positive adjustable and fixed regulators are designed to provide 1A with high efficiency. All internal circuitry is designed to operate down to 1.4V input to output differential. On-chip trimming adjusts the reference voltage to 1%. Current limit the typical value of 1.5A allows to minimize the stress on both the regulator and the power source circuitry under overload conditions. Adjustable or Fixed Output Output Current of 1A Low Dropout, 1.3 V typ. at 1A Output Current 0.04% Line Regulation 0.2 % Load Regulation 100% Thermal Limit Burn-In Fast Transient Response APPLICATIONS High Efficiency Linear Regulators Post Regulators for Switching Supplies Adjustable Power Supply TYPICAL APPLICATION DATA Fixed Voltage Regulator LT1117-3.3 S1117M1-3.3 U1 >4.7V VVININ>4.6V 3 TAB IN + C1 10F Tant VOUT =3.3V 2 OUT + GND 1 C2 10F Tant.Min Adjustable Voltage Regulator LT1117-ADJ S1117M1 U1 IN>4.85V VV IN >4.75V 3 TAB TAB IN IN + C1 10 F Tant VOUT =VREF 1+ VOUT =3.45V 2 OUT OUT + C2 10F Tant.Min R1 133 Ohm, 1% Adj Addition 1 R2 232 Ohm, 1% R2 +IADJR2 R1 Notes: 1) C1 needed if device is far from filter capacitors 2) C2 minimum value required for stability PACKAGE INFORMATION 1 2 3 1 2 3 1 2 3 PIN FUNCTION 1 ADJ/GND 2 OUTPUT 3 INPUT SOT-223 TO-263 TAB IS OUTPUT TO-220 地址: 南京市珠江路 88 号,新世界中心 B 座 4004 室, 邮编:210008 ADD.: RM. 4004, BLOCK B, NEW WORLD CENTER, 电话(TEL.): (86)-25-68853600 NO. 88 ZHUJIANG ROAD, 1 NANJING 210008, CHINA 传真(FAX): (86)-25-68853600-810 WEB-SITE: WWW.HN-ELEC.COM LT1117 1A Low Dropout Voltage Regulator 2010-version 2 ABSOLUTE MAXIMUM RATINGS Symbol PD VIN VIN-VOUT TJ T STG TLEAD VESD Parameter Power Dissipation Input Voltage Voltage Difference Operating Junction Temperature Range Storage Temperature Lead Temperature (Soldering, 10 sec) Minimum ESD Rating (HBM) Maximum Internally Limited 13 10 -40 to 125 -65 to 150 300 2 Units W V V o C o C o C kV DEVICE SELECTION GUIDE Device Output Voltage LT1117-ADJ ADJ LT1117 -1.5 1.5V LT1117 -1.8 1.8V LT1117 -2.5 2.5V LT1117 -2.85 2.85V LT1117 -3.0 3.0V LT1117 -3.3 3.3V LT1117 -3.5 3.5V LT1117 -5.0 5.0V Other fixed versions are available Vout = 1.5V to 5.0V ELECTRICAL CHARACTERISTICS Electrical Characteristics at ILOAD = 0 mA and TJ = +25C unless otherwise specified. LT1117-ADJ , All fixed versions LT1117-ADJ All fixed versions LT1117-ADJ The * denotes the specifications which apply over the full temperature range. Note 1: Low duty pulse testing with Kelvin connections required. Note 3: VOUT, VREF=1% ADD.: RM. 4004, BLOCK B, NEW WORLD CENTER, 电话(TEL.): (86)-25-68853600 NO. 88 ZHUJIANG ROAD, 2 NANJING 210008, CHINA Note 2: 120Hz input ripple (CADJ for ADJ=25F) 地址: 南京市珠江路 88 号,新世界中心 B 座 4004 室, 邮编:210008 传真(FAX): (86)-25-68853600-810 WEB-SITE: WWW.HN-ELEC.COM LT1117 1A Low Dropout Voltage Regulator 2010-version 2 BLOCK DIAGRAM 地址: 南京市珠江路 88 号,新世界中心 B 座 4004 室, 邮编:210008 ADD.: RM. 4004, BLOCK B, NEW WORLD CENTER, 电话(TEL.): (86)-25-68853600 NO. 88 ZHUJIANG ROAD, 3 NANJING 210008, CHINA 传真(FAX): (86)-25-68853600-810 WEB-SITE: WWW.HN-ELEC.COM LT1117 1A Low Dropout Voltage Regulator 2010-version 2 TYPICAL APPLICATION CIRCUITS 1.2V to 10V Adjustable Regulator 5V Regulator with Shutdown LT1117-ADJ VIN IN LT1117-ADJ VOUT† OUT R1 121Ω ADJ + IN 121Ω 1% 10µF C2 100µF R2 1k 5V OUT ADJ + + C1* 10µF VIN + 100µF 1k 2N3904 TTL 365Ω 1% 1k * NEEDED IF DEVICE IS FAR FROM FILTER CAPACITORS R2 †V — OUT = 1.25V 1 + R1 ( ) Adjusting Output Voltage of Fixed Regulators Regulator with Reference LT1117-5.0 LT1117-5.0 VIN > 12V IN + OUT + GND 10µF 5V TO 10V VIN > 11.5V 100µF IN + OUT GND 10µF + 10V 100µF 5VOUT + 10µF* LT1029 1k * OPTIONAL IMPROVES RIPPLE REJECTION Low Dropout Negative Supply LT1117-5.0 VIN IN OUT GND + 10µF + 100µF VOUT = –5V FLOATING INPUT 地址: 南京市珠江路 88 号,新世界中心 B 座 4004 室, 邮编:210008 ADD.: RM. 4004, BLOCK B, NEW WORLD CENTER, 电话(TEL.): (86)-25-68853600 NO. 88 ZHUJIANG ROAD, 4 NANJING 210008, CHINA 传真(FAX): (86)-25-68853600-810 WEB-SITE: WWW.HN-ELEC.COM