CHINA GUANGDONG DONGGUAN HAROM ELECTRONICS CO., LTD Digital transistors (built-in resistors) www.harom.cn tel:86-769-87058050 DTA114EE/DTA114EUA/DTA114EKA /DTA114ESA/ DTA114ECA DIGITAL TRANSISTOR (PNP) FEATURES 1. Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors(see equivalent circuit). 2. The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input.They also have the advantage of almost completely eliminating parasitic effects. 3. Only the on/off conditions need to be set for operation, making device design easy. PIN CONNENCTIONS AND MARKING DTA114EUA DTA114EE SOT-523 Addreviated symbol: 14 DTA114EKA SOT-323 Addreviated symbol: 14 DTA114ECA SOT-23-3L Addreviated symbol: 14 DTA114ESA TO-92S SOT-23 Addreviated symbol: 14 Absolute maximum ratings(Ta=25℃) Limits (DTA114E□) Parameter Symbol Supply voltage VCC -50 V Input voltage VIN -40~10 V IO -50 IC(MAX) -100 Output current E UA CA 150 KA SA Unit mA Power dissipation Pd 200 300 mW Junction temperature Tj 150 ℃ Storage temperature Tstg -55~150 ℃ Electrical characteristics (Ta=25℃) Parameter Input voltage Symbol Min. Typ VI(off) VI(on) Max. -0.5 -3 Unit V Conditions VCC=-5V ,IO=-100µA VO=-0.3V ,IO=-10 mA Output voltage VO(on) -0.3 V IO/II=-10mA/-0.5mA Input current II -0.88 mA VI=-5V Output current IO(off) -0.5 µA VCC=-50V, VI=0 DC current gain GI 30 Input resistance R1 7 10 13 Resistance ratio R2/R1 0.8 1 1.2 Transition frequency fT Typical Characteristics VO=-5V ,IO=-5mA 250 KΩ MHz VCE=-10V ,IE=5mA,f=100MHz