深圳市杰鸿顺电子有限公司 MASTER INSTRUMENT CORPORATION SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER SS22 THRU SS210 VOLTAGE RANGE Forward Current 20 to 100 Volts 2.0 Amperes SS28 SS29 FEATURES l For surface mount applications l Metal-Semiconductor Junction with Guarding l Epitaxial Construction l Metal-Semiconductor Junction with Guarding l Very Low forward voltage drop l High Current capability l For use in low voltage, high frequency inventers, Free wheeling, and polarity protection applications l High temperature soldering guaranteed: 250 oC/10 seconds at terminals MECHANICAL DATA l Case: Molded Plastic l Terminals: Solder Plated, Solderable per MIL-STD-750 Method 2026 l Polarity: Indicated by Cathode Band l Weight: 0.003ounce, 0.093gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate by 20%. SS22 SS23 SS24 Maximum Repetitive Peak Reverse Voltage VRRM 20 30 40 50 60 80 90 100 Volts Maximum RMS Voltage VRMS 14 21 28 35 42 56 63 70 Volts Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 90 100 Volts Maximum Average Forward Rectified Current at TL=105℃ I(AV) 2.0 Amps Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50 Amps Maximum Forward Voltage at 2.0A DC VF MaximumDC Reverse Current at rated DC blocking voltage (Note 1) TA=25℃ TA=100℃ Typical Junction Capacitance (Note 1) Typical thermal capacitance (Note 2) 0.55 SS25 SS26 SS210 UNITS SYMBOLS 0.75 0.85 Volts IR 0.5 15.0 mA CJ 75 PF ℃/W RQJL 15 Operating Temperature Range TJ -55 to +125 Storage temperature range TSTG -55 to +150 ℃ NOTES: 1. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Thermal Resistance Junction to Lead. http://jhs-ic.hqew.com E-mail: [email protected] Web Site: www.cnmic.com 1/2 深圳市杰鸿顺电子有限公司 MASTER INSTRUMENT CORPORATION SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER SS22 THRU SS210 http://jhs-ic.hqew.com E-mail: [email protected] VOLTAGE RANGE Forward Current 20 to 100 Volts 2.0 Amperes Web Site: www.cnmic.com 2/2