SDM02U30LP3 ULTRA-SMALL SURFACE MOUNT SCHOTTKY DIODE Product Summary ADVANCE INFORMATION VRRM (V) 30 IO (mA) 100 Features VF max(V) 0.37 IR max (μA) 7 Description The SDM02U30LP3 is a schottky barrier diode optimized for ultra lowforward voltage drop and low reverse leakage current. Encapsulated in 2 the ultra-small DFN-0603 with footprint of 0.18mm and ultra-low package profile, this device is designed for saving PCB space in portable electronic devices. Applications • • • • • • • • • • • Mechanical Data • • • • • Reverse Voltage and Current Protection Blocking diode Clamping protection LCD and Key Pad Backlighting Freewheeling diode. 2 0.18mm footprint – 70% smaller than DFN1006/SOD923 Off board profile of 0.35mm – 30% thinner than the DFN1006 Low forward voltage of 0.37V (max) – minimises power dissipation losses Low leakage – maximises battery power Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) • Case: X3-DFN0603-2 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminal Connections: Cathode Bar Terminals: Finish − Matte Tin Finish over Copper Leadframe (Lead Free Plating). Solderable per MIL-STD-202, Method 208 Weight: 0.2mg (Approximate) X3-DFN0603-2 Bottom View Top View Ordering Information (Note 4) Part Number SDM02U30LP3-7B Notes: Case X3-DFN0603-2 Packaging 10,000/Tape & Reel 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com. Marking Information L2 = Product Type Marking Code Bar Denotes Cathode Side SDM02U30LP3 Document number: DS35774 Rev. 3 - 2 1 of 4 www.diodes.com October 2012 © Diodes Incorporated SDM02U30LP3 Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current (8.33ms Half-Sine Waveform) Symbol VRRM VRWM VR VR(RMS) IO Value Unit 30 V 21 100 V mA IFSM 500 mA Symbol PD RθJA TJ, TSTG Value 250 500 -65 to +150 Unit mW °C/W °C Thermal Characteristics Characteristic Power Dissipation (Note 5) Thermal Resistance Junction to Ambient Air (Note 5) Operating and Storage Temperature Range Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Forward Voltage VF Leakage Current (Note 5) IR Min ⎯ ⎯ ⎯ ⎯ Typ Max 0.37 ⎯ 7 ⎯ ⎯ 0.20 ⎯ 4 Unit V µA Test Condition IF = 10mA IF = 10mA; TA = +125°C VR = 10V VR = 30V 5. Part mounted on FR-4 PC board with recommended pad layout, which can be found on our website at http://www.diodes.com. 6. Short duration pulse test used to minimize self-heating effect. 0.3 Note 5 0.2 0.1 0 0 0.1 0.2 0.3 IF(AV) AVERAGE FORWARD CURRENT (A) Figure 1 Forward Power Dissipation SDM02U30LP3 Document number: DS35774 Rev. 3 - 2 IF, INSTANTANEOUS FORWARD CURRENT (mA) Notes: PD, POWER DISSIPATION (W) ADVANCE INFORMATION Maximum Ratings (@TA = +25°C, unless otherwise specified.) 2 of 4 www.diodes.com 100 T A = 150°C T A = 125°C 10 TA = 85°C 1 TA = 25°C TA = -55°C 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 2 Typical Forward Characteristics October 2012 © Diodes Incorporated 0.30 IF(AV), AVERAGE FORWARD CURRENT (A) IR, INSTANTANEOUS REVERSE CURRENT (µA) 10,000 1,000 T A = 125°C 100 T A = 85°C 10 1 T A = 25°C 0.1 0.01 T A = -55°C 0.001 0.0001 0 5 10 15 20 25 30 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 3 Typical Reverse Characteristics 0.25 0.20 0.15 Note 5 0.10 0.05 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Figure 4 Forward Current Derating Curve 10 f = 1MHz CT, TOTAL CAPACITANCE (pF) ADVANCE INFORMATION SDM02U30LP3 1 0 5 10 15 20 25 30 VR, DC REVERSE VOLTAGE (V) Figure 5 Total Capacitance vs. Reverse Voltage Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A A1 (2x) D e E b (2x) X3-DFN0603-2 Dim Min Max Typ A 0.27 0.35 0.30 A1 0.00 0.03 0.02 b 0.19 0.29 0.24 D 0.595 0.645 0.62 E 0.295 0.345 0.32 e 0.355 L 0.14 0.24 0.19 All Dimensions in mm L (2x) SDM02U30LP3 Document number: DS35774 Rev. 3 - 2 3 of 4 www.diodes.com October 2012 © Diodes Incorporated SDM02U30LP3 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. 1 X Value (in mm) 0.355 0.150 0.230 0.610 0.300 G C ADVANCE INFORMATION X Y Dimensions C G X X1 Y IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com SDM02U30LP3 Document number: DS35774 Rev. 3 - 2 4 of 4 www.diodes.com October 2012 © Diodes Incorporated