150U(R)L Standard Recovery Diodes STUD VERSION L iu j in g re ct i f ie r c o . , L t d . FEATURES TYPICAL APPLICATIONS 1). Diffused diode 1). Welders 2). Wide current range 2). Power supplies 3). High voltage ratings up to 1200V 3). Machine tool controls 4). High surge current capabilities 4). High power drives 5). Stud cathode and stud anode version 5). Medium traction applications 6). Hermetic metal case 6). Battery charges 7). Free-wheeling diodes MAJOR RATINGS AND CHARACTERISTICS Parameters IF(AV) 150U(R)L UNIT 150 A 125 ℃ 235 A @ 50Hz 3000 A @ 60Hz 3140 A @ 50Hz 45 A2s @ 60Hz 41 A2s @ TC IF(RMS) IFSM I2t VRRM range 600 and 1200 V TJ range - 40 to 180 ℃ ELECTRICAL SPECIFICATIONS 1). Voltage Ratings Type number 150U(R)L www.china-liujing.com VRRM, maximum repetitive peak reverse voltage VRSM, maximum nonrepetitive peak reverse voltage IRRM max. @ TJ = TJ max V V mA 60 600 700 80 800 900 100 1000 1100 120 1200 1300 Voltage Code 15 1/4 150U(R)L 2). Forward Conduction Parameters IF(AV) 150U(R)L Unit Max. average forward current 150 A @ Case temperature 125 ℃ 235 A IF(RMS) Max. RMS forward current Max. peak, one-cycle forward, IFSM I2t I2√t rf non-repetitive surge current A 3140 45 Maximum I2t for fusing KA2s 41 Maximum I2√t for fusing Slope resistance VF(TO) Threshold voltage VFM 3000 Max. forward voltage drop - KA2√s 0.97 mΩ 0.80 V 1.47 V TJ Max. junction operating temperature range -40 to 180 Tstg Max. storage temperature range -40 to 180 RthJC Max. thermal resistance, junction to case RthCS Max. thermal resistance, case to heatsink Max. allowed mounting torque +0 -20% wt Approximate weight 0.3 Dc @ 110℃ t = 10ms No voltage t = 8.3ms reapplied Sinusoidal half wave, t = 10ms No voltage Initial TJ = TJ max. t = 8.3ms reapplied t = 0.1 to 10ms, no voltage reapplied @ TJ = TJ max. Ipk= 600A, TJ = 25℃, tp = 10ms sinusoidal wave DC operation K/W 0.1 Mounting surface, smooth, flat and greased Not lubricated threads Nm 14.5 130 Lubricated threads g DO-8 Case style 180° conduction, half sine wave ℃ 17 T Conditions See Outline Table ΔRthJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction Rectangular conduction 180° 0.031 0.023 120° 0.038 0.040 90° 0.048 0.053 60° 0.071 0.075 30° 0.120 0.121 www.china-liujing.com Units Conditions K/W TJ = TJ max. 2/4 150U(R)L Maximum Allowable Case Temperature (°C) 180 RthJC (DC) = 0.3 K/W 160 Conduction Angle 140 120 180˚ 80 120˚ 60˚ 30˚ 100 90˚ 0 50 100 150 180 RthJC (DC) = 0.3 K/W 160 Conduction Period 140 30˚ DC 60˚ 90˚ 120 120˚ 180˚ 100 80 200 0 40 80 120 160 200 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) PERFORMANCE CURVES FIGURE 300 180˚ 120˚ 90˚ 250 Rt hS A 60˚ 30˚ 200 150 0.2 K/ W 100 0 K/ W 0.4 K/W 0.6 K/W RMS Limit Conduction Angle 50 =0 .0 5 -D el ta R 1.2 K /W Tj = 180˚C 0 50 100 150 Average Forward Current (A) 80 200 100 120 140 160 180 160 180 Maximum Allowable Ambient Temperature (°C) Maximum Average Forward Power Loss (W) Fig. 3 - Forward Power Loss Characteristics 300 180˚ 120˚ 250 RMS Limit 90˚ 60˚ 30˚ 200 150 Rt hS A DC 0.2 K/W 100 Conduction Period 50 0 0.4 K/W 0.6 K/W 0.8 K /W 50 100 150 200 -D elt aR 1.2 K/W Tj = 180˚C 0 =0 .05 K/ W 250 Average Forward Current (A) 300 80 100 120 140 Maximum Allowable Ambient Temperature (°C) 3500 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave Forward Current (A) Fig. 4 - Forward Power Loss Characteristics At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 180˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 3000 2500 2000 1500 1000 500 Per Junction 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current www.china-liujing.com 4000 3500 3000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T j = 180˚C No Voltage Reapplied Rated V rrm Reapplied 2500 2000 1500 1000 Per Junction 500 0.01 0.1 1 Pulse Train Duration(s) Fig. 6 - Maximum Non-Repetitive Surge Current 3/4 10000 1000 100 Tj = 25˚C Tj = 180˚C 10 0.5 1 1.5 2 2.5 Instantaneous Forward Voltage (V) 3 Fig. 7 - Forward Voltage Drop Characteristics Transient Thermal Impedance Z thJC (K/W) Instantaneous Forward Current (A) 150U(R)L 1 Steady State Value RthJC = 0.3 K/W (DC Operation) 0.1 0.01 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristic OUTLINE Case Style DO-8 E-mail: [email protected] YUEQING LIUJING RECTIFIER CO., LTD Sale Departmant: Liujing Building, Yueqing City, Zhejiang Province Add: Wanao Industrial Zone, Yueqing city, Zhejiang Province Tel: 0086-577-62519692 0089-577-62519693 Fax: 0086-577-62518692 International Export: 0086-577-62571902 Technical Support: 0086-15868768965 After Service: 400-6606-086 http://www.china-liujing.com http://www.liujingdianqi.cn http://www.cnrectifier.com http://www.cnthyristor.com.cn MSN: [email protected] [email protected] 打造最具竞争力的电力半导体产品 To be the most competitive Power Semiconductor Devices manufactory. LIUJING reserves the right to change limits, test conditions and dimensions. 윤정은 이 칼타로그 중에 데이트, 테스트 조건, 외형사이즈에 대한 최종 해석권을 가지고 있습니다. www.china-liujing.com 4/4