3KV ISOLATED UNREGULATED DUAL OUTPUT DC/DC CONVERTER FxxxxS-2W SERIES DESCRIPTION The FxxxxS-2W series of DC/DC Converters is particularly suited to isolating and/or converting DC power rails. The galvanic isolation allows the device to be configured to provide an isolated negative rail in systems where only positive rails exist. The wide temperature range guarantees startup from –40°C and full 2 watt output at 85°C. FEATURES � RoHS compliant � 5V, 12V & 15V input � Single isolated output � 5V, 9V, 12V & 15V output � 3kVDC isolation � No heatsink required � Efficiency up to 85% � Internal SMD construction � Wide temperature performance at full 2 watt load, –40°C to � Fully encapsulated with toroidal magnetics 85°C � No external components required � Power density 1.44W/cm3 � MTTF up to 2327 khours � UL 94V-0 package material � Custom solutions available � Footprint from 1.46cm2 � PCB mounting � Industry standard pinout SELECTION GUIDE Order Code Input Output Output Output Voltage Voltage Current current (V) (V) MAX(mA) Min(mA) % pF kHrs 5 15 133 14 82 19 2327 F0515S-2W Efficiency Isolation MTTF1 Capacitance Package Style SIP When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the additional external capacitance for reliable start up. INPUT CHARACTERISTICS Parameter Voltage Range Reflected ripple current Conditions Min. Typ. Max. Continuous operation, 5V input types 4.5 5 5.5 Continuous operation, 12V input types 10.8 12 13.2 5V input types 38 12V input types 33 Units V mA p-p OUTPUT CHARACTERISTICS Parameter Rated Power 2 Conditions Typ. TA=-40°C to 85°C Voltage Set Point Accuracy See tolerance envelope Line regulation High VIN to low VIN WWW.TYCEM.COM Min. Copyright Guangzhou Tycem Electronics Limited 1 Max. Units 2 W 1.2 %/% Page 1 of 3 3KV ISOLATED UNREGULATED DUAL OUTPUT DC/DC CONVERTER FxxxxS-2W SERIES Load Regulation Ripple and Noise 10% load to rated load, 5V output types 7.0 8.5 10% load to rated load, 9V output types 4.5 5.2 10% load to rated load, 12V output types 4.5 5.5 10% load to rated load, 15V output types 3.7 8.5 10% load to rated load, 5V output types 7.0 8.5 10% load to rated load, 9V output types 4.5 5.2 F0505S-2W, BW=DC to 20MHz 96 F0509S-2W, BW=DC to 20MHz 67 F0512S-2W, BW=DC to 20MHz 59 F0515S-2W, BW=DC to 20MHz 53 F1205S-2W, BW=DC to 20MHz 76 F1209S-2W, BW=DC to 20MHz 63 F1212S-2W, BW=DC to 20MHz 53 F1215S-2W, BW=DC to 20MHz 45 200 % mV p-p ABSOLUTE MAXIMUM RATINGS Short-circuit protection 3 1 second Lead temperature 1.5mm from case for 10 seconds 300℃ Internal power dissipation 450mW Input voltage VIN, B05 types 7V Input voltage VIN, B12 types 15V GENERAL CHARACTERISTICS Parameter Conditions Switching frequency All input types Min. Type Max. 100 Units kHz TEMPERATURE CHARACTERISTICS Parameter Conditions Min. Type Max. Specification 5V & 12V input types -40 85 Storage All -50 150 Case Temperature above ambient Cooling 5V output types 45 All other output types 36 Units °C Free air convection ISOLATION CHARACTERISTICS Parameter Conditions Min. Isolation test voltage Flash tested for 1 second 3000 Resistance Viso= 1000VDC 1. Calculated using MIL-HDBK-217F with nominal input voltage at full load. 2. See derating graph 3. Supply voltage must be discontinued at the end of the short circuit duration. Type Max. Units VDC 10 GΩ All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified. WWW.TYCEM.COM Copyright Guangzhou Tycem Electronics Limited Page 2 of 3 3KV ISOLATED UNREGULATED DUAL OUTPUT DC/DC CONVERTER FxxxxS-2W SERIES CKAGE SPECIFICATIONS PA PACKAGE PIN FUNCTION 1 Vin 2 GND Guangzhou Tycem Electronics Limited Web:www.tycem.com 220 7/81696730 Tel:+ 86 20 8163 8163220 2207/81696730 WWW.TYCEM.COM 5 0V 6 No Pin 7 +V Email:[email protected] Fax:+ 86 20 81576282 Copyright Guangzhou Tycem Electronics Limited Page 3 of 3