GP1601 thru GP1607 Pb Free Plating Product ® Pb GP1601 thru GP1607 16.0 Ampere Dual Common Cathode General Purpose Rectifier Diodes Features Glass passivated chip junction Low forward voltage drop High current capability Low reverse leakage current High surge current capability TO-220AB Unit : inch (mm) .419(10.66) .196(5.00) .387(9.85) .163(4.16) .139(3.55) MIN .054(1.39) .177(4.5)MAX Automotive Inverters/Solar Inverters Plating Power Supply,SMPS and UPS Car Audio Amplifiers and Sound Device Systems .038(0.96) .019(0.50) Mechanical Data Case: Heatsink TO-220AB Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 Polarity: As marked on diode body Mounting position: Any Weight: 2.1 gram approxiamtely .1(2.54) .624(15.87) .548(13.93) Application .50(12.7)MIN .269(6.85) .226(5.75) .045(1.15) .025(0.65)MAX .1(2.54) Case Case Positive Common Cathode Negative Common Anode Suffix "A" Case Doubler Tandem Polarity Suffix "D" Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TC = 100 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @8.0A Maximum DC Reverse Current @ TC=25 oC at Rated DC Blocking Voltage @ TC=125 oC Typical Junction Capacitance ( Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range GP GP GP GP GP GP Units Symbol GP 1601 1602 1603 1604 1605 1606 1607 VRRM 50 100 200 400 600 800 1000 V VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V I(AV) 16.0 A IFSM 150 A VF 1.1 V 10 250 50 1.5 - 65 to + 150 uA uA pF o C/W o C IR Cj RθJC TJ ,TSTG Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25” Al-Plate. Rev.04/2014 © 2006 Thinki Semiconductor Co.,Ltd. Page 1/2 http://www.thinkisemi.com/ GP1601 thru GP1607 ® RATINGS AND CHARACTERISTIC CURVES (GP1601 THRU GP1607) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE FIG.2- TYPICAL REVERSE CHARACTERISTICS 100 16 40 14 12 Single Phase Half Wave 60Hz Resistive of Inductive Load 10 8 0 50 100 150 o CASE TEMPERATURE. ( C) INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD CURRENT. (A) 18 FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 10 Tj=125 0C 4 2 1.0 0.4 Tj=25 0C 0.2 PEAK FORWARD SURGE CURRENT. (A) 175 0.1 8.3ms Single Half Sine Wave JEDEC Method 150 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 125 100 45 50 FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 25 400 0 1 2 5 10 20 50 100 200 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS FORWARD CURRENT. (A) 100 FIG.4- TYPICAL JUNCTION CAPACITANCE 120 JUNCTION CAPACITANCE.(pF) 100 80 Tj=25 0C 60 40 40 20 10 4 2 1 Tj=25oC Pulse Width=300 s 1% Duty Cycle 0.4 20 0.2 0 1 5 10 50 100 REVERSE VOLTAGE. (V) Rev.04/2014 © 2006 Thinki Semiconductor Co.,Ltd. 500 1000 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE. (V) Page 2/2 http://www.thinkisemi.com/