F2520 Oil Free Repair Manual 17 September, 2000 TAB: 2.5 Horsepower - Single Cylinder F2520 (cont’d) KEY NO. 4 7 8 9 11 12 13 14 15 16 17 18 19 20 22 24 26 27 28 29 30 31 32 34 35 36 37 38 39 40 42 43 45 46 48 50 51 52 53 54 PART NUMBER CAC-1140 CAC-1121 SS-655-ZN CAC-1080 CAC-4317 CAC-1099 SSF-505 CAC-1098 ----SSF-8080-ZN CAC-4293 CAC-60 ----SUDL-6-1 CAC-1304-1 CAC-1120 CAC-4290-3 SSP-7813 AC-0155 SSN-8001 SSP-7821-1 CAC-1155 C-GA-362 SS-2072-1 SS-2071 H-2099 CAC-4296-1 SS-3222-CD CAC-365 TIA-4125 SUDL-403-1 CAC-4220-2 CAC-1085 SSP-7811 SSP-9013 SSP-6088 CAC-4215-1 SSW-7367 KK-4315 SSF-981 Oil Free Repair Manual DESCRIPTION Shroud - front Bracket (2 used - included with #10) Hex Nut 1/4"-20 (2 used) Tool tray Rear shroud assembly (includes 2 ea. #7) U-Channel isolator Shoulder screw (2 used) Isolator (2 used) ----Nut 3/8"-16 (2 used) Wheel 8" (2 used) Shoulder bolt 3/8"-16 x 2 1/4" (2 used) ----Rubber foot strip Handle (black finish) Silicone Sleeve Check valve Nut sleeve assembly (for 3/8" O.D. Tube) Shroud Plate Screw (2 used) Nut (tighten until it stops against head) Outlet tube Pressure Gauge (2 used) Nipple (3/8" NPT x 1 1/2" long) Nipple (1/4" NPT x 1 1/2" long) Adapter Regulator Pipe plug 1/4" NPT Manifold Safety valve ASME Cord assembly - line Pressure switch Pressure relief tube (warm tube before installing on #50) Nut sleeve assembly (1/4") Tube insert Barbed fitting Cord assembly - motor Strain relief (2 used) Pressure release valve and mounting nut (included with #43) Screw 1/4” AB x 3/4” long (4 used) 18 September, 2000 TAB: 2.5 Horsepower - Single Cylinder F2520 (cont’d) KEY NO. 59 57 67 69 u TORQUE 7 to 10 Ft. Lbs. 7 to 10 Ft. Lbs. 100 to 120 In. Lbs. 80 to 100 In. Lbs. 42 to 48 In. Lbs. u Oil Free Repair Manual 19 September, 2000 TAB: 2.5 Horsepower - Single Cylinder F2520 (cont’d) KEY NO. • 55 • 56 57 + 58 + 59 * 60 61 PART NUMBER DAC-143 ----SSF-990 ACG-26 SSF-6640 ACG-45 ACG-402 * 62 * 63 * 64 65 66 67 / 68 / 69 • 74 / 75 + 76 • 77 SSG-8156 ----C-MO-3018-3 CAC-4086 SSF-3155 ----------------DAC-140 ----- DESCRIPTION Air Filter Intake muffler Screw 1/4"-20 x 1 1/4" (2 used, torque 7-10 Ft. Lbs.) Head Stud 1/4"-20 x 1 1/4" (2 used, torque 7-10 Ft. Lbs.) Gasket Valve plate assembly (includes valves, restrictors & screws) O-ring Connecting rod assembly Cylinder sleeve (position locating mark toward motor) Motor 2 HP Eccentric Flywheel Bearing Assy. Screw (eccentric, torque 50-60 In. Lbs.) Squirrel Cage Fan Screw #10-24 x 3/8" long (torque 30-35 In. Lbs.) Muffler screen Washer Flow Valve Air Filter Fastener NOT ILLUSTRATED H-7038 Air Hose 1/4" ID x 15' H-5797 Air Chuck SS-2707 Drain Valve MG2-OFTANK-4A General Manual Parts Manual MP2-F2520-1 * + • / Keys 60, 62, 63 and 64 can only be purchased as part of KK-4835 connecting rod kit.. Keys 58, 60, and 76 are purchased as part of KK-4987 Kit. Keys 55, 56, 74 and 77 can be purchased as part of KK-4977 Kit. Keys 68, 69, and 75 can be purchased as part of KK-5018 Fan Kit. Oil Free Repair Manual 20 September, 2000 TAB: 2.5 Horsepower - Single Cylinder