MAXIM MAX901BCSE

19-2887; Rev. 4; 7/01
High-Speed, Low-Power Voltage Comparators
Features
♦ 8ns (typ) Propagation Delay
♦ 18mW/Comparator Power Consumption (+5V, typ)
♦ Separate Analog and Digital Supplies
♦ Flexible Analog Supply: +5V to +10V or ±5V
♦ Input Range Includes Negative Supply Rail
♦ TTL-Compatible Outputs
♦ TTL-Compatible Latch Inputs (Except MAX901)
Ordering Information
PART
For newer, pin-for-pin compatible parts with the same
speed and only half the power dissipation, see the
MAX9201/MAX9202/MAX9203 data sheet.
Applications
High-Speed A/D
Converters
High-Speed V/F
Converters
Line Receivers
Threshold Detectors
Input Trigger Circuitry
High-Speed Data
Sampling
PWM Circuits
TEMP RANGE
PIN-PACKAGE
MAX900ACPP
0°C to +70°C
20 Plastic DIP
MAX900BCPP
0°C to +70°C
20 Plastic DIP
MAX900ACWP
0°C to +70°C
20 Wide SO
MAX900BCWP
0°C to +70°C
20 Wide SO
MAX900AEPP
-40°C to +85°C
20 Plastic DIP
MAX900BEPP
-40°C to +85°C
20 Plastic DIP
MAX900AEWP
-40°C to +85°C
20 Wide SO
MAX900BEWP
-40°C to +85°C
20 Wide SO
MAX901ACPE
0°C to +70°C
16 Plastic DIP
MAX901BCPE
0°C to +70°C
16 Plastic DIP
Ordering Information continued at end of data sheet.
Pin Configurations
TOP VIEW
MAX902
MAX901
IN- (A) 1
IN+ (A) 2
GND 3
OUT (A) 4
OUT (B) 5
16 IN- (D)
IN- (A) 1
14 VCC**
15 IN+ (D)
IN+ (A)
2
13 N.C.
GND
3
12 OUT (B)
14 VCC**
A
D
B
C
MAX903
13 OUT (D)
LATCH (A) 4
12 OUT (C)
OUT (A) 5
B
A
11 LATCH (B)
10 VDD***
11 VDD**
N.C. 6
9
IN+ (B)
IN+ (B) 7
10 IN+ (C)
VEE* 7
8
IN- (B)
IN- (B) 8
9
VEE* 6
IN- (C)
DIP/SO
DIP/SO
VCC** 1
8
VDD***
IN+
2
7
OUT
IN-
3
6
GND
VEE* 4
5
LATCH
DIP/SO
*ANALOG V- AND SUBSTRATE
**ANALOG V+
***DIGITAL V+
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX900–MAX903
General Description
The MAX900–MAX903 high-speed, low-power, single/
dual/quad voltage comparators feature differential analog inputs and TTL-logic outputs with active internal pullups. Fast propagation delay (8ns typ at 5mV overdrive)
makes the MAX900–MAX903 ideal for fast A/D converters and sampling circuits, line receivers, V/F converters,
and many other data-discrimination applications.
All comparators can be powered from separate analog
and digital power supplies or from a single combined supply voltage. The analog input common-mode range
includes the negative rail, allowing ground sensing when
powered from a single supply. The MAX900–MAX903
consume 18mW per comparator when powered from +5V.
The MAX900–MAX903 are equipped with independent
TTL-compatible latch inputs. The comparator output
states are held when the latch inputs are driven low. The
MAX901 provides the same performance as the
MAX900/MAX902/MAX903 with the exception of the
latches.
MAX900–MAX903
High-Speed, Low-Power Voltage Comparators
ABSOLUTE MAXIMUM RATINGS
Internal Power Dissipation................................................500mW
Derate above +100°C ................................................10mW/°C
Operating Temperature Ranges:
MAX900–MAX903_C_ _ .......................................0°C to +70°C
MAX900–MAX903_E_ _ ....................................-40°C to +85°C
Junction Temperature........................................-65°C to +160°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Analog Supply Voltage (VCC to VEE) ...................................+12V
Digital Supply Voltage (VDD to GND) ....................................+7V
Differential Input Voltage..................(VEE - 0.2V) to (VCC + 0.2V)
Common-Mode Input Voltage..........(VEE - 0.2V) to (VCC + 0.2V)
Latch-Input Voltage (MAX900/MAX902/
MAX903 only) .........................................-0.2V to (VDD + 0.2V)
Output Short-Circuit Duration
To GND.......................................................................Indefinite
To VDD ...............................................................................1min
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +5V, VEE = -5V, VDD = +5V, LE1–LE4 = logic high, TA = +25°C, unless otherwise noted.)
MAX900A/MAX901A
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
MAX900B/MAX901B/
MAX902/MAX903
MIN
TYP
MAX
UNITS
VOS
VCM = 0
VO = 1.4V
0.5
2.0
1.0
4.0
mV
IB
IIN+ or IIN-
3
6
4
10
µA
Input Offset Current
IOS
VCM = 0;
VO = 1.4V
50
250
100
500
nA
Input Voltage Range
VCM
(Note 1)
VCC 2.25
V
Input Offset Voltage
Input Bias Current
Common-Mode Rejection
Ratio
Power-Supply Rejection
Ratio
VCC 2.25
VEE - 0.1
VEE - 0.1
CMRR
-5V < VCM <
+2.75V,
VO = 1.4V
(Note 2)
50
150
75
250
µV/V
PSRR
(Note 2)
50
150
100
250
µV/V
Output High Voltage
VOH
VIN > 250mV,
ISRC = 1mA
Output Low Voltage
VOL
VIN > 250mV,
ISINK = 8mA
0.3
0.4
0.3
0.4
V
Latch-Input Voltage High
VLH
(Note 3)
1.4
2.0
1.4
2.0
V
Latch-Input Voltage Low
VLL
(Note 3)
Latch-Input Current High
ILH
VLH = 3.0V
(Note 3)
1
20
1
20
µA
Latch-Input Current Low
ILL
VLL = 0.3V
(Note 3)
1
20
1
20
µA
2
2.4
0.8
3.5
2.4
1.4
0.8
3.5
V
1.4
_______________________________________________________________________________________
V
High-Speed, Low-Power Voltage Comparators
(VCC = +5V, VEE = -5V, VDD = +5V, LE1–LE4 = logic high, TA = +25°C, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MAX900A/MAX901A
MAX900B/MAX901B
MIN
TYP
MAX
MAX902
MIN
MAX903
TYP
MAX
MIN
TYP
UNITS
MAX
Positive Analog
Supply Current
ICC
(Note 7)
10
15
5
8
2.5
4
mA
Negative Analog
Supply Current
IEE
(Note 7)
7
12
3.5
6
2
3
mA
Digital Supply
Current
IDD
(Note 7)
4
6
2
3
1
1.5
mA
Power
Dissipation
PD
VCC = VDD =
+5V, VEE = 0
70
105
35
55
18
28
mW
TIMING CHARACTERISTICS
(VCC = +5V, VEE = -5V, VDD = +5V, LE1–LE4 = logic high, TA = +25°C, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MAX900A/MAX901A
MAX900B/MAX901B
MIN
TYP
MAX
tpd+
VOD = 5mV,
CL = 15pF,
IO = 2mA
(Note 4)
8
Input-to-Output Low
Response Time
tpd-
VOD = 5mV,
CL = 15pF,
IO = 2mA
(Note 4)
Difference in
Response Time
Between Outputs
∆tpd
Latch Disable to
Output High Delay
Latch Disable to
Output Low Delay
MAX902
MAX903
UNITS
TYP
MAX
10
8
8
10
(Notes 4, 5)
0.5
2.0
tpd+ (D)
(Notes 3, 6)
10
10
10
ns
tpd- (D)
(Notes 3, 6)
12
12
12
ns
Minimum Setup Time
ts
(Notes 3, 6)
2
2
2
ns
Minimum Hold Time
th
(Notes 3, 6)
1
1
1
ns
Minimum Latch
Disable Pulse Width
tpw (D)
(Notes 3, 6)
10
10
10
ns
Input-to-Output High
Response Time
MIN
MIN
TYP
MAX
10
8
10
ns
8
10
8
10
ns
0.5
2.0
0.5
2.0
ns
_______________________________________________________________________________________
3
MAX900–MAX903
ELECTRICAL CHARACTERISTICS (continued)
MAX900–MAX903
High-Speed, Low-Power Voltage Comparators
ELECTRICAL CHARACTERISTICS
(VCC = +5V, VEE = -5V, VDD = +5V, LE1–LE4 = logic high, TA = full operating temperature, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MAX900A/MAX901A
MIN
TYP
MAX
MAX900B/MAX901B/
MAX902/MAX903
MIN
TYP
MAX
UNITS
VOS
VCM = 0,
VO = 1.4V
1
3
2
6
mV
IB
IIN+ or IIN-
4
10
6
15
µA
Input Offset Current
IOS
VCM = 0,
VO = 1.4V
100
500
200
800
nA
Input Voltage Range
VCM
(Note 1)
VCC 2.25
V
Input Offset Voltage
Input Bias Current
Common-Mode
Rejection Ratio
Power-Supply
Rejection Ratio
VEE 0.1
VCC 2.25
VEE 0.1
CMRR
-5V < VCM <
+2.75V,
VO = 1.4V
(Note 2)
80
250
120
500
µV/V
PSRR
(Note 2)
100
250
150
500
µV/V
Output High Voltage
VOH
VIN > 250mV,
ISRC = 1mA
Output Low Voltage
VOL
VIN > 250mV,
ISINK = 8mA
0.3
0.4
0.3
0.4
V
Latch Input Voltage
High
VLH
(Note 7)
1.4
2.0
1.4
2.0
V
Latch Input Voltage
Low
VLL
(Note 7)
Latch Input Current
High
ILH
VLH = 3.0V
(Note 7)
2
20
1
20
µA
Latch Input Current
Low
ILL
VLL = 0.3V
(Note 7)
2
20
1
20
µA
4
2.4
0.8
3.5
2.4
1.4
0.8
3.5
V
1.4
V
_______________________________________________________________________________________
High-Speed, Low-Power Voltage Comparators
(VCC = +5V, VEE = -5V, VDD = +5V, LE1–LE4 = logic high, TA = full operating temperature, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MAX900A/MAX901A/
MAX900B/MAX901B
MIN
TYP
MAX
MAX902
MAX903
UNITS
MIN
TYP
MAX
MIN
TYP
MAX
Positive Analog
Supply Current
ICC
(Note 7)
10
25
5
12
2.5
6
mA
Negative Analog
Supply Current
IEE
(Note 7)
7
20
3.5
10
2
5
mA
Digital Supply
Current
IDD
(Note 7)
4
10
2
5
1
2.5
mA
Power
Dissipation
PD
VCC = VDD =
+5V, VEE = 0
70
105
35
55
18
28
mW
TIMING CHARACTERISTICS
(VCC = +5V, VEE = -5V, VDD = +5V, LE1–LE4 = logic high, TA = full operating temperature, unless otherwise noted.)
PARAMETER
MAX900A/MAX901A
SYMBOL
CONDITIONS
TYP
MAX
tpd+
VOD = 5mV,
CL = 15pF,
IO = 2mA
(Note 4)
10
Input-to-Output Low
Response Time
tpd-
VOD = 5mV,
CL = 15pF,
IO = 2mA
(Note 4)
Difference in Response
Time Between Outputs
∆tpd
(Notes 4, 5)
MIN
Input-to-Output High
Response Time
MAX900B/MAX901B/
MAX902/MAX903
MIN
UNITS
TYP
MAX
15
10
15
ns
10
15
10
15
ns
1
3
1
3
ns
Note 1: The input common-mode voltage and input signal voltages should not be allowed to go negative by more than 0.2V below
VEE. The upper-end of the common-mode voltage range is typically VCC - 2V, but either or both inputs can go to a maximum
of VCC + 0.2V without damage.
Note 2: Tested for +4.75V < VCC < +5.25V, and -5.25V < VEE < -4.75V with VDD = +5V, although permissible analog power-supply
range is +4.75V < VCC < +10.5V for single-supply operation with VEE grounded.
Note 3: Specification does not apply to MAX901.
Note 4: Guaranteed by design. Times are for 100mV step inputs (see Propagation Delay Characteristics in Figures 2 and 3).
Note 5: Maximum difference in propagation delay between any of the four comparators in the MAX900–MAX903.
Note 6: See Timing Diagram (Figure 2). Owing to the difficult and critical nature of switching measurements involving the latch,
these parameters cannot be tested in a production environment. Typical specifications listed are taken from measurements
using a high-speed test-jig.
Note 7: ICC tested for +4.75V < VCC < +10.5V with VEE grounded. IEE tested for -5.25V < VEE < -4.75V with VCC = +5V. IDD tested
for +4.75V < VDD < +5.25V with the worst-case condition of all four comparator outputs at logic low.
_______________________________________________________________________________________
5
MAX900–MAX903
ELECTRICAL CHARACTERISTICS (continued)
Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
INPUT BIAS CURRENT
vs. TEMPERATURE
0
-1
-2
3.5
3.0
2.5
20 40 60 80 100 120
TA = -55°C
0.4
0.3
0.2
TA = +25°C
0.1
-40 -20 0
TA = +125°C
20 40 60 80 100 120
2
4
6
8
10
ICC SUPPLY CURRENT (PER COMPARATOR)
vs. VCC SUPPLY VOLTAGE
IINPUT OVERDRIVE vs.
tpd+ RESPONSE TIME
INPUT OVERDRIVE vs.
tpd- RESPONSE TIME
TA = +125°C
2.8
TA = +25°C
3
0
INPUT VOLTAGE
1
2.2
TA = -55°C
1.8
1.6
4
5
6
7
8
9
2mV
2
2.4
2.0
25mV
5mV
100
INPUT OVERDRIVE (VOD)
0
-100
10
2mV
3
25mV
0
1
0
100
INPUT OVERDRIVE (VOD)
0
2
4
6
8
10
12
14
0
2
tpd+ RESPONSE TIME (ns)
RESPONSE TIME vs.
TEMPERATURE (5mV OVERDRIVE)
12
4
6
8
10
12
14
tpd- RESPONSE TIME (ns)
RESPONSE TIME vs. LOAD CAPACITANCE
(5mV OVERDRIVE)
MAX900-03 toc07
14
13
5mV
2
-100
VCC SUPPLY VOLTAGE (V)
RESPONSE TIME (ns)
4
14
MAX900-03 toc08
2.6
4
INPUT VOLTAGE OUTPUT VOLTAGE
VDD = +5V
MAX900-03 toc06
LOAD CURRENT (mA)
MAX900-03 toc05
TEMPERATURE (°C)
OUTPUT VOLTAGE
TEMPERATURE (°C)
MAX900-03 toc04
3.0
0.5
2.0
-40 -20 0
MAX900-03 toc03
4.0
OUTPUT LOW VOLTAGE (V)
1
OUTPUT LOW VOLTAGE
(VOL) vs. LOAD CURRENT
MAX900-03 toc02
2
INPUT BIAS VOLTAGE (µV)
MAX900-03 toc01
INPUT OFFSET VOLTAGE (mV)
INPUT OFFSET VOLTAGE
vs. TEMPERATURE
ICC SUPPLY CURRENT (mA)
MAX900–MAX903
High-Speed, Low-Power Voltage Comparators
RL = 2.4kΩ
13
12
11
tpd+
10
11
9
10
8
9
7
8
tpd-
6
tpdtpd+
7
5
-40 -20
0
20 40 60 80 100 120
TEMPERATURE (°C)
6
10
20
30
40
50
60
70
80
LOAD CAPACITANCE (pF)
____________________________________________________________________________________________________
High-Speed, Low-Power Voltage Comparators
MAX900
PIN
MAX901
NAME
FUNCTION
PIN
NAME
FUNCTION
1, 8, 9, 16
IN- (A, B, C, D)
Negative Input
(Channels A, B, C, D)
2, 7, 10, 15
IN+ (A, B, C, D)
Positive Input
(Channels A, B, C, D)
3
GND
1, 10, 11, 20
IN- (A, B, C, D)
Negative Input
(Channels A, B, C, D)
2, 9, 12, 19
IN+ (A, B, C, D)
Positive Input
(Channels A, B, C, D)
3
GND
4, 7, 14, 17
LATCH (A, B, C,
D)
Latch Input (Channels
A, B, C, D)
4, 5, 12, 13
OUT (A, B, C, D)
Output (Channels A,
B, C, D)
5, 6, 15, 16
OUT (A, B, C, D)
Output (Channels A, B,
C, D)
6
VEE
Negative Analog
Supply and Substrate
8
VEE
Negative Analog
Supply and Substrate
11
VDD
Positive Digital Supply
13
VDD
Positive Digital Supply
14
VCC
Positive Analog
Supply
18
VCC
Positive Analog Supply
Ground Terminal
Ground Terminal
MAX903
MAX902
PIN
NAME
FUNCTION
1, 8
IN- (A, B)
Negative Input
(Channels A, B)
2, 9
IN+ (A, B)
Positive Input
(Channels A, B)
3
GND
Ground Terminal
4, 11
LATCH (A, B)
5, 12
OUT (A, B)
6, 13
PIN
NAME
FUNCTION
1
VCC
Positive Analog Supply
2
IN+
Positive Input
3
IN-
Negative Input
4
VEE
Latch Input (Channels
A, B)
Negative Analog
Supply and Substrate
5
LATCH
Output (Channels A, B)
6
GND
Ground Terminal
N.C.
No Connection. Not
internally connected.
7
OUT
Output
VDD
Positive Digital Supply
VEE
Negative Analog
Supply and Substrate
8
7
10
VDD
Positive Digital Supply
14
VCC
Positive Analog Supply
Latch Input
_______________________________________________________________________________________
7
MAX900–MAX903
Pin Descriptions
MAX900–MAX903
High-Speed, Low-Power Voltage Comparators
Applications Information
pushes the output through the transition region cleanly,
but applies a hysteresis in threshold seen at the input
terminals.
Circuit Layout
Because of the large gain-bandwidth transfer function of
the MAX900–MAX903, special precautions must be
taken to realize their full high-speed capability. A printed
circuit board with a good, low-inductance ground plane
is mandatory. All decoupling capacitors (the small
100nF ceramic type is a good choice) should be mounted as close as possible to the power-supply pins.
Separate decoupling capacitors for analog VCC and for
digital V DD are also recommended. Close attention
should be paid to the bandwidth of the decoupling and
terminating components. Short lead lengths on the
inputs and outputs are essential to avoid unwanted parasitic feedback around the comparators. Solder the
device directly to the printed circuit board instead of
using a socket.
TTL Output and Latch Inputs
The comparator TTL-output stages are optimized for driving low-power Schottky TTL with a fan-out of four.
When the latch is connected to a logic high level or left
floating, the comparator is transparent and immediately
responds to changes at the input terminals. When the
latch is connected to a TTL low level, the comparator
output latches in the same state as at the instant that the
latch command is applied, and will not respond to subsequent changes at the input. No latch is provided on
the MAX901.
Power Supplies
The MAX900–MAX903 can be powered from separate
analog and digital supplies or from a single +5V supply.
The analog supply can range from +5V to +10V with
VEE grounded for single-supply operation (Figures 1A
and 1B) or from a split ±5V supply (Figure 1C). The VDD
digital supply always requires +5V.
In high-speed, mixed-signal applications where a common ground is shared, a noisy digital environment can
adversely affect the analog input signal. When set up
with separate supplies (Figure 1C), the
MAX900–MAX903 isolate analog and digital signals by
providing a separate AGND (VEE) and DGND.
Input Slew-Rate Requirements
As with all high-speed comparators, the high gain-bandwidth product of the MAX900–MAX903 can create oscillation problems when the input traverses the linear
region. For clean output switching without oscillation or
steps in the output waveform, the input must meet minimum slew-rate requirements. Oscillation is largely a
function of board layout and of coupled source impedance and stray input capacitance. Both poor layout and
large-source impedance will cause the part to oscillate
and increase the minimum slew-rate requirement. In
some applications, it may be helpful to apply some positive feedback between the output and + input. This
Typical Power-Supply Alternatives
+5V
+10V
+5V
+5V
+5V
VCC
VCC
VCC
VDD
VEE
VDD
VDD
OUT
OUT
GND
OUT
GND
VEE
GND
VEE
-5V
Figure 1A. Separate Analog Supply,
Common Ground
8
Figure 1B. Single +5V Supply, Common
Ground
Figure 1C. Split ±5V Supply, Separate
Ground
_______________________________________________________________________________________
High-Speed, Low-Power Voltage Comparators
VOS
Input Offset Voltage: Voltage applied
between the two input terminals to obtain
TTL-logic threshold (+1.4V) at the
output.
tpd+ (D)
Latch Disable-to-Output High Delay:
The propagation delay measured from
the latch-signal crossing the TTL
threshold in a low-to-high transition to
the point of the output crossing TTL
threshold in a low-to-high transition.
VIN
Input Voltage Pulse Amplitude: Usually
set to 100mV for comparator
specifications.
tpd- (D)
Latch Disable-to-Output Low Delay:
The propagation delay measured from
the latch-signal crossing the TTL
threshold in a low-to-high transition to
the point of the output crossing TTL
threshold in a high-to-low transition.
VOD
Input Voltage Overdrive: Usually set to
5mV and in opposite polarity to VIN for
comparator specifications.
ts
Minimum Setup Time: The minimum
time before the negative transition of the
latch signal that an input signal change
must be present in order to be acquired
and held at the outputs.
tpd+
Input-to-Output High Delay: The
propagation delay measured from the
time the input signal crosses the input
offset voltage to the TTL-logic threshold
of an output low-to-high transition
th
Minimum Hold Time: The minimum time
after the negative transition of the latch
signal that an input signal must remain
unchanged in order to be acquired and
held at the output.
tpd-
Input-to-Output Low Delay: The
propagation delay measured from the
time the input signal crosses the input
offset voltage to the TTL-logic threshold
of an output high-to-low transition.
tpw (D)
Minimum Latch-Disable Pulse Width:
The minimum time that the latch signal
must remain high in order to acquire and
hold an input-signal change.
_______________________________________________________________________________________
9
MAX900–MAX903
Definitions of Terms
MAX900–MAX903
High-Speed, Low-Power Voltage Comparators
COMPARE
LATCH
ENABLE
INPUT
COMPARE
1.4V
LATCH
LATCH
DIFFERENTAL
INPUT VOLTAGE
VIN
ts
+5V
LATCH
tpw(D)
th
0
OUTPUT
VOS
+5mV
VDD
VOS
INPUT
100mV
5ns/div
tpd+ (D)
tpd-
Figure 3. tpd+ Response Time to 5mV Overdrive
1.4V
COMPARATOR
OUTPUT
Figure 2. MAX900/MAX902/MAX903 Timing Diagram
VCC +5V
+5V
VDD +5V
INPUT TO 10X
SCOPE PROBE
(10MΩ, 14pF)
OUTPUT
PRECISION
STEP GENERATOR
0
100nF
10Ω
RL
2.43kΩ
1kΩ
D.U.T.
100mV
INPUT
10kΩ
VDC
OFFSET
ADJUST
100nF
OUTPUT TO 10X
SCOPE PROBE
(10MΩ, 14pF)
100nF
VOS
+5mV
10Ω
100nF
VEE -5V
5ns/div
Figure 4. tpd- Response Time to 5mV Overdrive
10
Figure 5. Response-Time Setup
______________________________________________________________________________________
High-Speed, Low-Power Voltage Comparators
MAX900–MAX903
OUTPUT
1V/div
OUTPUT
1V/div
INPUT
10mV/div
INPUT
10mV/div
5ns/div
5ns/div
Figure 6. Response to 50MHz Sine Wave
Figure 7. Response to 100MHz Sine Wave Photo
+1.25V
VREF
Typical Application
IN1
MX7228
UNDER
LIMIT
VOUT1
VDAC1
OCTAL
8-BIT
DAC
OVER
LIMIT
IN2
IN3
UNDER
LIMIT
IN4
UNDER
LIMIT
MAX901
MSB
D7
8-BIT
DATA
INPUT
Programmed, Variable-Alarm Limits
By combining two quad analog comparators with an
octal 8-bit D/A converter (the MX7228), several alarm
and limit-defect functions can be performed simultaneously without external adjustments
The MX7228’s internal latches allow the system
processor to set the limit points for each comparator
independently and update them at any time. Set the
upper and lower thresholds for a single transducer by
pairing the D/A converter and comparator sections.
8x8
DATA
LATCH
IN5
UNDER
LIMIT
LSB
D1
IN6
UNDER
LIMIT
OVER
LIMIT
IN7
A0
A1
CONTROL
LOGIC
VDAC8
VOUT8
OVER
LIMIT
A2
IN8
MAX901
Figure 8. Alarm Circuit Level Monitors Eight Separate Inputs
______________________________________________________________________________________
11
MAX900–MAX903
High-Speed, Low-Power Voltage Comparators
Ordering Information (continued)
PART
TEMP RANGE
Pin Configurations (continued)
PIN-PACKAGE
TOP VIEW
MAX901ACSE
0°C to +70°C
16 Narrow SO
MAX901BCSE
0°C to +70°C
16 Narrow SO
MAX901AEPE
-40°C to +85°C
16 Plastic DIP
MAX901BEPE
-40°C to +85°C
IN- (A) 1
20 IN- (D)
IN+ (A) 2
19 IN+ (D)
GND 3
16 Plastic DIP
LATCH (A) 4
OUT (A) 5
MAX901AESE
-40°C to +85°C
16 Narrow SO
MAX901BESE
-40°C to +85°C
16 Narrow SO
MAX902CPD
0°C to +70°C
14 Plastic DIP
MAX902CSD
0°C to +70°C
MAX902EPD
18 VCC**
A
17 LATCH (D)
16 OUT (D)
MAX900
OUT (B) 6
LATCH (B) 7
D
B
15 OUT (C)
C
14 LATCH (C)
VEE* 8
13 VDD***
14 Narrow SO
IN+ (B) 9
12 IN+ (C)
-40°C to +85°C
14 Plastic DIP
IN- (B) 10
11 IN- (C)
MAX902ESD
-40°C to +85°C
14 Narrow SO
MAX903CPA
0°C to +70°C
8 Plastic DIP
MAX903CSA
0°C to +70°C
8 SO
MAX903EPA
-40°C to +85°C
8 Plastic DIP
MAX903ESA
-40°C to +85°C
8 SO
DIP/SO
*ANALOG V- AND SUBSTRATE
**ANALOG V+
***DIGITAL V+
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2001 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.