AD AD8613_10

Low Cost Micropower, Low Noise CMOS
Rail-to-Rail, Input/Output Operational Amplifiers
AD8613/AD8617/AD8619
Battery-powered instrumentation
Multipole filters
Current shunt sense
Sensors
ADC predrivers
DAC drivers/level shifters
Low power ASIC input or output amplifiers
GENERAL DESCRIPTION
The AD8613/AD8617/AD8619 are single, dual, and quad micropower, rail-to-rail input and output amplifiers that feature low
supply current, as well as low input voltage and current noise.
The parts are fully specified to operate from 1.8 V to 5 V single
supply, or ±0.9 V and ±2.5 V dual supply. The combination of low
noise, very low input bias currents, and low power consumption
make the AD8613/AD8617/AD8619 especially useful in
portable and loop-powered instrumentation.
The ability to swing rail-to-rail at both the input and output
enables designers to buffer CMOS ADCs, DACs, ASICs, and
other wide output swing devices in low power, single-supply
systems.
1
AD8613
V–
2
+IN
3
TOP VIEW
(Not to Scale)
V+
4
–IN
OUT A 1
–IN A 2
AD8617
+IN A 3
TOP VIEW
(Not to Scale)
V– 4
8
V+
7
OUT B
6
–IN B
5
+IN B
05622-001
Figure 1. 5-Lead SC70 and 5-Lead TSOT-23
Figure 2. 8-Lead MSOP and 8-Lead SOIC_N
OUT A 1
8 V+
AD8617
–IN A 2
7 OUT B
TOP VIEW
(Not to Scale)
+IN A 3
6 –IN B
5 +IN B
V– 4
NOTES
1. PIN 4 AND THE EXPOSED PAD
MUST BE CONNECTED TO V–.
Figure 3. 8-Lead LFCSP_VD
OUT A
1
14 OUT D
–IN A
2
13
+IN A
3
AD8619
V+
4
TOP VIEW
(Not to Scale)
+IN B
5
10
+IN C
–IN B
6
9
–IN C
OUT B
7
8
OUT C
–IN D
12 +IN D
11 V–
Figure 4. 14-Lead TSSOP
OUT A 1
14 OUT D
–IN A 2
+IN A 3
V+ 4
+IN B 5
The AD8613 is available in a 5-lead SC70 package and a 5-lead
TSOT-23 package. The AD8617 is available in 8-lead MSOP,
8-lead SOIC, and 8-lead LFCSP packages. The AD8619 is available
in 14-lead TSSOP and 14-lead SOIC packages. The AD8617W
is qualified for automotive applications and is available in an
8-lead MSOP package and an 8-lead SOIC package.
5
05622-037
OUT
05622-022
APPLICATIONS
PIN CONFIGURATIONS
05622-035
Offset voltage: 2.2 mV maximum
Low input bias current: 1 pA maximum
Single-supply operation: 1.8 V to 5 V
Low noise: 22 nV/√Hz
Micropower: 50 μA/amplifier maximum over temperature
No phase reversal
Unity gain stable
Qualified for automotive applications
13
AD8619
–IN D
12 +IN D
TOP VIEW
11 V–
(Not to Scale)
10 +IN C
–IN B 6
9
–IN C
OUT B 7
8
OUT C
05622-036
FEATURES
Figure 5. 14-Lead SOIC_N
Rev. E
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2005–2010 Analog Devices, Inc. All rights reserved.
AD8613/AD8617/AD8619
TABLE OF CONTENTS
Features .............................................................................................. 1 Thermal Resistance .......................................................................5 Applications ....................................................................................... 1 ESD Caution...................................................................................5 General Description ......................................................................... 1 Typical Performance Characteristics ..............................................6 Pin Configurations ........................................................................... 1 Outline Dimensions ....................................................................... 12 Revision History ............................................................................... 2 Ordering Guide .......................................................................... 15 Specifications..................................................................................... 3 Absolute Maximum Ratings............................................................ 5 REVISION HISTORY
3/10—Rev. D to Rev. E
Changes to General Description .................................................... 1
Changes to Ordering Guide .......................................................... 15
3/10—Rev. C to Rev. D
Changes to General Description .................................................... 1
Changes to Ordering Guide .......................................................... 15
10/09—Rev. B to Rev. C
Added 8-Lead LFCSP Package .......................................... Universal
Changes to Features Section, Figure 2 Caption, General
Description Section, and Figure 3 .................................................. 1
Changed VS to VSY Throughout ...................................................... 3
Changes to Input Characteristics, Input Voltage Range
Parameter; Dynamic Performance, Settling Time to 0.1% and
Phase Margin Parameters; and Noise Performance, Peak-toPeak Noise Parameter, Table 1 ........................................................ 3
Changes to Input Characteristics, Input Voltage Range
Parameter; Dynamic Performance, Settling Time to 0.1% and
Phase Margin Parameters; and Noise Performance, Peak-toPeak Noise Parameter, Table 2 ........................................................ 4
Changes to Table 3 and Table 4 ....................................................... 5
Changes to Figure 12 to Figure 15 .................................................. 7
Changes to Figure 18 Caption......................................................... 8
Changes to Figure 30 and Figure 31 ............................................. 10
Updated Outline Dimensions ....................................................... 12
Added Figure 44; Renumbered Sequentially .............................. 14
Changes to Ordering Guide .......................................................... 15
1/06—Rev. A to Rev. B
Added AD8613 ................................................................... Universal
Changes to Features ..........................................................................1
Changes to Table 1.............................................................................3
Changes to Table 2.............................................................................4
Updated Outline Dimensions ....................................................... 12
Changes to Ordering Guide .......................................................... 13
10/05—Rev. 0 to Rev. A
Added AD8619 ................................................................... Universal
Change to Specifications Section ....................................................3
Updated Outline Dimensions ....................................................... 12
Changes to Ordering Guide .......................................................... 13
9/05—Revision 0: Initial Version
Rev. E | Page 2 of 16
AD8613/AD8617/AD8619
SPECIFICATIONS
Electrical characteristics at VSY = 5 V, VCM = VSY/2, TA = 25°C, unless otherwise noted.
Table 1.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Conditions
VOS
Offset Voltage Drift
AD8613
Input Bias Current
∆VOS/∆T
−0.3 V < VCM < +5.3 V
−40°C < TA < +125°C, −0.3 V < VCM < +5.2 V
−40°C < TA < +125°C
Min
Typ
Max
Unit
0.4
2.2
2.2
4.5
7.0
1
110
780
0.5
50
250
5
mV
mV
μV/°C
μV/°C
pA
pA
pA
pA
pA
pA
V
dB
dB
V/mV
pF
pF
1
2.5
0.2
IB
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Offset Current
IOS
0.1
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Voltage Range
Common-Mode Rejection Ratio
IVR
CMRR
Large Signal Voltage Gain
Input Capacitance
AVO
CDIFF
CCM
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Settling Time to 0.1%
Gain Bandwidth Product
Phase Margin
NOISE PERFORMANCE
Peak-to-Peak Noise
Voltage Noise Density
Current Noise Density
VOH
VOL
ISC
ZOUT
PSRR
ISY
SR
tS
GBP
ØM
en p-p
en
in
0
0 V < VCM < 5 V
−40°C < TA < +125°C
RL = 10 kΩ, 0.5 V < VO < 4.5 V
IL = 1 mA
−40°C to +125°C
IL = 10 mA
−40°C to +125°C
IL = 1 mA
−40°C to +125°C
IL = 10 mA
−40°C to +125°C
95
68
235
4.95
4.9
4.98
4.7
4.50
20
190
67
64
94
38
50
RL = 10 kΩ
G = ±1, VIN = 2 V step, CL = 20 pF, RL = 1 kΩ
RL = 100 kΩ
RL = 10 kΩ
RL = 10 kΩ, RL = 100 kΩ, CL = 20 pF
0.1
23
400
350
70
0.1 Hz to 10 Hz
f = 1 kHz
f = 10 kHz
f = 1 kHz
2.3
25
22
0.05
Rev. E | Page 3 of 16
30
50
275
335
±80
15
f = 10 kHz, AV = 1
1.8 V < VSY < 5 V
−40°C < TA < +125°C
VO = VSY/2
−40°C <TA < +125°C
500
1.9
2.5
V
V
V
V
mV
mV
mV
mV
mA
Ω
dB
dB
μA
μA
V/μs
μs
kHz
kHz
Degrees
3.5
μV
nV/√Hz
nV/√Hz
pA/√Hz
AD8613/AD8617/AD8619
Electrical characteristics at VSY = 1.8 V, VCM = VSY/2, TA = 25°C, unless otherwise noted.
Table 2.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Conditions
VOS
Offset Voltage Drift
AD8613
Input Bias Current
∆VOS/∆T
−0.3 V < VCM < +1.9 V
−0.3 V < VCM < +1.8 V; −40°C < TA < +125°C
−40°C < TA < +125°C
Min
Typ
Max
Unit
0.4
2.2
2.2
8.5
9.0
1
110
780
0.5
50
250
1.8
mV
mV
μV/°C
μV/°C
pA
pA
pA
pA
pA
pA
V
dB
dB
V/mV
pF
pF
1
3.7
0.2
IB
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Offset Current
IOS
0.1
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Voltage Range
Common-Mode Rejection Ratio
IVR
CMRR
Large Signal Voltage Gain
Input Capacitance
AVO
CDIFF
CCM
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Settling Time to 0.1%
Gain Bandwidth Product
Phase Margin
NOISE PERFORMANCE
Peak-to-Peak Noise
Voltage Noise Density
Current Noise Density
0 V < VCM < 1.8 V
−40°C < TA < +125°C
RL = 10 kΩ, 0.5 V < VO < 1.3 V
0
58
55
85
VOH
IL = 1 mA
−40°C to +125°C
1.65
1.6
VOL
IL = 1 mA
−40°C to +125°C
ISC
ZOUT
PSRR
ISY
SR
tS
GBP
ØM
en p-p
en
in
1000
2.1
3.8
1.73
44
67
60
80
94
38
50
RL = 10 kΩ
G = ±1, VIN = 1 V step, CL = 20 pF, RL = 1 kΩ
RL = 100 kΩ
RL = 10 kΩ
RL = 10 kΩ, RL = 100 kΩ, CL = 20 pF
0.1
6.5
400
350
70
0.1 Hz to 10 Hz
f = 1 kHz
f = 10 kHz
f = 1 kHz
2.3
25
22
0.05
Rev. E | Page 4 of 16
V
V
±7
15
f = 10 kHz, AV = 1
1.8 V < VS < 5 V
VO = VSY/2
−40°C <TA < +125°C
86
mV
mV
mA
Ω
dB
μA
μA
V/μs
μs
kHz
kHz
Degrees
3.5
μV
nV/√Hz
nV/√Hz
pA/√Hz
AD8613/AD8617/AD8619
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
THERMAL RESISTANCE
Table 3.
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Parameter
Supply Voltage
Input Voltage
Input Current
Differential Input Voltage
Output Short-Circuit Duration to GND
Storage Temperature Range
Lead Temperature (Soldering, 60 sec)
Operating Temperature Range
Junction Temperature Range
Rating
6V
VSS − 0.3 V to VDD + 0.3 V
±10 mA
±6 V
Indefinite
−65°C to +150°C
300°C
−40°C to +125°C
−65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Table 4. Thermal Characteristics
Package Type
5-Lead TSOT-23 (UJ-5)
5-Lead SC70 (KS-5)
8-Lead MSOP (RM-8)
8-Lead SOIC_N (R-8)
8-Lead LFCSP_VD (CP-8-9)
14-Lead SOIC_N (R-14)
14-Lead TSSOP (RU-14)
ESD CAUTION
Rev. E | Page 5 of 16
θJA
207
376
210
158
81
120
180
θJC
61
126
45
43
20
36
35
Unit
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
AD8613/AD8617/AD8619
TYPICAL PERFORMANCE CHARACTERISTICS
VSY = 5 V or ±2.5 V, unless otherwise noted.
1800
400
VSY = 5V AND 1.8V
350
1400
INPUT BIAS CURRENT (pA)
1200
1000
800
600
400
200
150
100
0
25
1900
1600
1300
1000
700
400
100
–200
–500
–800
–1100
–1400
–1700
–2000
0
250
50
05622-003
200
300
05622-006
NUMBER OF AMPLIFIERS
VSY = 5.5V
–0.5V < V
< +5.5V
1600 T = 25°CCM
A
50
75
100
150
125
TEMPERATURE (°C)
INPUT OFFSET VOLTAGE (µV)
Figure 9. Input Bias Current vs. Temperature
Figure 6. Input Offset Voltage Distribution
50
40
–40°C < TA < 125°C
VCM = 2.5V
35
TA = 25°C
SUPPLY CURRENT (µA)
NUMBER OF AMPLIFIERS
40
30
25
20
15
10
30
20
05622-004
0
0
1
2
3
4
5
6
7
8
9
05622-007
10
5
0
1
0
10
Figure 7. Input Offset Voltage Drift Distribution
50
SUPPLY CURRENT/AMPLIFIER (μA)
INPUT OFFSET VOLTAGE (µV)
1500
1000
500
0
–500
–1000
05622-005
–1500
0.5
1.0
1.5
2.0
2.5
3.0
5
Figure 10. Supply Current vs. Supply Voltage
VSY = 5V
TA = 25°C
0
3
3.5
4.0
4.5
5.0
VSY = ±2.5V, ±1.35V, ±0.9V
40
30
20
10
0
–40
5.5
05622-008
2000
–2000
–0.5
2
SUPPLY VOLTAGE (V)
TCVOS (µV/°C)
–10
20
50
80
TEMPERATURE (°C)
INPUT COMMON MODE VOLTAGE (V)
Figure 8. Input Offset Voltage vs. Input Common-Mode Voltage
Figure 11. Supply Current vs. Temperature
Rev. E | Page 6 of 16
110
AD8613/AD8617/AD8619
135
60
VSY = 5V
TA = 25ºC
50
OPEN-LOOP GAIN (dB)
SOURCE
10
1
SINK
30
0.01
0.001
0.01
45
20
ΦM
10
0
0
VOL
0.1
90
40
0.1
VSY = ±2.5V AND ±0.9V
RL = 100kΩ
CL = 20pF
–10
–20
1k
10
1
10k
LOAD CURRENT (mA)
120
VSY = 5V AND 2.7V
TA = 25°C
100
30
VSY – VOH @ 1mA
CMRR (dB)
80
20
VOL @ 1mA
60
40
10
–25
–10
5
20
35
50
65
80
95
110
0
100
125
05622-013
20
05622-010
OUTPUT VOLTAGE TO SUPPLY RAIL (mV)
Figure 15. Open-Loop Gain and Phase vs. Frequency
VSY = 5V
0
–40
1k
Figure 13. Output Voltage to Supply Rail vs. Temperature
(IL = 1 mA)
350
10k
100k
1M
FREQUENCY (Hz)
TEMPERATURE (°C)
Figure 16. CMRR vs. Frequency
120
VSY = 5V
VSY = ±2.5V AND ±1.35V
TA = 25°C
300
100
VSY – VOH @ 10mA
250
PSRR (dB)
80
200
VOL @ 10mA
150
60
40
100
0
–40
–25
–10
5
20
35
50
65
80
95
110
0
100
125
05622-014
20
50
05622-011
OUTPUT VOLTAGE TO SUPPLY RAIL (mV)
–45
1M
100k
FREQUENCY (Hz)
Figure 12. Output Voltage to Supply Rail vs. Load Current
40
PHASE (Degrees)
VSY – VOH
1k
10k
100k
FREQUENCY (Hz)
TEMPERATURE (°C)
Figure 14. Output Voltage to Supply Rail vs. Temperature
(IL = 10 mA)
Figure 17. PSRR vs. Frequency
Rev. E | Page 7 of 16
1M
05622-012
100
05622-009
OUTPUT VOLTAGE TO SUPPLY RAIL (mV)
1k
AD8613/AD8617/AD8619
1k
VSY = 5V
AV = 1
RL = 10kΩ
CL = 200pF
VOLTAGE (1V/DIV)
100
AV = 10
AV = 1
10
VSY = 5V AND 1.8V
0
100
1k
10k
100k
05622-018
1
05622-015
OUTPUT IMPEDANCE (Ω)
AV = 100
TIME (20µs/DIV)
1M
FREQUENCY (Hz)
Figure 18. Output Impedance vs. Frequency
Figure 21. Large Signal Transient Response
50
0
VOUT (V)
SMALL SIGNAL OVERSHOOT (%)
VSY = 5V
45 TA = 25°C
40
35
VSY = ±2.5V
AV = –50
–2.5
30
–OS
25
20
VIN (mV)
100
15
+OS
0
05622-016
5
0
10
100
05622-019
10
TIME (20µs/DIV)
1000
LOAD CAPACITANCE (pF)
Figure 19. Small Signal Overshoot vs. Load Capacitance
Figure 22. Positive Overload Recovery
VSY = 5V, 2.7V, 1.8V
AV = 1
RL = 10kΩ
CL = 200pF
VSY = ±2.5V
AV = –50
VOLTAGE (50mV/DIV)
VOUT (V)
2.5
0
VIN (mV)
0
TIME (4µs/DIV)
05622-020
05622-017
–100
TIME (20µs/DIV)
Figure 20. Small Signal Transient Response
Figure 23. Negative Overload Recovery
Rev. E | Page 8 of 16
AD8613/AD8617/AD8619
1000
VIN
VOLTAGE (1V/DIV)
VOUT
05622-021
VSY = ±2.5V
AV = 1
RL = 10kΩ
VIN = 6V p-p
100
10
1/F CORNER @ 100Hz
05622-023
INPUT VOLTAGE NOISE (nV/ Hz)
VSY = 5V
TA = 25ºC
1
TIME (20ms/DIV)
1
10
100
1000
10000
FREQUENCY (Hz)
Figure 24. No Phase Reversal
Figure 26. Voltage Noise Density
140
VSY = 5V AND 2.7V
VSY = 5V
05622-022
CHANNEL SEPARATION (dB)
VOLTAGE NOISE (1µV/DIV)
120
100
80
60
40
0
100
TIME (1s/DIV)
05622-024
20
1k
10k
100k
FREQUENCY (Hz)
Figure 25. 0.1 Hz to 10 Hz Input Voltage Noise
Figure 27. Channel Separation
Rev. E | Page 9 of 16
1M
AD8613/AD8617/AD8619
VSY = 1.8 V or ±0.9 V, unless otherwise noted.
80
NUMBER OF AMPLIFIERS
400
OUTPUT VOLTAGE TO SUPPLY RAIL (mV)
VSY = 1.8V
0V < VCM < 1.8V
TA = 25°C
350
300
250
200
150
05622-025
100
50
60
VSY–VOH @ 1mA
40
VOH @ 1mA
20
0
–40
1900
1600
1300
1000
700
400
100
–200
–500
–800
–1100
–1400
–1700
–2000
0
VSY = 1.8V
05622-028
450
–25
–10
5
20
35
50
65
80
95
110
125
TEMPERATURE (°C)
INPUT OFFSET VOLTAGE (µV)
Figure 28. Input Offset Voltage Distribution
Figure 31. Output Voltage to Supply Rail vs. Temperature
(IL = 1 mA)
2000
VSY = 1.8V
TA = 25°C
80
1000
500
CMRR (dB)
0
–500
60
40
–1000
20
–2000
–0.5
05622-026
–1500
–0.2
0.1
0.4
0.7
1.0
1.3
1.6
1.9
0
100
2.2
05622-029
INPUT OFFSET VOLTAGE (µV)
1500
100
VSY = 1.8V
TA = 25°C
1k
10k
Figure 29. Input Offset Voltage vs. Input Common-Mode Voltage
1M
Figure 32. CMRR vs. Frequency
1000
120
VSY = 1.8V
TA = 25°C
VSY = 1.8V
TA = 25°C
100
100
VSY–VOH
80
SOURCE
PSRR (dB)
10
1
SINK
60
40
VOL
0.1
0.01
0.001
0.01
0.1
1
0
100
10
LOAD CURRENT (mA)
05622-030
20
05622-027
OUTPUT VOLTAGE TO SUPPLY RAIL (mV)
100k
FREQUENCY (Hz)
INPUT COMMON-MODE VOLTAGE (V)
1k
10k
FREQUENCY (Hz)
Figure 33. PSRR vs. Frequency
Figure 30. Output Voltage to Supply Rail vs. Load Current
Rev. E | Page 10 of 16
1M
AD8613/AD8617/AD8619
SMALL SIGNAL OVERSHOOT (%)
40
VSY = 1.8V
VSY = 1.8V
TA = 25°C
VOLTAGE (1µV/DIV)
30
–OS
20
05622-031
05622-033
+OS
10
0
10
100
TIME (1s/DIV)
1k
LOAD CAPACITANCE (pF)
Figure 34. Small Signal Overshoot vs. Load Capacitance
Figure 36. 0.1 Hz to 10 Hz Input Voltage Noise
1k
VSY = 1.8V
AV = 1
RL = 10kΩ
CL = 200pF
100
1/F CORNER @ 100Hz
10
05622-034
05622-032
VOLTAGE (500mV/DIV)
INPUT VOLTAGE NOISE (nV/ Hz)
VSY = 1.8V
TA = 25°C
1
TIME (20µs/DIV)
1
10
100
1k
FREQUENCY (Hz)
Figure 37. Voltage Noise Density
Figure 35. Large Signal Transient Response
Rev. E | Page 11 of 16
10k
AD8613/AD8617/AD8619
OUTLINE DIMENSIONS
3.20
3.00
2.80
5.15
4.90
4.65
8
4.00 (0.1574)
3.80 (0.1497)
4
1
PIN 1
IDENTIFIER
4
6.20 (0.2441)
5.80 (0.2284)
1.27 (0.0500)
BSC
0.65 BSC
0.95
0.85
0.75
15° MAX
6°
0°
COPLANARITY
0.10
SEATING
PLANE
0.80
0.55
0.40
0.23
0.09
COMPLIANT TO JEDEC STANDARDS MO-187-AA
0.51 (0.0201)
0.31 (0.0122)
8.75 (0.3445)
8.55 (0.3366)
8
14
1
7
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0039)
COPLANARITY
0.10
0.51 (0.0201)
0.31 (0.0122)
6.20 (0.2441)
5.80 (0.2283)
0.50 (0.0197)
0.25 (0.0098)
1.75 (0.0689)
1.35 (0.0531)
SEATING
PLANE
45°
8°
0°
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012-AB
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 40. 14-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-14)
Dimensions shown in millimeters and (inches)
Rev. E | Page 12 of 16
45°
8°
0°
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
Figure 39. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
Figure 38. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
4.00 (0.1575)
3.80 (0.1496)
0.50 (0.0196)
0.25 (0.0099)
COMPLIANT TO JEDEC STANDARDS MS-012-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
100709-B
0.40
0.25
1.75 (0.0688)
1.35 (0.0532)
0.25 (0.0098)
0.10 (0.0040)
1.10 MAX
0.15
0.05
COPLANARITY
0.10
5
012407-A
1
5
060606-A
8
3.20
3.00
2.80
5.00 (0.1968)
4.80 (0.1890)
AD8613/AD8617/AD8619
5.10
5.00
4.90
14
8
4.50
4.40
4.30
6.40
BSC
1
7
PIN 1
0.65 BSC
1.20
MAX
0.15
0.05
COPLANARITY
0.10
0.20
0.09
SEATING
PLANE
0.30
0.19
0.75
0.60
0.45
8°
0°
061908-A
1.05
1.00
0.80
COMPLIANT TO JEDEC STANDARDS MO-153-AB-1
Figure 41. 14-Lead Thin Shrink Small Outline Package [TSSOP]
(RU-14)
Dimensions shown in millimeters
2.20
2.00
1.80
1.35
1.25
1.15
5
1
4
2
3
2.40
2.10
1.80
0.65 BSC
0.10 MAX
COPLANARITY
0.10
1.10
0.80
0.30
0.15
SEATING
PLANE
0.40
0.10
0.22
0.08
0.46
0.36
0.26
COMPLIANT TO JEDEC STANDARDS MO-203-AA
Figure 42. 5-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-5)
Dimensions shown in millimeters
Rev. E | Page 13 of 16
072809-A
1.00
0.90
0.70
AD8613/AD8617/AD8619
2.90 BSC
5
4
2.80 BSC
1.60 BSC
1
2
3
0.95 BSC
1.90
BSC
*0.90 MAX
0.70 MIN
0.10 MAX
0.50
0.30
0.20
0.08
8°
4°
0°
SEATING
PLANE
0.60
0.45
0.30
100708-A
*1.00 MAX
*COMPLIANT TO JEDEC STANDARDS MO-193-AB WITH
THE EXCEPTION OF PACKAGE HEIGHT AND THICKNESS.
Figure 43. 5-Lead Thin Small Outline Transistor Package [TSOT-23]
(UJ-5)
Dimensions shown in millimeters
0.60 MAX
5
2.95
2.75 SQ
2.55
PIN 1
INDICATOR
8
EXPOSED
PAD
4
0.50
0.40
0.30
TOP VIEW
12° MAX
0.90 MAX
0.85 NOM
SEATING
PLANE
0.70 MAX
0.65 TYP
0.05 MAX
0.01 NOM
0.30
0.23
0.18
0.50
BSC
0.60 MAX
0.20 REF
1.60
1.50
1.40
1
BOTTOM VIEW
2.23
2.13
2.03
PIN 1
INDICATOR
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
Figure 44. 8-Lead Lead Frame Chip Scale Package [LFCSP_VD]
3 mm × 3 mm Body, Very Thin, Dual Lead
(CP-8-9)
Dimensions shown in millimeters
Rev. E | Page 14 of 16
051909-A
3.25
3.00 SQ
2.75
AD8613/AD8617/AD8619
ORDERING GUIDE
Model 1
AD8613AKSZ-R2
AD8613AKSZ-REEL
AD8613AKSZ-REEL7
AD8613AUJZ-R2
AD8613AUJZ-REEL
AD8613AUJZ-REEL7
AD8617ACPZ-R2
AD8617ACPZ-R7
AD8617ACPZ-RL
AD8617ARMZ
AD8617ARMZ-REEL
AD8617ARZ
AD8617ARZ-REEL
AD8617ARZ-REEL7
AD8617WARMZ-REEL 2
AD8617WARZ-R72
AD8617WARZ-RL2
AD8619ARUZ
AD8619ARUZ-REEL
AD8619ARZ
AD8619ARZ-REEL
AD8619ARZ-REEL7
1
2
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
5-Lead SC70
5-Lead SC70
5-Lead SC70
5-Lead TSOT-23
5-Lead TSOT-23
5-Lead TSOT-23
8-Lead LFCSP_VD
8-Lead LFCSP_VD
8-Lead LFCSP_VD
8-Lead MSOP
8-Lead MSOP
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead MSOP
8-Lead SOIC_N
8-Lead SOIC_N
14-Lead TSSOP
14-Lead TSSOP
14-Lead SOIC_N
14-Lead SOIC_N
14-Lead SOIC_N
Z = RoHS Compliant Part.
Qualified for automotive applications.
Rev. E | Page 15 of 16
Package Option
KS-5
KS-5
KS-5
UJ-5
UJ-5
UJ-5
CP-8-9
CP-8-9
CP-8-9
RM-8
RM-8
R-8
R-8
R-8
RM-8
R-8
R-8
RU-14
RU-14
R-14
R-14
R-14
Branding
A0Y
A0Y
A0Y
A0Y
A0Y
A0Y
A0T
A0T
A0T
A0T
A0T
A23
AD8613/AD8617/AD8619
NOTES
©2005–2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D05622-0-3/10(E)
Rev. E | Page 16 of 16