1N5059GP THRU 1N5062GP GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 200 to 800 Volts Forward Current - 1.0 Ampere FEATURES D * DO-204AC T E ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 1.0 Ampere operation at TA=75°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length at 5 lbs., (2.3kg) tension N 0.034 (0.86) P A T E 1.0 (25.4) MIN. 0.028 (0.71) DIA. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. MECHANICAL DATA Dimensions in inches and (millimeters) *Glass -plastic encapsulation technique is covered by Case: JEDEC DO-204AC molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 ® MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. * Maximum repetitive peak reverse voltage SYMBOLS 1N5059GP 1N5060GP 1N5061GP 1N5062GP UNITS VRRM 200 400 600 800 Volts VRMS 140 280 420 560 Volts * Maximum DC blocking voltage VDC 200 400 600 800 Volts * Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75°C I(AV) 1.0 Amp * Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50.0 Amps VF 1.2 Volts Maximum RMS voltage * Maximum instantaneous forward voltage at 1.0A, TA=75°C * Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length at TA=25°C TA=75°C * Maximum DC reverse current at rated DC blocking voltage TA= 25°C TA=175°C Typical reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range IR(AV) 5.0 150.0 µA IR 5.0 300.0 µA trr 2.0 µs CJ 15.0 pF RΘJA RΘJL 45.0 20.0 °C/W TJ, TSTG -65 to +175 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted * JEDEC registered value 4/98 RATINGS AND CHARACTERISTIC CURVES 1N5059GP THRU 1N5062GP FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 1.0 60 HZ RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 0.8 0.6 0.4 0.2 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 20 10 0.375" (9.5mm) LEAD LENGTH 0 0 0 25 50 75 100 125 150 175 1 10 100 NUMBER OF CYCLES AT 60 HZ AMBIENT TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=25°C PULSE WIDTH=300µs 1 0.1 0.01 0.4 0.6 0.8 1.0 1.4 1.2 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 TJ=125°C 1 TJ=100°C 0.1 TJ=25°C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 1 TRANSIENT THERMAL IMPEDANCE (°C/W) JUNCTION CAPACITANCE, pF 30 100 10 1 0.1 0.01 0.1 1 t, PULSE DURATION, sec 1 10 REVERSE VOLTAGE, VOLTS 100 10 100