AD AD8219

Zero Drift, Unidirectional
Current Shunt Monitor
AD8219
High common-mode voltage range
4 V to 80 V operating
−0.3 V to +85 V survival
Buffered output voltage
Gain = 60 V/V
Wide operating temperature range: −40°C to +125°C
Excellent ac and dc performance
±100 nV/°C typical offset drift
±50 µV/°C typical offset
±5 ppm/°C typical gain drift
110 dB typical CMRR at dc
FUNCTIONAL BLOCK DIAGRAM
VS
R4
LDO
–IN
R1
OUT
+IN
R2
R3
AD8219
GND
09415-001
FEATURES
Figure 1.
APPLICATIONS
High-side current sensing
48 V telecom
Power management
Base stations
Unidirectional motor control
Precision high voltage current sources
GENERAL DESCRIPTION
The AD8219 is a high voltage, high resolution, current shunt
amplifier. It features a set gain of 60 V/V, with a maximum
±0.3% gain error over the entire temperature range. The
buffered output voltage directly interfaces with any typical
converter. The AD8219 offers excellent input common-mode
rejection from 4 V to 80 V. The AD8219 performs unidirectional
current measurements across a shunt resistor in a variety of
industrial and telecom applications including motor control,
power management, and base station power amplifier bias
control.
The AD8219 offers breakthrough performance throughout
the −40°C to +125°C temperature range. It features a zero
drift core, which leads to a typical offset drift of ±100 nV/°C
throughout the operating temperature and common-mode
voltage range. Special attention is devoted to output linearity
being maintained throughout the input differential voltage range,
regardless of the common-mode voltage present, while the
typical input offset voltage is ±50 µV.
The AD8219 is offered in a 8-lead MSOP package.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2011 Analog Devices, Inc. All rights reserved.
AD8219
TABLE OF CONTENTS
Features .............................................................................................. 1
Amplifier Core ............................................................................ 10
Applications ....................................................................................... 1
Supply Connections ................................................................... 10
Functional Block Diagram .............................................................. 1
Output Clamping ....................................................................... 10
General Description ......................................................................... 1
Application Information ................................................................ 11
Revision History ............................................................................... 2
Output Linearity ......................................................................... 11
Specifications..................................................................................... 3
Applications Information .............................................................. 12
Absolute Maximum Ratings............................................................ 4
High-Side Current Sensing ....................................................... 12
ESD Caution .................................................................................. 4
Motor Control Current Sensing ............................................... 12
Pin Configuration and Function Descriptions ............................. 5
Outline Dimensions ....................................................................... 13
Typical Performance Characteristics ............................................. 6
Ordering Guide .......................................................................... 13
Theory of Operation ...................................................................... 10
REVISION HISTORY
1/11—Revision 0: Initial Version
Rev. 0 | Page 2 of 16
AD8219
SPECIFICATIONS
TOPR = −40°C to +125°C, TA = 25°C, RL = 25 kΩ, input common-mode voltage (VCM) = 4 V (RL is the output load resistor), unless
otherwise noted.
Table 1.
Parameter
GAIN
Initial
Accuracy
Accuracy over Temperature
Gain vs. Temperature
VOLTAGE OFFSET
Offset Voltage (RTI 1)
Over Temperature (RTI1)
Offset Drift
INPUT
Bias Current2
Common-Mode Input Voltage Range
Differential Input Voltage Range3
Common-Mode Rejection (CMRR)
OUTPUT
Output Voltage Range Low4
Output Voltage Range High4
Output Impedance
DYNAMIC RESPONSE
Small Signal −3 dB Bandwidth
Slew Rate
NOISE
0.1 Hz to 10 Hz, (RTI1)
Spectral Density, 1 kHz, (RTI1)
POWER SUPPLY
Operating Range
Quiescent Current Over Temperature5
Power Supply Rejection Ratio (PSRR)
TEMPERATURE RANGE
For Specified Performance
Min
Typ
Max
Unit
Test Conditions/Comments
V/V
%
%
ppm/°C
VO ≥ 0.1 V dc, TA
TOPR
TOPR
µV
µV
nV/°C
25°C
TOPR
TOPR
220
80
83
µA
µA
V
mV
dB
TA, input common mode = 4 V, VS = 4 V
TOPR
Common-mode continuous
Differential input voltage
TOPR
VS − 0.1
TA
TA
2
V
V
Ω
500
1
kHz
V/µs
2.3
110
µV p-p
nV/√Hz
60
±0.1
±0.3
±5
±200
±300
±100
130
4
0
94
110
0.01
4
100
−40
80
800
110
+125
V
µA
dB
VS input range
TOPR
°C
RTI = referred to input.
Refer to Figure 8 for further information on the input bias current. This current varies based on the input common-mode voltage. Additionally, the input bias current
flowing to the +IN pin is also the supply current to the internal LDO.
3
The differential input voltage is specified as 83 mV maximum because the output is internally clamped to 5.6 V. See the Output Clamping section.
4
See Figure 19 and Figure 20 for further information on the output range of the AD8219 with various loads. The AD8219 output clamps to a maximum voltage of 5.6 V
when the voltage at Pin +IN is greater than 5.6 V. When the voltage at +IN is less than 5.6 V, the output reaches a maximum value of (VS − 100 mV).
5
VS (Pin 2) can be connected to a separate supply ranging from 4 V to 80 V, or it can be connected to the positive input pin (+IN) of the AD8219. In this mode, the
current drawn varies with increasing voltage. See Figure 9.
1
2
Rev. 0 | Page 3 of 16
AD8219
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Maximum Input Voltage ( +IN, −IN to GND)
Differential Input Voltage (+IN to –IN)
Human Body Model (HBM) ESD Rating
Operating Temperature Range (TOPR)
Storage Temperature Range
Output Short-Circuit Duration
Rating
−0.3 V to +85 V
±5 V
±1000 V
−40°C to +125°C
−65°C to +150°C
Indefinite
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. 0 | Page 4 of 16
AD8219
+IN 1
VS 2
AD8219
NC 3
TOP VIEW
(Not to Scale)
GND 4
8
–IN
7
NC
6
NC
5
OUT
NC = NO CONNECT.
DO NOT CONNECT TO THIS PIN.
09415-002
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
1
2
3
4
5
6
7
8
Mnemonic
+IN
VS
NC
GND
OUT
NC
NC
−IN
Description
Noninverting Input.
Supply Pin. Bypass with a standard 0.1 μF capacitor.
Do Not Connect to This Pin.
Ground.
Output.
Do Not Connect to This Pin.
Do Not Connect to This Pin.
Inverting Input.
Rev. 0 | Page 5 of 16
AD8219
TYPICAL PERFORMANCE CHARACTERISTICS
40
–19.0
–19.5
30
–20.0
20
MAGNITUDE (dB)
VOS (µV)
–20.5
–21.0
–21.5
–22.0
10
0
–10
–22.5
–20
–23.0
–20
0
20
40
60
80
100
120
140
TEMPERATURE (°C)
–40
1k
09415-121
100k
1M
10M
FREQUENCY (Hz)
Figure 3. Typical Input Offset vs. Temperature
Figure 6. Typical Small Signal Bandwidth (VOUT = 200 mV p-p)
120
7
6
TYPICAL OUTPUT ERROR (%)
110
100
CMRR (dB)
10k
90
80
70
60
5
4
3
2
1
0
–1
1k
10k
100k
1M
FREQUENCY (Hz)
–2
09415-104
50
100
0
1
2
3
4
5
6
7
8
9
10
DIFFERENTIAL INPUT VOLTAGE (mV)
Figure 4. Typical CMRR vs. Frequency
09415-128
–24.0
–40
09415-105
–30
–23.5
Figure 7. Typical Output Error vs. Differential Input Voltage
300
0
–50
250
INPUT BIAS CURRENT (µA)
–150
–200
–250
–300
–350
–400
+IN
200
150
100
50
–450
–20
0
20
40
60
80
100
TEMPERATURE (°C)
120
140
0
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
INPUT COMMON-MODE VOLTAGE (V)
Figure 5. Typical Gain Error vs. Temperature
Figure 8. Input Bias Current vs. Input Common-Mode Voltage
(Differential Input Voltage = 5 mV) (VS = 5 V)
Rev. 0 | Page 6 of 16
09415-101
–500
–40
–IN
09415-120
GAIN ERROR (ppm)
–100
AD8219
550
SUPPLY CURRENT (µA)
500
VCM = 5V
450
INPUT
50mV/DIV
VCM = 80V
400
350
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
SUPPLY VOLTAGE (V)
5µs/DIV
Figure 9. Typical Supply Current vs. Supply Voltage (VS Connected to +IN)
09415-110
0
09415-102
OUTPUT
2V/DIV
300
Figure 12. Rise Time (Differential Input = 50 mV)
550
SUPPLY CURRENT (µA)
500
INPUT
5mV/DIV
450
400
350
OUTPUT
200mV/DIV
300
0
20
40
60
80
100
120
140
TEMPERATURE (°C)
1µs/DIV
Figure 10. Typical Supply Current Change over Temperature (VS = 5 V)
09415-111
–20
Figure 13. Fall Time (Differential Input = 5 mV)
INPUT
50mV/DIV
INPUT
5mV/DIV
OUTPUT
2V/DIV
1µs/DIV
09415-109
OUTPUT
200mV/DIV
5µs/DIV
Figure 14. Fall Time (Differential Input = 50 mV)
Figure 11. Rise Time (Differential Input = 5 mV)
Rev. 0 | Page 7 of 16
09415-112
200
–40
09415-103
250
AD8219
INPUT
100mV/DIV
OUTPUT
2V/DIV
6.0
5.5
5.0
4.5
4.0
–40
09415-113
5µs/DIV
6.5
–20
0
20
40
60
80
100
09415-108
MAXIMUM OUTPUT SOURCE CURRENT (mA)
7.0
120
TEMPERATURE (°C)
Figure 15. Differential Overload Recovery, Falling
Figure 18. Maximum Output Source Current vs. Temperature
OUTPUT VOLTAGE FROM RAIL (V)
5.0
INPUT
100mV/DIV
OUTPUT
2V/DIV
+125°C
+25°C
–40°C
4.8
4.5
4.3
4.0
3.8
3.5
09415-114
3.0
5µs/DIV
0
1.5
2.0
2.5
11
10
9
8
7
6
20
40
60
80
100
120
TEMPERATURE (°C)
Figure 17. Maximum Output Sink Current vs. Temperature
0.30
0.25
0.20
0.15
0.10
0.05
0
09415-107
0
+125°C
+25°C
–40°C
0.35
0
0.5
1.0
1.5
2.0
2.5
SINK CURRENT (mA)
3.0
3.5
4.0
09415-129
OUTPUT VOLTAGE FROM GROUND (V)
0.40
–20
3.0
Figure 19. Output Voltage Range vs. Output Source Current (VS = 5 V)
12
MAXIMUM OUTPUT SINK CURRENT (mA)
1.0
SOURCE CURRENT (mA)
Figure 16. Differential Overload Recovery, Rising
5
–40
0.5
09415-106
3.3
Figure 20. Output Voltage Range From Ground vs. Output Sink Current (VS = 5 V)
Rev. 0 | Page 8 of 16
AD8219
70
60
INPUT COMMON MODE
50V/DIV
COUNT
50
40
30
OUTPUT
200mV/DIV
20
09415-115
0
–6
2µs/DIV
–4
–2
0
2
4
6
0.4
0.6
GAIN DRIFT (ppm/°C)
09415-119
10
Figure 24. Gain Drift Distribution
Figure 21. Common-Mode Step Response (Falling)
35
30
25
COUNT
INPUT COMMON MODE
50V/DIV
20
15
10
OUTPUT
200mV/DIV
09415-116
0
–0.6
1µs/DIV
30
20
10
0
50
VOSI (µV)
100
150
09415-118
COUNT
40
–50
0
0.2
Figure 25. Input Offset Drift Distribution
50
–100
–0.2
OFFSET DRIFT (µV/°C)
Figure 22. Common-Mode Step Response (Rising)
0
–150
–0.4
Figure 23. Input Offset Distribution
Rev. 0 | Page 9 of 16
09415-117
5
AD8219
THEORY OF OPERATION
AMPLIFIER CORE
In typical applications, the AD8219 amplifies a small differential
input voltage generated by the load current flowing through
a shunt resistor. The AD8219 rejects high common-mode voltages (up to 80 V) and provides a ground referenced, buffered
output that interfaces with an analog-to-digital converter (ADC).
Figure 26 shows a simplified schematic of the AD8219.
GND
R4
ILOAD
LDO
–IN
V2
SHUNT
V1
R1
OUT
+IN
R2
4V
TO
80V
R3
GND
SUPPLY CONNECTIONS
OUTPUT CLAMPING
AD8219
09415-024
LOAD
The main amplifier uses a novel zero drift architecture, providing
the end user with breakthrough temperature stability. The offset
drift is typically less than ±100 nV/°C. This performance leads
to optimal accuracy and dynamic range.
The AD8219 includes an internal LDO, which allows the user
to connect the VS pin to the inputs, or use a separate supply at
Pin 2 (VS) to power the device. The input range of the supply
pin is equivalent to the input common-mode range of 4 V to
80 V. The user must ensure that VS is always connected to the
+IN pin or a separate low impedance supply, which can range
from 4 V to 80 V. The VS pin should not be floating.
4V TO 80V
VS
The AD8219 accurately amplifies the input differential signal,
rejecting high voltage common modes ranging from 4 V to 80 V.
Figure 26. Simplified Schematic
The AD8219 is configured as a difference amplifier. The
transfer function is
OUT = (R4/R1) × (V1 − V2)
Resistors R4 and R1 are matched to within 0.01% and have
values of 1.5 MΩ and 25 kΩ, respectively, meaning an input
to output total gain of 60 V/V for the AD8219, while the
difference at V1 and V2 is the voltage across the shunt resistor
or VIN. Therefore, the input-to-output transfer function for the
AD8219 is
When the input common-mode voltage in the application is
above 5.6 V, the internal LDO output of the AD8219 also
reaches its maximum value of 5.6 V, which is the maximum
output range of the AD8219. Because in typical applications
the output interfaces with a converter, clamping the AD8219
output voltage to 5.6 V ensures the ADC input is not damaged
due to excessive overvoltage.
OUT = (20) × (VIN)
Rev. 0 | Page 10 of 16
AD8219
APPLICATION INFORMATION
OUTPUT LINEARITY
In all current sensing applications where the common-mode
voltage can vary significantly, it is important that the current
sensor maintain the specified output linearity, regardless of
the input differential or common-mode voltage. The AD8219
maintains a very high input-to-output linearity even when the
differential input voltage is very small.
Regardless of the common mode, the AD8219 provides a
correct output voltage when the input differential is at least
1 mV. The ability of the AD8219 to work with very small
differential inputs, regardless of the common-mode voltage,
allows for optimal dynamic range, accuracy, and flexibility in
any current sensing application.
0.7
0.5
0.4
0.3
0.2
0.1
0
0
1
2
3
4
5
6
7
8
9
10
DIFFERENTIAL INPUT VOLTAGE (mV)
09415-127
OUTPUT VOLTAGE (V)
0.6
Figure 27. Typical Gain Linearity at Small Differential Inputs
(VCM = 4 V to 80 V)
Rev. 0 | Page 11 of 16
AD8219
APPLICATIONS INFORMATION
HIGH-SIDE CURRENT SENSING
MOTOR CONTROL CURRENT SENSING
In this configuration, the shunt resistor is referenced to the
battery (see Figure 28). High voltage is present at the inputs
of the current sense amplifier. When the shunt is battery
referenced, the AD8219 produces a linear ground referenced
analog output.
The AD8219 is a practical, accurate solution for high-side
current sensing in motor control applications. In cases where
the shunt resistor is referenced to a battery and the current
flowing is unidirectional (as shown in Figure 30), the AD8219
monitors the current with no additional supply pin necessary
provided the battery voltage in the following circuit is in the 4 V
to 80 V range.
ILOAD
4V
TO
80V
BATTERY
SHUNT
LOAD
IMOTOR
–IN
+IN
AD8219
09415-026
GND
ILOAD
LOAD
–IN
+IN
AD8219
VS
OUT
GND
09415-029
4V
TO
80V
OUT
GND
Figure 28 shows the supply pin, VS, connected directly to the
positive input (+IN) pin. In this mode, the internal LDO powers
the AD8219 as long as the common-mode voltage at the input
pins is 4 V to 80 V. Additionally, VS can also be connected to a
standalone supply that can vary from 4 V to 80 V as shown in
Figure 29.
SHUNT
MOTOR
AD8219
VS
Figure 28. Battery Referenced Shunt Resistor
4V
TO
80V
–IN
+IN
OUT
Figure 29. Standalone Supply Operation
Rev. 0 | Page 12 of 16
09415-027
VS
Figure 30. High-Side Current Sensing in Motor Control
AD8219
OUTLINE DIMENSIONS
3.20
3.00
2.80
8
3.20
3.00
2.80
1
5.15
4.90
4.65
5
4
PIN 1
IDENTIFIER
0.65 BSC
0.95
0.85
0.75
15° MAX
1.10 MAX
0.40
0.25
6°
0°
0.23
0.09
0.80
0.55
0.40
COMPLIANT TO JEDEC STANDARDS MO-187-AA
10-07-2009-B
0.15
0.05
COPLANARITY
0.10
Figure 31. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
AD8219BRMZ
AD8219BRMZ-RL
1
Temperature Range
−40°C to +125°C
−40°C to +125°C
Package Description
8-Lead Mini Small Outline Package [MSOP]
8-Lead Mini Small Outline Package [MSOP]
Z = RoHS Compliant Part.
Rev. 0 | Page 13 of 16
Package Option
RM-8
RM-8
Branding
Y3S
Y3S
AD8219
NOTES
Rev. 0 | Page 14 of 16
AD8219
NOTES
Rev. 0 | Page 15 of 16
AD8219
NOTES
©2011 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D09415-0-1/11(0)
Rev. 0 | Page 16 of 16