DISCRETE SEMICONDUCTORS DATA SHEET ok, halfpage M3D049 BAP70-03 Silicon PIN diode Product specification Supersedes data of 2002 Jul 02 2002 Aug 06 Philips Semiconductors Product specification Silicon PIN diode BAP70-03 FEATURES PINNING • High voltage, current controlled RF resistor for attenuators PIN • Low diode capacitance • Very low series inductance. APPLICATIONS DESCRIPTION 1 cathode 2 anode handbook, halfpage 1 2 • RF attenuators • (SAT)TV • Car radio. MAM406 Marking code: A9. DESCRIPTION Fig.1 Simplified outline (SOD323) and symbol. Planar PIN diode in a SOD323 small SMD plastic package. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VR continuous reverse voltage − 50 V IF continuous forward current − 100 mA Ptot total power dissipation − 500 mW Tstg storage temperature Ts = 90 °C −65 +150 °C Tj junction temperature −65 +150 °C ELECTRICAL CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL PARAMETER CONDITIONS TYP. MAX. UNIT VF forward voltage IF = 50 mA 0.9 1.1 V IR reverse leakage current VR = 30 V − 20 nA Cd diode capacitance VR = 0 V; f = 1 MHz 570 − fF VR = 1 V; f = 1 MHz 400 − fF VR = 5 V; f = 1 MHz 270 − fF VR = 20 V; f = 1 MHz 200 250 fF IF = 0.5 mA; f = 100 MHz 77 100 Ω rD diode forward resistance IF = 1 mA; f = 100 MHz 40 50 Ω IF = 10 mA; f = 100 MHz 5.4 7 Ω IF = 100 mA; f = 100 MHz 1.4 1.9 Ω τL charge carrier life time when switched from IF = 10 mA to 1.25 IR = 6 mA; RL = 100 Ω; measured at IR = 3 mA − µs LS series inductance IF = 100 mA; f = 100 MHz − nH 2002 Aug 06 2 1.5 Philips Semiconductors Product specification Silicon PIN diode BAP70-03 THERMAL CHARACTERISTICS SYMBOL PARAMETER VALUE UNIT 120 K/W thermal resistance from junction to soldering point Rth j-s GRAPHICAL DATA MCE007 103 handbook, halfpage MCE008 600 Cd (fF) 500 handbook, halfpage rD (Ω) 102 400 300 10 200 100 1 10−1 1 0 102 10 0 IF (mA) 5 f = 100 MHz; Tj = 25 °C. f = 1 MHz; Tj = 25 °C. Fig.2 Fig.3 Forward resistance as a function of forward current; typical values. 2002 Aug 06 3 10 15 VR (V) 20 Diode capacitance as a function of reverse voltage; typical values. Philips Semiconductors Product specification Silicon PIN diode BAP70-03 PACKAGE OUTLINE SOD323 Plastic surface mounted package; 2 leads Q A A1 c Lp v M A HE A D 1 E 2 bp (1) 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max. bp c D E HE Lp Q v mm 1.1 0.8 + 0.05 − 0.05 0.40 0.25 0.25 0.10 1.8 1.6 1.35 1.15 2.7 2.3 0.45 0.15 0.25 0.15 0.2 Note 1. The marking bar indicates the cathode. OUTLINE VERSION SOD323 2002 Aug 06 REFERENCES IEC JEDEC EIAJ SC-76 4 EUROPEAN PROJECTION ISSUE DATE 98-09-14 99-09-13 Philips Semiconductors Product specification Silicon PIN diode BAP70-03 DATA SHEET STATUS DATA SHEET STATUS(1) PRODUCT STATUS(2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2002 Aug 06 5 Philips Semiconductors Product specification Silicon PIN diode BAP70-03 NOTES 2002 Aug 06 6 Philips Semiconductors Product specification Silicon PIN diode BAP70-03 NOTES 2002 Aug 06 7 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: [email protected]. SCA74 © Koninklijke Philips Electronics N.V. 2002 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613516/03/pp8 Date of release: 2002 Aug 06 Document order number: 9397 750 10094