Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 40A HIGH CURRENT SILICON BRIDGE RECTIFIERS BP40-005 THRU BP40-10 0.2〞 (5.08)diam. 0.2〞 (5.08)diam. FEATURES z CURRENT RATING 40A z REVERSE VOLTAGE RATING UP TO 1000V z TYPICAL IR LESS THAN 1μA z HIGH TEMPERATURE SOLDERING GUARANTEED: 260°C /10 SECOND HOLE FOR No.10 SCREW 1.13(28.7) 1.12(28.4) HOLE FOR No.10 SCREW 0.652 (16.6) ＋ 0.657(16.7) 0.618(15.7) 0.728(18.5) 0.689(17.5) 1.13(28.7) 1.12(28.4) 0.752(19.10) 0.673(17.10) 0.565(14.35) 0.525(13.35) 0.25 (6.35) 0.094 MECHANICAL DATA (2.4) diam z CASE: METAL HEAT SINK CASE, ELECTRICALLY INSULATED DIMENSIONS IN INCHES AND (MILLIMETERS) z TERMINALS: UNIVERSAL .25”(6.3mm) FAST ON z MOUNTING METHOD: BOLT DOWN ON HEAT SINK WITH H* 0.442(11.23) 0.432(10.97) SILICON THERMAL COMPOUND BETWEEN BRIDGE AND MOUNTING SURFACE FOR MAXIMUM HEAT TRANSFER EFFICIENCY z WEIGHT: 20 GRAMS 0.042(1.07) 0.038(0.97) L* I* 1.00(25.40) 0.90(22.86) DIM H* I* DIMENSIONS L* 0.469(11.90) 0.429(10.90) MIN 0.295(7.5) 0.74(18.80) 1.09(27.89) 1.200 (30.5) MIN H* 0.442(11.23) 0.432(10.97) MAX 0.311(7.9) 0.84(21.30) - REMARK SUFFIX “S” THIN CASE SUFFIX “S” THIN CASE SUFFIX “S” THIN CASE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL BP40-005 BP40-01 BP40-02 BP40-04 BP40-06 BP40-08 BP40-10 UNITS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED OUTPUT CURRENT AT TC=55°C PEAK FORWARD SURGE CURRENT SINGLE SINE-WAVE SUPERIMPOSED ON RATED LOAD STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IO 40.0 A IFSM 400 A TSTG - 55 TO + 175 ℃ TOP - 55 TO + 175 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL BP40-005 BP40-01 BP40-02 BP40-04 BP40-06 BP40-08 BP40-10 UNITS MAXIMUM INSTANTANEOUS FORWARD VOLTAGE PER BRIDGE ELEMENT AT SPECIFIED CURRENT MAXIMUM REVERSE DC CURRENT AT RATE DC BLOCKING VOLTAGE PER ELEMENT NOTE: Suffix No. Versus Different Cases and Terminals VF 1.1 V IR 10 μA CASE SUFFIX No NORMAL METAL CASE THIN METAL CASE TERMINAL FAST ON TERMINALS WIRE LEAD TERMINALS IN LINE PIN CONFIGURATION BP40-005 THRU BP40-10 NORMAL PLASTIC CASE ALUMINUM BASE THIN PLASTIC CASE ALUMINUM BASE PS NO SUFFIX W S WS P PW PWS － － L LS Page: 1 RATINGS AND CHARACTERISTIC CURVES BP40-005 THRU BP40-10 FIG. 1 -MAXIMUM OUTPUT RECTIFIED CURRENT FIG. 4 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT WITH (400mm2×1.5mm) COPPER 35 AVERAGE FORWARD OUTPUT CURRENT, AMPERES PEAK FORWARD SURGE CURRENT, AMPERES 40 30 25 20 15 WITHOUT HEAT SINK 10 5 400 300 200 100 TJ=175℃ SINGLE SINE-WAVE (JEDEC Method) 40 1 1.5 2 3 4 5 6 7 8910 15 20 0 30 40 50 70100 NUMBER OF CYCLES AT 60HZ 20 40 60 80 100 120 140 160 180 CASE TEMPERATURE TC ℃ FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT FIG. 2 - TYPICAL REVERSE CHARACTERISTICS AT TJ=25℃ CAPACITANCE, C.J. pF 1.0 0.1 500 400 300 250 200 TJ=25℃ f=1MHZ Vsig=50m Vp-p 150 100 60 .01 1 1.5 2 3 4 5 6 7 8910 15 20 0 20 40 60 80 100 120 140 30 40 50 70100 REVERSE VOLTAGE, VOLTS PERCENT OR RATED PEAK REVERSE VOLTAGE FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 .442（11.23） 500 .432（10.97） 100 1.13（28.7） 50 1.12（28.4） 10 － AC ＋ .550 （13.9） 5 .75 （19.1） .140（3.6） .120（3.05） .040（1.2） 1.0 .200 （5.1） TJ=25℃ 300us Pulse Width 1% Duty Cycle 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 BP40-L INSTANTANEOUS FORWARD VOLTAGE, VOLTS BP40-005 THRU BP40-10 IN LINE PIN CONFIGURATION (PLASTIC CASE) Page: 2