SynQor BQ50120QTA20NYS Quarter-brick dc bus converter Datasheet

Technical
S pecification
BQ50120QTA20
42-53V
12V
240Watt
2000Vdc
Quar ter-brick
Input
Output
Power
Isolation
DC Bus Conver ter
T he Bu s Qo r ™ B Q 5 0 1 2 0 Q T A 2 0 b u s c o n v e r t e r i s a n e x t - g e n e ra tion , bo ar d -mo un ta bl e, is ol ated , fixe d s witchi ng fr eq uen c y d c/d c con verter tha t u se s s y nch r on ou s r ectifi catio n to
a ch ieve extr emel y h igh con vers ion effic ien cy. Th e p ower
d is sip a t ed b y t he con v er te r is so l ow th a t a h eat s in k is no t
r eq ui red , whic h s av es c os t, wei ght , hei ght , an d a p pl ica t ion
e ffor t. T he Bu sQ or ser ies p r ov id es a n iso la t ed s t ep d own
vol tage fr om 48V to a 1 2V inter med ia te b us with n o regu l a tio n i n a s ta n da r d “ q ua rt er - br ick ” mod ul e. B us Q or con v er t ers a r e id ea l fo r cu st om ers wh o n eed mu l tip l e ou t p ut s
a n d wish to bu il d o r bu y p oin t of loa d co nver ter s to wor k
with a 12V rail. RoHS Compliant (see page 12 ).
BQ50120QTA20 Module
Operational Features
• Ultra-high efficiency, >96% at full rated load current
• Delivers up to 20 amps (240 Watts) of output current
(power) with minimal derating - no heatsink required
• Input voltage range: 42V – 53V
• Fixed frequency switching provides predictable EMI performance
Mechanical Features
• Industry standard quarter-brick bus converter pin-out
• Industry standard size: 1.45” x 2.3” (36.8x58.4mm)
• Total height only 0.43” (10.9mm), permits better airflow
and smaller card pitch
• Total weight: 1.5 oz. (42 grams)
• Flanged pins designed to permit surface mount soldering (can avoid wave solder) using FPiP technique
Contr ol Features
• On/Off control referenced to input side
• Current sharing allowed without the use of any external
circuitry.
Product # BQ50120QTA20
Phone 1-888-567-9596
Bus
Conver ter
www.synqor.com
Pr otection Features
• Input under-voltage lockout and over-voltage
shutdown protects against abnormal input voltages
• Output current limit and short circuit protection
• Output over-voltage protection
• Thermal shutdown
Safety Features
• 2000V, 30 MΩ input-to-output isolation
• UL/cUL 60950-1 recognized (US & Canada), basic
insulation rating
• TUV certified to EN60950-1
• Meets 72/23/EEC and 93/68/EEC directives
• Meets UL94V-0 flammability requirements
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 1
Input:
Output:
Current:
Package:
Technical Specification
MECHANICAL
DIAGRAM
42-53 V
12 V
20 A
Quarter-brick
2.30
(58.4)
0.14
(3.6)
2.00
(50.8)
0.43
(10.8)
Top View
1.45
(36.8)
0.600
0.600
(15.24)
(15.24)
0.300
(7.62)
0.43
Side View
(10.9)
Bottom side
Clearance
See Note 9
0.060+/-0.030
(1.52+/-0.76)
Lowest
Component
Load Board
Flanged Pin
See Note 10
0.145
(3.68)
See Note 3
NOTES
PIN DESIGNATIONS
1) Pins 1-3 are 0.040” (1.02mm) diameter with 0.080”
(2.03 mm) diameter standoff shoulders.
2) Pins 4 and 5 are 0.062” (1.57 mm) diameter with 0.100”
(2.54 mm) diameter standoff shoulders.
3) Other pin extension lengths available. Recommended pin
length is 0.03” (0.76mm) greater than the PCB thickness.
4) All Pins: Material - Copper Alloy
Finish (6/6 RoHS) - Matte Tin over Nickel plate
Finish (5/6 RoHS) - Tin/Lead over Nickel plate
5) Undimensioned components are shown for visual reference
only.
6) All dimensions in inches (mm)
Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm)
x.xxx +/-0.010 in. (x.xx +/-0.25mm)
7) Weight: 1.5 oz. (42 g) typical
8) Workmanship: Meets or exceeds IPC-A-610C Class II
9) UL/TUV standards require a clearance of 0.04” (1.02mm)
around primary areas of the module. Refer to section on
Keep Out Areas under Application Considerations for
details.
10) The flanged pins are designed to permit surface mount
soldering (allowing to avoid the wave soldering process)
through the use of the flanged pin-in-paste technique.
Product # BQ50120QTA20
Phone 1-888-567-9596
Pin No.
Name
Function
1
Vin(+)
Input Positive (42V - 53V)
2
ON/OFF
Logic control input to turn
converter on and off.
3
Vin(-)
Input Negative
4
Vout(-)
Output Negative
5
Vout(+)
Output Positive
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 2
Input:
Output:
Current:
Package:
Technical Specification
42-53 V
12 V
20 A
Quarter-brick
BQ50120QTA20 ELECTRICAL CHARACTERISTICS
TA=25°C, airflow rate=300 LFM, Vin=48Vdc unless otherwise noted; full operating temperature range is -40°C to +100°C ambient temperature with appropriate power derating. Specifications subject to change without notice.
Parameter
Min.
Typ.
Max.
Units
60
56
2000
100
125
12
V
V
V
°C
°C
V
53
V
Notes & Conditions
ABSOLUTE MAXIMUM RATINGS
Input Voltage
Non-Operating
Operating
Isolation Voltage (input to output)
Operating Temperature
Storage Temperature
Voltage at ON/OFF input pin
INPUT CHARACTERISTICS
Operating Input Voltage Range
Input Under-Voltage Lockout
Turn-On Voltage Threshold
Turn-Off Voltage Threshold
Lockout Voltage Hysteresis
Input Over-Voltage Shutdown
Turn-Off Voltage Threshold
Turn-On Voltage Threshold
Maximum Input Current
No-Load Input Current
Disabled Input Current
Inrush Current Transient Rating
Input Reflected-Ripple Current
Input Terminal-Ripple Current
Recommended Input Fuse1
Input Filter Component Values (C\L\C)
Recommended External Input Capacitance
-40
-55
-2
42
39.5
38.0
1.5
V
V
V
55.0
54.0
V
V
A
A
mA
A 2s
mA
mA
A
µF\µH\µF
µF
7.5
5
75
1\1.5\2
47
OUTPUT CHARACTERISTICS
Output Voltage Set Point
Output Voltage Regulation
Over Line
Over Load
Over Temperature
Total Output Voltage Range
Output Voltage Ripple and Noise2
Peak-to-Peak
RMS
Operating Output Current Range
Output DC Current-Limit Inception
Output DC Current-Limit Shutdown Voltage
Current Share Accuracy (2 units paralleled)
Back-Drive Current Limit while Disabled
Maximum Output Capacitance
48
9.7
0
6.3
0.17
15
0.01
100
12
12.00
V
+10 \ 1.2
+4.1 \ 500
+1.7 \ 200
%\V
%\mV
%\mV
V
30
15
24.8
8
+10
10
13.3
60
20
20
3,000
mV
mV
A
A
V
%
mA
µF
Continuous
Continuous
Basic insulation, Pollution Degree 2
Vin when unit will shut down
Vin when unit turns on after shutdown event
100% Load, 42 Vin
I2T rating of external fuse should be higher
RMS through 10µH inductor; Figures 12 & 14
RMS, full load; Figures 12 & 13
Fast blow external fuse recommended
Internal values
Typical ESR 0.1-0.2Ω, see Figure 12
48Vin, no load
Figure 4
Figure 4
Figure 4
Over sample, line, load, temperature & life
20MHz bandwidth; Figures 12 & 15
Full Load, see Figures 12 & 15
Full Load, see Figures 12 & 15
Subject to thermal derating; Figures 5 - 8
Output Voltage 10% Low; Figure 16
% of rated output current
Negative current drawn from output
12Vout at 20A Resistive Load
DYNAMIC CHARACTERISTICS
Output Voltage during Load Current Transient
For a Step Change in Output Current (0.1A/µs)
Settling Time
Turn-On Transient
Turn-On Time
Start-Up Inhibit Time
Output Voltage Overshoot
EFFICIENCY
100% Load
50% Load
200
100
mV
µs
50% to 75% to 50% Iout max; Figure 11
To within 1% Vout nom
500
2
5
µs
ms
%
Full load, Vout=90% nom.; Figures 9 & 10
-40°C to +125°C; Figure E
5,000 µF load capacitance, Iout = 0A
96.5
96.3
%
%
Figure 1
Figure 1
125
125
125
°C
°C
°C
Package rated to 150°C
UL rated max operating temp 130°C
See Figures 5 - 8 for derating curves
470
V
MΩ
pF
TEMPERATURE LIMITS FOR POWER DERATING CURVES
Semiconductor Junction Temperature
Board Temperature
Transformer Temperature
ISOLATION CHARACTERISTICS
Isolation Voltage (dielectric strength)3
Isolation Resistance
Isolation Capacitance4
2000
30
Note 1: UL's product certification tests were carried out using 20A fast blow fuse. Fuse interruption characteristics have to be taken into account while
designing input traces. User should ensure that Input trace is capable of withstanding fault currents until fuse blows.
Note 2: For applications requiring reduced output voltage ripple and noise, consult SynQor applications support (e-mail: [email protected])
Note 3: For modules with isolation voltage rating of 2250V, order the Feature Set option C. See last page for ordering details.
Note 4: Higher values of isolation capacitance can be added external to the module.
Product # BQ50120QTA20
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 3
Input:
Output:
Current:
Package:
Technical Specification
42-53 V
12 V
20 A
Quarter-brick
ELECTRICAL CHARACTERISTICS (Continued)
Parameter P
FEATURE CHARACTERISTICS
Switching Frequency
ON/OFF Control (Option P)
Off-State Voltage
On-State Voltage
ON/OFF Control (Option N)
Off-State Voltage
On-State Voltage
Output Over-Voltage Protection
Over-Temperature Shutdown
Over-Temperature Shutdown Restart Hysteresis
Load Current Scale Factor
Min.
Typ.
Max.
Units
127.5
150
172
kHz
-1.0
2.4
0.8
18
V
V
2.4
-1.0
18
0.8
V
V
V
°C
°C
13.75
120
10
800
RELIABILITY CHARACTERISTICS
Calculated MTBF (Telcordia)
Calculated MTBF (MIL-217)
Field Demonstrated MTBF
Notes & Conditions
Figure B
Figure B
Over full temp range; no load
Average PCB Temperature
See App Note: Output Load Current Calc.
106 Hrs. TR-NWT-000332; 100% load,300LFM, 40oC Ta
106 Hrs. MIL-HDBK-217F; 100% load, 300LFM, 40oC Ta
106 Hrs. See our website for details
2.7
2.0
STANDARDS COMPLIANCE
Parameter P
Notes
STANDARDS COMPLIANCE
UL/cUL 60950-1
EN60950-1
72/23/EEC
93/68/EEC
Needle Flame Test (IEC 695-2-2)
IEC 61000-4-2
GR-1089-CORE
File # E194341, Basic insulation & pollution degree 2
Certified by TUV
Test on entire assembly; board & plastic components UL94V-0 compliant
ESD test, 8kV - NP, 15kV air - NP (Normal Performance)
Section 7 - electrical safety, Section 9 - bonding/grounding
• An external input fuse must always be used to meet these safety requirements. Contact SynQor for official safety
certificates on new releases or download from the SynQor website.
QUALIFICATION TESTING
Parameter P
QUALIFICATION TESTING
Life Test
Vibration
Mechanical Shock
Temperature Cycling
Power/Thermal Cycling
Design Marginality
Humidity
Solderability
# Units
32
5
5
10
5
5
5
15 pins
Test Conditions
95% rated Vin and load, units at derating point, 1000 hours
10-55Hz sweep, 0.060” total excursion,1 min./sweep, 120 sweeps for 3 axis
100g minimum, 2 drops in x and y axis, 1 drop in z axis
-40°C to 100°C, unit temp. ramp 15°C/min., 500 cycles
Toperating = min to max, Vin = min to max, full load, 100 cycles
Tmin-10°C to Tmax+10°C, 5°C steps, Vin = min to max, 0-105% load
85°C, 85% RH, 1000 hours, 2 minutes on and 6 hours off
MIL-STD-883, method 2003
• Extensive characterization testing of all SynQor products and manufacturing processes is performed to ensure that we
supply robust, reliable product. Contact the factory for official product family qualification documents.
OPTIONS
PATENTS
SynQor provides various options for Logic Sense, Pin Length and
Feature Set for this family of DC/DC converters. Please consult the
last page for information on available options.
SynQor is protected under various patents, including but not limited to U.S. Patent numbers 5,999,417; 6,222,742 B1;
6,594,159 B2; 6,545,890 B2.
Product # BQ50120QTA20
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 4
Input:
Output:
Current:
Package:
100
10
98
9
96
8
Power Dissipation (W)
Efficiency (%)
Technical Specification
94
92
90
88
86
42 Vin
84
48 Vin
82
4
6
8
10
12
14
16
6
5
4
3
42 Vin
2
48 Vin
52 Vin
0
80
2
7
1
52 Vin
0
18
0
20
2
4
6
8
10
12
14
16
18
20
Load Current (A)
Load Current (A)
Figure 1: Efficiency at nominal output voltage vs. load current for minimum, nominal, and maximum input voltage at 25°C.
Figure 2: Power dissipation at nominal output voltage vs. load current
for minimum, nominal, and maximum input voltage at 25°C.
15
98
14
Output Voltage (V)
97
Efficiency (%)
42-53 V
12 V
20 A
Quarter-brick
96
95
94
13
12
11
10
42Vin
25 C
93
9
40 C
55 C
92
0
100
200
300
400
48Vin
52Vin
8
500
0
Air Flow (LFM)
2
4
6
8
10
12
14
16
18
20
Load Current (A)
Figure 3: Efficiency at nominal output voltage and 60% rated power vs.
airflow rate for ambient air temperatures of 25°C, 40°C, and 55°C
(nominal input voltage).
Figure 4: Output voltage regulation vs. load current for minimum, nominal, and maximum input voltage at 25°C.
20
18
16
Iout (A)
14
12
10
8
400 LFM (2.0 m/s)
6
300 LFM (1.5 m/s)
4
200 LFM (1.0 m/s)
100 LFM (0.5 m/s)
2
0 LFM (0 m/s)
0
0
25
40
55
70
Semiconductor junction temperature is
within 1°C of surface temperature
85
Ambient Air Temperature (oC)
Figure 5: Maximum output power derating curves vs. ambient air temperature for airflow rates of 0 LFM through 400 LFM with air flowing
from pin 3 to pin 1 (nominal input voltage).
Product # BQ50120QTA20
Phone 1-888-567-9596
Figure 6: Thermal plot of converter at 20 amp load current (240W)
with 55°C air flowing at the rate of 200 LFM. Air is flowing across the
converter from pin 3 to pin 1 (nominal input voltage).
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 5
Input:
Output:
Current:
Package:
Technical Specification
42-53 V
12 V
20 A
Quarter-brick
20
18
16
Iout (A)
14
12
10
8
400 LFM (2.0 m/s)
6
300 LFM (1.5 m/s)
4
200 LFM (1.0 m/s)
100 LFM (0.5 m/s)
2
0 LFM (0 m/s)
0
0
25
40
55
70
85
Semiconductor junction temperature is
within 1°C of surface temperature
Ambient Air Temperature (oC)
Figure 7: Maximum output power derating curves vs. ambient air temperature for airflow rates of 0 LFM through 400 LFM with air flowing
from input to output (nominal input voltage).
Figure 8: Thermal plot of converter at 20 amp load current (240W)
with 55°C air flowing at the rate of 200 LFM. Air is flowing across the
converter from input to output (nominal input voltage).
Figure 9: Turn-on transient at full load (resistive load) (2 ms/div).
Ch 1: Vout (5V/div); Ch 2: ON/OFF Pin (5V/div).
Figure 10: Turn-on transient at zero load (2 ms/div).
Ch 1: Vout (5V/div); Ch 2: ON/OFF Pin (5V/div).
See Fig. 14
10 µH
source
impedance
See Fig. 13
See Fig. 15
iS
VSOURCE
iC
DC/DC
Converter
47 µF,
<1Ω ESR
electrolytic
capacitor
Figure 11: Output voltage response to step-change in load current (50%-75%50% of Iout(max); dI/dt = 0.1A/µs). Load cap: 15µF, 100 mΩ ESR tantalum cap
and 1µF ceramic cap. Top trace: Vout (200mV/div), Bottom trace: Iout (5A/div).
Product # BQ50120QTA20
Phone 1-888-567-9596
VOUT
1 µF
15 µF,
ceramic 450mΩ ESR
capacitor
tantalum
capacitor
Figure 12: Test set-up diagram showing measurement points for Input
Terminal Ripple Current (Figure 13), Input Reflected Ripple Current
(Figure 14) and Output Voltage Ripple (Figure 15).
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 6
Input:
Output:
Current:
Package:
Technical Specification
Figure 13: Input Terminal Ripple Current, ic, at full rated output current and nominal input voltage with 10µ H source impedance and 47µ F
electrolytic capacitor (100 mA/div). See Figure 12.
42-53 V
12 V
20 A
Quarter-brick
Figure 14: Input reflected ripple current, is, through a 10 µ H source
inductor at nominal input voltage and rated load current (5 mA/div).
See Figure 12.
14
Output Voltage (V)
13
12
11
10
43V
48V
9
53V
8
0
5
10
15
20
25
Load Current (A)
Figure 15: Output voltage ripple at nominal input voltage and rated
load current (20 mV/div). Load capacitance: 1µ F ceramic capacitor
and 15µ F tantalum capacitor. Bandwidth: 20 MHz. See Figure 12.
Figure 16: Output voltage vs. load current showing typical current limit
curves and converter shutdown points.
Figure 17: Load current (20A/div) as a function of time when the converter attempts to turn on into a 1 mΩ short circuit. Top trace
(200µs/div) is an expansion of the on-time portion of the bottom trace.
Product # BQ50120QTA20
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 7
Input:
Output:
Current:
Package:
Technical Specification
BASIC OPERATION AND FEATURES
With voltages dropping and currents rising, the economics of an
Intermediate Bus Architecture (IBA) are becoming more attractive,
especially in systems requiring multiple low voltages. IBA systems
separate the role of isolation and voltage scaling from regulation
and sensing. The BusQor series bus converter provides isolation
and a coarse voltage step down in one compact module, leaving
regulation to simpler, less expensive non-isolated converters.
In Figure A below, the BusQor module provides the isolation
stage of the IBA system. The isolated bus then distributes power
to the non-isolated buck regulators to generate the required voltage levels at the point of load. In this case, the bucks are represented with SynQor’s NiQor series of non-isolated dc/dc converters. In many applications requiring multiple low voltage outputs, significant savings can be achieved in board space and
overall system costs.
When designing an IBA system with bus converters, the designer
can select from a variety of bus voltages. While there is no universally ideal bus voltage, most designs employ one of the following: 12V, 9V, 7.5V, 5V, or 3.3V. Higher bus voltages can
lead to lower efficiency for the buck regulators but are more efficient for the bus converter and provide lower board level distribution current. Lower bus voltages offer the opposite trade offs.
42-53 V
12 V
20 A
Quarter-brick
with the input voltage range of the non-isolated converters being
employed.
The BusQor architecture is very scalable, meaning multiple bus
converters can be connected directly in parallel to allow current
sharing for higher power applications.
CONTROL FEATURES
REMOTE ON/OFF (Pin 2): The ON/OFF input, Pin 2, permits
the user to control when the converter is on or off. This input is
referenced to the return terminal of the input bus, Vin(-). There
are two versions of the converter that differ by the sense of the
logic used for the ON/OFF input.
In the positive logic version, the ON/OFF input is active high
(meaning that a high turns the converter on). In the negative
logic version, the ON/OFF signal is active low (meaning that a
low turns the converter on). Figure B is a detailed look of the
internal ON/OFF circuitry. Positive logic enabled modules have
N-channel FET populated. Negative logic enabled modules have
P-channel FET populated.
Vin+
Control
N-channel FET
P-channel FET
SynQor’s 12Vout BusQor module acts as a true dc transformer.
The output voltage is proportional to the input voltage, with a
specified “turns ratio” or voltage ratio, plus minor drop from the
internal resistive losses in the module. When used in IBA systems, the output variation of the BusQor must be in accordance
Vref (8V)
30 kΩ
5 kΩ
13V
On/Off
100 kΩ
3.3 V
48Vdc
42-53V
BusQor
Vin-
2.5 V
Figure B: Internal ON/OFF pin circuitry
1.8 V
PROTECTION FEATURES
12Vdc
Converter
1.5 V
0.9 V
Typical User Board
NiQor
Loads
Converters
48Vdc
Front
End
Figure A: Example of Intermediate Bus Architecture using
BusQor bus converter and NiQor non-isolated converters
Product # BQ50120QTA20
Phone 1-888-567-9596
Input Under-Voltage Lockout: The converter is designed to
turn off when the input voltage is too low, helping avoid an input
system instability problem, described in more detail in the application note titled “Input System Instability” available on the
SynQor website. The lockout circuitry is a comparator with DC
hysteresis. When the input voltage is rising, it must exceed the
typical Turn-On Voltage Threshold value (listed on the specification page) before the converter will turn on. Once the converter
is on, the input voltage must fall below the typical Turn-Off
Voltage Threshold value before the converter will turn off. Also
see Figure E.
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 8
Input:
Output:
Current:
Package:
Technical Specification
Output Current Limit: The output of the BusQor module is
electronically protected against output overloads. When an overload current greater than the “DC Current-Limit Inception” specification is drawn from the output, the output shuts down to zero
volt in a period of 40µs typical (see Figure C). The shutdown
period lasts for a typical period of 250ms (Figure D) after which
the BusQor tries to power up again. If the overload persists, the
output voltage will go through repeated cycles of shutdown and
restart with a duty cycle of 40µs (On) and 250ms (Off) respectively. The BusQor module returns (auto resetting) to normal operation once the overload is removed. The BusQor is designed to
survive in this mode indefinitely without damage and without
human intervention.
Output
Current
42-53 V
12 V
20 A
Quarter-brick
the short circuit persists, the output voltage will go through repeated cycles of shutdown and restart with a duty cycle of 350µs
(On) and 250ms (Off) respectively. The BusQor module returns
(auto resetting) to normal operation once the short circuit is
removed. The BusQor is designed to survive in this mode indefinitely without damage and without human intervention.
In the Auto resetting mode, also referred to as “Hiccup” mode,
the power drawn from the 48V input is about 5 Watts, most of
which is dissipated into the external fault. It is important that copper traces and pads from the output circuit be designed to withstand the short term peaks, although the average current into the
fault may be as low as 50mA typical. See Figure 17 for appropriate waveform.
Over-Temperature Shutdown: A temperature sensor on the
converter senses the average temperature of the module. The
thermal shutdown circuit is designed to turn the converter off
when the temperature at the sensed location reaches the OverTemperature Shutdown value. It will allow the converter to turn
on again when the temperature of the sensed location falls by the
amount of the Over-Temperature Shutdown Restart Hysteresis
value.
25A
20A
Output
Voltage
12V
APPLICATION CONSIDERATIONS
0V
40µs
Time
Figure C: Output Overload protection diagram (not to scale)
Output Short Circuit Protection: When the output of the
BusQor module is shorted, a peak current of typically 40 A will
flow into the short circuit for a period of about 300µs. The output of the BusQor will shutdown to zero volts for the same period
(Figure D). The shutdown period lasts for a period of 250ms, at
the end of which the BusQor module tries to power up again. If
Output
Current
40A peak
Start-Up Inhibit Period: Figure E details the Start-Up Inhibit
Period for the BusQor module. At time t0, when Vin is applied
with On/Off pin asserted (enabled), the BusQor output begins to
build up. Before time t1, when the input voltage is below the UVL
threshold, the unit is disabled by the Input Under-Voltage Lockout
feature. When the input voltage rises above the UVL threshold,
the Input Under-Voltage Lockout is released, and a typical Startup
Inhibit Period of 350µs is initiated. The output builds up to 90%
or higher of the nominal voltage and stabilizes at the nominal
value of 12V in a period of 420µs typical. The rise time from 0V
to 90% is 70µs typical.
At time t2, when the On/Off pin is de-asserted (disabled), the
BusQor output instantly drops to 0V. Fall time from 12V to 0V is
dependent on output capacitance and any parasitic trace inductance in the output load circuit.
Output
Voltage
At time t3, when the On/Off pin is re-asserted (enabled), the
BusQor module output begins to build up after the inhibit period
of 350µs typical.
<12V
Refer to the Control Features section of the data sheet for details
on enabling and disabling methods for N and P logic type modules.
0V
Time
250ms
300µs
Figure D: Output Short Circuit and Auto-Resetting protection
diagram (not to scale)
Product # BQ50120QTA20
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 9
Input:
Output:
Current:
Package:
Technical Specification
42-53 V
12 V
20 A
Quarter-brick
For applications that require mounting parts BELOW the BusQor
module, one should be aware of potential high levels of electromagnetic interference, in addition to safety keep out. Users are
advised to consult SynQor Applications engineering in such
applications.
Vin
UVLO
Copper Keep Out Area: Keep out areas shown in Figure F are
to be observed for Top layer copper traces and vias. Internal layers buried one or more layers may be exempt, depending on the
PCB material grade and thickness. Users are advised to consult
UL standards for details.
On/Off
(N logic)
OFF
ON
t0
t1
t2
t3
t
Vout
12V
Time
16ms
2ms
16.1ms
Figure E: Power Up/Down Diagram (not to scale) showing
Start-Up Inhibit Period.
Keep Out Areas:
Component Keep Out Area: Keep out areas for components not
referenced to the Primary circuit are shown in shaded areas in
Figure F. The keep out areas shown are consistent with UL's
requirements for Basic Insulation of 0.04" (40 mils) for Pollution
degree 2. User should consult UL standards for other insulation
classes and operating environments.
0.01”
0.023”
All layers including top and bottom, are subject to the keep out
areas shown around Primary pins of BusQor module. Actual
keep outs along the surface (Creepage) may vary depending on
the PCB material CTI. Users are advised to consult UL standards
for details.
Bridging Components: Bridging components like EMI filter
capacitors required to be placed as close as possible to the
BusQor module for optimum performance must observe the clearance/creepage requirements of 0.04"(40 mils) between pads to
maintain compliance to UL standards for the overall power system.
Note: Referenced keep out widths are adequate to withstand
UL's Basic Insulation Dielectric strength tests for approved PCB
materials. Applications requiring Double or Reinforced insulation
must double the keep out widths shown in Figure F. Keep out
areas shown have standard margins above UL's minimum
requirements.
Output Load Current Calculation: The BusQor series
allows the converter output load to be measured without adding
a current loop or external shunt resistor to the designer’s PCB
board under test. On the top side of the BusQor converter is a
current sense resistor as shown in Figure G. The output load current is proportional to the voltage drop across this sense resistor.
This calculation is detailed below.
A current sense resistor referenced to the primary input is used in
the equation below to calculate the output load current.
Iload = (VRsense(load) - VRsense(no load) ) x 800
Bridging
Capacitor
0.01”
where:
1.50”
Primary
Iload = output load current
Secondary
VRsense(load) = voltage across the sense resistor with
Figure F: Keep Out Areas for BusQor module
converter under load
VRsense(no load) = voltage across the sense resistor with
converter at zero load
Product # BQ50120QTA20
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 10
Input:
Output:
Current:
Package:
Technical Specification
The voltage drop across the sense resistor is about 25mV at full
load of 20A. Therefore, proper measuring techniques must be
used to ensure accuracy. A calibrated DMM set to 300mV is
acceptable. Since this measurement is done on the Primary area
of the converter, a slight non-linearity may be observed over the
load current range. Using the Scale Factor referenced above, the
error may be on the order of 4%. For more detailed information
consult the application note on SynQor’s website titled “Output
Load Current Calculations”.
for further assistance on PCB trace design.
The current share performance of two paralleled modules is illustrated in the graph in Figure J. In this graph the percent deviation from ideal sharing (50%) is plotted for each module versus
the total output load current at 48Vin.
Deviation from 50/50 Sharing (%)
The number 800 is a “Load Current Scale Factor” for this product, valid only for Vin = 48V. Hence, measurement should be
made at this input voltage.
42-53 V
12 V
20 A
Quarter-brick
10%
8%
6%
4%
2%
0%
-2%
-4%
Module 1
-6%
Module 2
-8%
5
10
15
20
25
30
35
40
Total Load Current (A)
Figure J: Current share performance of 2 paralleled modules
Figure G: Location of Sense Resistors
Current Sharing: BusQor modules are designed to operate in
parallel without the use of any external current share circuitry. A
typical circuit for paralleling two BusQor modules is shown in
Figure H. An output capacitor is recommended across each module and located close to the converter for optimum filtering and
noise control performance. Dedicated input inductors are recommended but are considered optional. Input capacitors must be
located close to the converter module. PCB layout in the input
circuit should be such that high frequency ripple currents of each
module is restricted to a loop formed by the input capacitors and
the input terminals of the BusQor module. See Figure K for
details on PCB layout. Contact SynQor application engineering
1
BusQor module
CM EMI
filter
Bulk
Cap
BusQor module
(Not shown
in Figure H)
Input LC filters
Figure K: Recommended PCB layout for input circuit
5
BusQor module
(N logic option)
Vin
48Vin
12Vout
40A
2
3
4
1
5
BusQor module
(N logic option)
2
3
4
Figure H: BusQor Output Paralleling for increased current output.
Product # BQ50120QTA20
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 11
Input:
Output:
Current:
Package:
Technical Specification
42-53 V
12 V
20 A
Quarter-brick
PART NUMBERING SYSTEM
ORDERING INFORMATION
The part numbering system for SynQor’s BusQor DC bus converters follows the format shown in the example below.
The tables below show the valid model numbers and ordering
options for converters in this product family. When ordering
SynQor converters, please ensure that you use the complete
15 character part number consisting of the 12 character base
part number and the additional 3 characters for options. To
order 6/6 RoHS compliant product please add a “-G” suffix.
BQ 50 120 Q T A 20 N N S
Options (see
Ordering Information)
Output Current
Thermal Design
Performance Level
Package Size
Output Voltage
Model Number
Input Voltage
BQ55090QTA27xyz
BQ50120QTA20xyz
BQ50120QTA25xyz
36 - 55 V
42 - 53 V
42 - 53 V
Output Max Output
Voltage Current
9.6 V
27 A
12 V
20 A
12 V
25 A
The following option choices must be included in place of the
x y z spaces in the model numbers listed above.
Input Voltage
Product Family
Options Description: x y z
The first 12 characters comprise the base part number and the
last 3 characters indicate available options. Although there
are no default values for enable logic and pin length, the most
common options are negative logic and 0.145” pins. These
part numbers are more likely to be readily available in stock
for evaluation and prototype quantities. A “-G” suffix indicates 6/6 RoHS compliance.
Application Notes
A variety of application notes and technical white papers can
be downloaded in pdf format from our website.
Enable
Logic
Pin
Length
Feature
Set
K - 0.110"
S - Standard
P - Positive N - 0.145"
C - no common
N - Negative R - 0.180"
mode capacitor
Y - 0.250"
Units with option C for the Feature Set are a standard unit with
the common mode capacitor removed. The isolation voltage
rating of the C option unit is 2250Vdc.
RoHS Compliance: The EU led RoHS (Restriction of Hazardous
Substances) Directive bans the use of Lead, Cadmium,
Hexavalent Chromium, Mercury, Polybrominated Biphenyls
(PBB), and Polybrominated Diphenyl Ether (PBDE) in Electrical
and Electronic Equipment. This SynQor product is available as
5/6 RoHS compliant (product with lead) or 6/6 RoHS compliant.
For more information please refer to SynQor’s RoHS addendum
available at our RoHS Compliance / Lead Free Initiative web
page or e-mail us at [email protected].
Contact SynQor for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
Product # BQ50120QTA20
978-849-0600
888-567-9596
978-849-0602
[email protected]
www.synqor.com
155 Swanson Road
Boxborough, MA 01719
USA
Phone 1-888-567-9596
Warranty
SynQor offers a three (3) year limited warranty. Complete warranty
information is listed on our website or is available upon request from
SynQor.
Information furnished by SynQor is believed to be accurate and reliable.
However, no responsibility is assumed by SynQor for its use, nor for any
infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any
patent or patent rights of SynQor.
www.synqor.com
Doc.# 005-2BQ512J Rev. E
03/17/06
Page 12
Similar pages