BT302 0.5-4.0 GHz 1W High Power Amplifier Device Features • • • • • +5V/215mA at operating bias condition Gain = 16.0 dB @ 2400MHz P1dB = 29.5 dBm @ 2400MHz OIP3 = 42.1dBm 16dBm/tone at 2400MHz LTE 20M ACLR = 19.1dBm Output Power at -50dBc @ 2400MHz • Lead-free/Green/RoHS-compliant SOT89 SMT package Typical Performance1 Product Description The BT302 is a high performance and a high dynamic range amplifier in a low cost surface mount package(SOT-89) with a RoHScompliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP/GaAs technology. This device is designed for use where high linearity is required and features high ACLR and P1 performance with low consumption current(215mA) and requires a few external matching components, DC blocking capacitors on the In/Output pin and a bypass capacitor and a RF choke for the out port. Applications • Base station /Repeaters Infrastructure/Small Cell • Commercial/Industrial/Military wireless system • LTE / WCDMA /CDMA Wireless Infrastructure Parameter Frequency 915 1960 Unit 2140 2400 2600 16.0 3500 MHz Gain 22.0 17.5 17.0 15.3 13.2 dB S11 -27.5 -19.5 -19.4 -32.8 -22.6 -22.7 dB -13.0 -11.5 -17.3 -14.0 -14.8 -19.5 dB 41.8 29.5 41.5 29.6 41.8 29.3 42.1 29.5 41.3 29.5 40.8 29.2 dBm dBm LTE 20M ACLR 18.5 19.1 19.1 19.1 19.2 18.5 dBm WCDMA ACLR 19.2 Noise Figure 4.1 19.5 4.1 19.4 4.2 19.2 4.2 19.3 4.2 18.5 4.3 dBm dB S22 2 OIP3 P1dB 1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω OIP3 _ measured on two tones with a output power 16dBm/ tone , F2—F1 = 1 MHz.. 2 *ACLR Channel Power measured at -50dBc. - LTE set-up: 3GPP LTE, FDD E-TM3.1, 20MHz BW, ±5MHz offset, PAR 9.75 @0.01% Prob. - WCDMA set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 9.78 at 0.01% Prob. Min. Bandwidth Icq @ (Vcc&Vbias=5V) VCC/Vbias RTH 500 195 Typical 215 5.0 19.5 Max. Unit 4000 235 MHz mA V °C/W Application Circuits Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature *External matching circuit: Refer to application circuit for each frequency. BeRex Operating Voltage Supply Current Input RF Power Rating -40 to +105 -55 to +155 220 Unit °C °C °C +6.0 550 24 V mA dBm *Operation of this device above any of these parameters may result in permanent damage. ●website: www.berex.com ●email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier V-I Characteristics Typical Device Data S-parameters (Vc=5V, Ic=215mA, T=25°C) BeRex ●website: www.berex.com ●email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier S-Parameter (Vdevice = 5.0V, Ic = 215mA, T = 25 °C, calibrated to device leads) Freq [MHz] 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 BeRex S11 [Mag] S11 [Ang] 0.91 0.91 0.92 0.92 0.92 0.93 0.93 0.93 0.93 0.93 0.94 0.94 0.94 0.94 0.94 0.94 0.95 0.94 0.94 0.95 0.94 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.96 0.96 172.90 170.31 168.00 165.60 163.61 161.62 159.83 158.14 156.58 154.90 153.12 151.63 150.34 148.55 146.83 145.20 143.19 141.46 139.38 136.88 135.06 132.76 130.47 127.90 125.20 122.86 119.89 116.94 114.13 111.26 108.49 105.74 102.74 100.24 97.55 95.01 S21 [Mag] 6.65 6.23 5.84 5.47 5.10 4.76 4.45 4.18 3.96 3.77 3.57 3.43 3.26 3.14 3.01 2.89 2.79 2.69 2.59 2.52 2.44 2.40 2.34 2.31 2.29 2.27 2.23 2.13 2.11 2.05 1.98 1.92 1.86 1.83 1.76 1.71 ●website: www.berex.com S21 [Ang] S12 [Mag] 135.78 129.10 123.25 117.61 112.46 108.08 104.06 100.16 96.31 93.11 89.90 86.54 83.68 80.43 77.25 74.02 71.03 68.15 65.72 63.57 60.76 58.88 56.69 53.61 50.59 47.41 44.51 40.75 36.73 33.66 30.66 27.79 25.27 22.61 20.97 17.13 0.015 0.015 0.015 0.016 0.016 0.016 0.016 0.016 0.017 0.017 0.018 0.018 0.018 0.019 0.019 0.019 0.019 0.020 0.020 0.020 0.021 0.022 0.022 0.023 0.024 0.025 0.025 0.025 0.026 0.026 0.026 0.027 0.027 0.027 0.028 0.027 S12 [Ang] 11.72 10.72 11.65 11.53 11.72 13.86 14.48 14.53 14.31 14.97 14.61 15.01 14.36 15.13 14.47 13.74 12.40 13.77 14.15 13.40 12.19 12.17 13.21 12.11 9.70 9.36 9.71 6.11 5.00 4.11 1.98 1.21 0.57 -0.77 -2.34 -5.09 S22 [Mag] 0.70 0.69 0.69 0.69 0.69 0.69 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.69 0.69 0.69 0.69 0.69 0.69 0.68 0.68 0.68 0.69 0.69 0.69 0.69 0.69 0.69 0.70 0.70 0.71 0.71 0.72 ●email: [email protected] S22 [Ang] 173.01 171.51 170.18 169.26 168.35 167.44 166.46 165.67 164.94 164.19 163.57 162.55 161.77 160.93 160.22 159.29 158.14 156.91 155.94 154.78 153.38 151.92 150.86 149.05 147.56 145.83 144.11 142.53 140.79 139.25 137.21 135.77 134.23 132.66 131.13 129.78 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Application Circuit: 915 MHz Schematic Diagram C3 BOM C2 Vcc C1 L1 RFin C4 RFout C6 U1 L3 L2 C5 C7 Remark C1 1206 10uF C2 0603 1nF C3 0603 100pF C4 0603 100pF C5 0603 100pF C6 0603 6pF C7 0603 4.7pF L1 0805 39nH L2 0603 2.7nH L3 0603 2.7nH U1 Note: SOT89 BT302 Coil 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt ind(L3) and the input pin of BT302 - 5.0mm. 3. Distance between the edge of the series ind(L2) and the output pin of BT302 - 3.3mm. 4. Distance between the edge of the shunt cap(C7) and the output pin of BT302 - 5.6mm. Figure about the reference position of components BeRex ●website: www.berex.com ●email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA BeRex ●website: www.berex.com ●email: [email protected] 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA 3GPP WCDMA 1FA ACLR (–50dBc) BeRex ●website: www.berex.com 3GPP LTE TM3.1 20MHz ACLR (–50dBc) ●email: [email protected] 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Application Circuit: 1960 MHz Schematic Diagram C3 BOM C2 Vcc C1 L1 RFin C4 RFout C6 U1 C5 C7 C8 Remark C1 1206 10uF C2 0603 1nF C3 0603 100pF C4 0603 100pF C5 0603 100pF C6 0603 2.7pF C7 0603 3.5pF C8 0603 2pF L1 0805 27nH U1 SOT89 BT302 Coil Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt ind(C7) and the input pin of BT302 - 5.0mm. 3. Distance between the edge of the shunt cap(C8) and the output pin of BT302 - 3.6mm. Figure about the reference position of components BeRex ●website: www.berex.com ●email: [email protected] 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA BeRex ●website: www.berex.com ●email: [email protected] 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA 3GPP WCDMA 1FA ACLR (–50dBc) BeRex ●website: www.berex.com 3GPP LTE TM3.1 20MHz ACLR (–50dBc) ●email: [email protected] 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Application Circuit: 2140 MHz Schematic Diagram C3 BOM C2 Vcc C1 L1 RFin C4 RFout C6 U1 C5 C7 C8 Remark C1 1206 10uF C2 0603 1nF C3 0603 100pF C4 0603 100pF C5 0603 100pF C6 0603 2pF C7 0603 2.5pF C8 0805 1.5pF L1 0603 20nH U1 SOT89 BT302 Coil Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt ind(C7) and the input pin of BT302 - 5.6mm. 3. Distance between the edge of the shunt cap(C8) and the output pin of BT302 - 3.3mm. Figure about the reference position of components BeRex ●website: www.berex.com ●email: [email protected] 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA BeRex ●website: www.berex.com ●email: [email protected] 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA 3GPP WCDMA 1FA ACLR (–50dBc) BeRex ●website: www.berex.com 3GPP LTE TM3.1 20MHz ACLR (–50dBc) ●email: [email protected] 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Application Circuit: 2400 MHz Schematic Diagram C3 BOM C2 Vcc C1 L1 RFin C4 RFout C6 U1 C5 C7 C8 Remark C1 1206 10uF C2 0603 1nF C3 0603 100pF C4 0603 100pF C5 0603 100pF C6 0603 1.5pF C7 0603 2.2pF C8 0603 1.2pF L1 0805 18nH U1 SOT89 BT302 Coil Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt ind(C7) and the input pin of BT302 - 4.5mm. 3. Distance between the edge of the shunt cap(C8) and the output pin of BT302 - 3.0mm. Figure about the reference position of components BeRex ●website: www.berex.com ●email: [email protected] 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA BeRex ●website: www.berex.com ●email: [email protected] 14 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA 3GPP WCDMA 1FA ACLR (–50dBc) BeRex ●website: www.berex.com 3GPP LTE TM3.1 20MHz ACLR (–50dBc) ●email: [email protected] 15 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Application Circuit: 2600 MHz Schematic Diagram C3 BOM C2 Vcc C1 L1 RFin C4 RFout C6 U1 C5 C7 C8 Remark C1 1206 10uF C2 0603 1nF C3 0603 100pF C4 0603 100pF C5 0603 100pF C6 0603 1.2pF C7 0603 2pF C8 0603 1.2pF L1 0805 12nH U1 SOT89 BT302 Coil Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt ind(C7) and the input pin of BT302 - 3.6mm. 3. Distance between the edge of the shunt cap(C8) and the output pin of BT302 - 0.8mm. Figure about the reference position of components BeRex ●website: www.berex.com ●email: [email protected] 16 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA BeRex ●website: www.berex.com ●email: [email protected] 17 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA 3GPP WCDMA 1FA ACLR (–50dBc) BeRex ●website: www.berex.com 3GPP LTE TM3.1 20MHz ACLR (–50dBc) ●email: [email protected] 18 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Application Circuit: 3500 MHz Schematic Diagram C3 BOM C2 Vcc C1 L1 RFin C4 RFout C6 U1 C5 C7 C8 Remark C1 1206 10uF C2 0603 1nF C3 0603 100pF C4 0603 100pF C5 0603 100pF C6 0603 0.3pF C7 0603 0.5pF C8 0603 0.75pF L1 0805 18nH U1 SOT89 BT302 Coil Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt cap(C7) and the input pin of BT302 - 6.7mm. 3. Distance between the edge of the shunt cap(C8) and the output pin of BT302 - 0.4mm. Figure about the reference position of components BeRex ●website: www.berex.com ●email: [email protected] 19 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA BeRex ●website: www.berex.com ●email: [email protected] 20 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Typical Performance Vc = 5V, Ic = 215mA 3GPP WCDMA 1FA ACLR (–50dBc) BeRex ●website: www.berex.com 3GPP LTE TM3.1 20MHz ACLR (–50dBc) ●email: [email protected] 21 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier PCB Land Pattern PCB Mounting Note : All dimension _ millimeters PCB lay out _ on BeRex website BeRex ●website: www.berex.com ●email: [email protected] 22 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B BT302 0.5-4.0 GHz 1W High Power Amplifier Package Marking Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 YY = Year, WW = Working Week, XX = Wafer No. Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Class 1C Value: Passes <2000V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114B MSL Rating: Level 1 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ●website: www.berex.com ●email: [email protected] 23 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. B