BTE2000 / PTE2000 Series Precision stainless steel pressure transmitters FEATURES · 0...0.35 to 0...35 bar, 0...5 to 0...500 psi gage1 · For corrosive media in harsh environments · 1...6 V or 4...20 mA output · Field interchangeable · All welded stainless steel diaphragm construction MEDIA COMPATIBILITY Wetted materials: stainless steel 1.4404 (316) Housing: stainless steel 1.4305 (303), protection class IP 65 (according to DIN EN 60529) respectively NEMA 4X1 ELECTRICAL CONNECTION SPECIFICATIONS8,9 Maximum ratings 1...6 V output version Supply voltage (reverse polarity protection) 12...30 V BTE(M)/PTE2...G1... 12...36 V BTE(M)/PTE2...G4...2 Maximum load current BTE(M)/PTE2...G1... only Sensor 20 mA Temperature limits Storage Operating Media Compensated -55 to 100°C -40 to 100°C -40 to 125°C 0 to 70°C Humidity limits 0 - 100 %RH Vibration (5 to 500 Hz) Mechanical shock 2g 50 g 3 Proof pressure BTEM2350... PTE2005... all others December 2008 / 098 +Vs 1000 mbar 15 psi 2 x rated pressure 1 12 V to 30 V Vout 2 -Vs 4 GND V Case 3 4...20 mA output version +Vs 1 Sensor 12 V to 36 V V -Vs 4 RL GND Case 3 1/6 www.sensortechnics.com BTE2000 / PTE2000 Series Precision stainless steel pressure transmitters COMMON PERFORMANCE CHARACTERISTICS1 Characteristics Operating pressure Min. BTEM2350... BTE2001... BTE2002... BTE2005... BTE2010... BTE2020... BTE2025... BTE2035... PTE2005... PTE2015... PTE2030... PTE2100... PTE2300... PTE2500... Typ. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Repeatability Long term stability5 Output noise Non-linearity and hysteresis (BSL)6 Thermal effects4 (0 to 70°C) (combined offset and span) Unit 0.35 1 2 5 10 20 25 35 5 15 30 100 300 500 ±0.1 ±0.2 ±0.04 ±0.2 ±0.6 ±0.5 ±2.0 1 0.05 0.03 BTEM.../PTE2005... all others (-40 to 0°C, 70 to 100°C) Frequency response (10 to 90 %) Power supply rejection Offset Span Max. ±0.5 ±2.5 ±1.5 bar p si g %FSO ms %FSO/V INDIVIDUAL PERFORMANCE CHARACTERISTICS1 1...6 V output version (unless otherwise noted, VS = 15 V, tamb = 25°C, RL > 100 kOhm) Characteristics Zero pressure offset Full scale span Full scale output Output impedance Power consumption (no load) Min. Typ. Max. Unit 0.90 4.95 1.00 5.00 6.0 1.10 5.05 V 50 100 Ω mW 4...20 mA output version (unless otherwise noted, VS = 15 V, tamb = 25°C, RL = 100 Ohm) Characteristics Zero pressure offset Full scale span Full scale output Power consumption (IL = 20 mA) December 2008 / 098 Min. Typ. Max. Unit 3.9 15.9 4.0 16.0 20.0 260 4.1 16.1 mA mW 2/6 www.sensortechnics.com BTE2000 / PTE2000 Series Precision stainless steel pressure transmitters Specification notes: 1. IP 65 protection is given when the connector is locked. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. 2. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. 3. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. 4. Thermal effects tested and guaranteed from 0 to 70°C relative to 25°C. All specifications shown are relative to 25°C. 5. Long term stability is the change in output after one year or 1 million pressure cycles. 6. Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span. 7. Tests are in accordance with EN61000-6-2, April 1999. 8. CE-labelling is in accordance with 89/336/EEC. 9. The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC. ELECTROMAGNETIC CAPABILITY7 Test conditions Radiated, radio frequency electromagnetic field immunity (RFI) Electrical fast transient / burst immunity (EFT) Electrostatic discharge immunity test (ESD) Immunity to conducted disturbances induced by radio-frequency fields EN61000-4-3: EN61000-4-4: EN61000-4-2: EN61000-4-6: Criterion Interference A <1 % FSO B <1 % FSO B <1 % FSO A <1 % FSO Grade 3 10 V/m, 80 MHz to 1000 MHz 80 % AMC (1 kHz) Grade 3 ±2 kV Grade 4 ±8 kV, contact discharge Grade 3 0,15 to 80 MHz 10 V, 80 % AMC (1 kHz) OUTPUT CHARACTERISTIC 1...6 V output version 4...20 mA output version 20 6 Iout Vout 5 V 16 mA 4 12 3 8 2 4 1 0 20 December 2008 / 098 40 60 80 100 % full scale pressure 0 20 40 60 80 100 % full scale pressure 3/6 www.sensortechnics.com BTE2000 / PTE2000 Series Precision stainless steel pressure transmitters LOAD LIMITATION 4...20 mA output version 1200 Ohm 1000 800 600 operating range 400 200 0 10 20 30 V Vsupply RECOMMENDED ACCESSORY (included in delivery) ZK000101: Connector/cable assembly (different cable lenghts available) NOM 2 m PIN CONNECTION (other cable lenghts on request) 36.5 NOM 60 Shield Pin Flying lead end 1 Brown 2 Green 3 White and shield 4 Yellow Vent tube M12x1 Ø 20 December 2008 / 098 Note: For proper function of all gage devices the vent tube must have access to the ambient atmosphere. dimensions in mm 4/6 www.sensortechnics.com BTE2000 / PTE2000 Series Precision stainless steel pressure transmitters OUTLINE DRAWING Connector version 34.0 (1.34) 25.4 (1) NOM 56.0 (2.20) M12 x 1 NOM 70.0 (2.76) vent hole 4 1 3 2 3/8" NPT WARNING Do not touch diaphragm WARNING: Do not use case to tighten pressure connection Pin 1 2 3 4 mass: typ. 190 g OUTPUT 1...6 V 4...20 mA +Vs +Vs Vout NC Case Case -Vs -Vs Cable version 34.0 (1.34) 25.4 (1) NOM 73.0 (2.87) NOM 56.0 (2.20) 1 m SHIELDED CABLE 4 x 0.25 mm² 3/8" NPT WARNING Do not touch diaphragm mass: typ. 190 g December 2008 / 098 WARNING: Do not use case to tighten pressure connection OUTPUT Lead color 1...6 V 4...20 mA bare brown white green yellow shield +Vs NC Vout -Vs shield +Vs NC NC -Vs dimensions in mm (inches) 5/6 www.sensortechnics.com BTE2000 / PTE2000 Series Precision stainless steel pressure transmitters OPTIONAL PIPE FITTING DRAWINGS Thread Male Male T1 T2 Part No. SFIT62 SFIT64 SFIT68 3/8 NPT 3/8 NPT 3/8 NPT 1/8 NPT 1/4 NPT 1/8 BSP W Hex in. mm. in. mm. Maximum working pressure (psig) 3/4 3/4 3/4 1.27 1.45 1.45 32.3 37.0 37.0 0.56/0.38 0.56 0.56 14.2/9.7 14.2 14.2 7200 7200 7200 R D Material: stainless steel 316 ORDERING INFORMATION 1...6 V output Part number 4...20 mA output Operating pressure Connector version Cable version Connector version Cable version 0 - 0.35 bar 0 - 1 bar 0 - 2 bar 0 - 5 bar 0 - 10 bar 0 - 20 bar 0 - 25 bar 0 - 35 bar 0 - 5 psig 0 - 15 psig 0 - 30 psig 0 - 100 psig 0 - 300 psig 0 - 500 psig BTEM2350G1A BTE2001G1A BTE2002G1A BTE2005G1A BTE2010G1A BTE2020G1A BTE2025G1A BTE2035G1A PTE2005G1A PTE2015G1A PTE2030G1A PTE2100G1A PTE2300G1A PTE2500G1A BTEM2350G1C BTE2001G1C BTE2002G1C BTE2005G1C BTE2010G1C BTE2020G1C BTE2025G1C BTE2035G1C PTE2005G1C PTE2015G1C PTE2030G1C PTE2100G1C PTE2300G1C PTE2500G1C BTEM2350G4A BTE2001G4A BTE2002G4A BTE2005G4A BTE2010G4A BTE2020G4A BTE2025G4A BTE2035G4A PTE2005G4A PTE2015G4A PTE2030G4A PTE2100G4A PTE2300G4A PTE2500G4A BTEM2350G4C BTE2001G4C BTE2002G4C BTE2005G4C BTE2010G4C BTE2020G4C BTE2025G4C BTE2035G4C PTE2005G4C PTE2015G4C PTE2030G4C PTE2100G4C PTE2300G4C PTE2500G4C Note: Other pressure ranges and options are widely available. Please contact your nearest Sensortechnics sales representative. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. December 2008 / 098 6/6 www.sensortechnics.com