General-purpose CMOS Logic IC Series (BU4S,BU4000B Series) High Voltage CMOS Logic ICs <Logic Gate> BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV No.09050EAT03 ●Description BU4001B series ICs are 2-input positive logic NOR gates, each with four built-in circuits. A buffer achieved by an inverter added at the gate output improves the input / output propagation characteristics and minimizes variation in the propagation time caused by an increase in the load capacitance. BU4011B series ICs are 2-input positive logic NAND gates. Four circuits are contained on a single chip. An inverter-based buffer is included at the gate output, enabling improved input / output propagation characteristics, and an increased load capacitance minimizes fluctuations in the propagation time. BU4030B and BU4070B series ICs are exclusive OR gates, each with four built-in circuits. An inverter-based buffer was incorporated at the gate output for enhanced I/O voltage characteristics, and the load capacitance has been increased in order to minimize fluctuations in the propagation time. BU4081B series are 2-input positive logic AND gates with four circuits mounted on a single chip. An inverter-type buffer was added to the gate output, improving input/output transmission speed, and an increased load capacitance suppresses fluctuations in the transmission time. BU4093B series ICs are 4-circuit, 2-input NAND gates whose input pins all have a Schmitt trigger function. BU4069UB series ICs are 6-circuit inverters with no buffers. A single-stage gate configuration reduces propagation time. BU4584B series ICs are inverter-type Schmitt trigger circuits, each incorporating 6 circuits in a single chip. ●Features 1) Low power consumption 2) Broad operating supply voltage range: 3V to 16V 3) High input impedance 4) High fan out 5) L-TTL2 and LS-TTL1 inputs can be directly driven 6) All outputs are equipped with buffers (except for BU4069UB) ●Applications These products are suitable for applications requiring low power consumption and a high degree of noise tolerance The BU4030B/BU4070B series can be used in digital comparators and parity circuits The BU4093B series are suitable as line receivers, waveform shaping and multi-vibrators, etc. The BU4584B series can be used in waveform shaping circuits for inputs with a slow rise time and fall time ●Lineup High Voltage CMOS Logic Logic Gate www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 4 circuits NOR gate BU4001B/ BU4001F (Quad 2-input NOR gate) 4 circuits NAND gate BU4011B/ BU4011B F/ BU4011B FV (Quad 2-input NAND gate) 4 circuits EXOR gate BU4030B/ BU4030B F (Quad exclusive OR gate) 4 circuits EXOR gate BU4070B/ BU4070B F (Quad exclusive OR gate) 4 circuits AND gate 4 circuits NAND gate 6 circuits INV gate 6 circuits INV gate BU4081B/ BU4081F/ BU4081FV BU4093B/ BU4093B F/ BU4093B FV BU4069UB/ BU4069UB F/ BU4069UB FV BU4584B/ BU4584BF/ BU4584BFV 1 / 21 6 (Quad 2-input AND gate) (Quad 2-input NAND Schmitt trigger) (Hex inverter) (Hex Schmitt trigger inverter) 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Absolute Maximum Ratings Limit Parameter Symbol Power Supply Voltage Unit BU4030B BU4081B BU4093B BU4069UB BU4584B /BU4070B -0.3 to 18 V BU4001B BU4011B VDD Supply current Iin ±10 mA Operating temperature Topr -40 to 85 ℃ Storage temperature Tstg -55 to 150 ℃ VIN Tjmax -0.3 to VDD+0.3 150 V ℃ Input Voltage Maximum junction temperature ●Recommended Operating Conditions Limit Parameter Symbol Operating Power Supply VDD Input Voltage VIN BU4001B BU4011B Unit BU4030B BU4081B BU4093B BU4069UB BU4584B /BU4070B 3 to 16 V 0 to VDD V ●Thermal Derating Curve Power dissipation Pd [mW] 1400 1180[mV] BU4＊＊＊ (*1) 870[mV] BU4＊＊＊FV (*2) 1200 610[mV] BU4＊＊＊F 1000 (*3) (＊)shows BU4＊＊＊ below BU4001B BU4011B BU4030B BU4070B BU4081B BU4093B BU4069UB BU4584B 800 600 400 (*1) 9.5 200 0 25 50 75 85℃100 125 150 175 Ambient temperature Ta [℃] (*2) 7.0 (*3) 4.9 UNIT mW/℃ When used at Ta=25[°C] or above, values of above are reduced per 1[°C]. Allowable loss is the value for mounting 70[mm] x 70[mm] x 1.6[mm] FR4 glass epoxy circuit board (copper foil area is 3% or less). ●Input / Output Equivalent Circuits VDD VDD VDD VDD GND GND GND GND ＜Input＞ www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. ＜Output＞ 2 / 21 6 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note DC Characteristics ●Electrical Characteristics(BU4001B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF) Standard Value Parameter Symbol Unit MIN TYP MAX VDD[V] 3.5 － － 5 Input “H” voltage VIH 7.0 － － V 10 11.0 － － 15 － － 1.5 5 Input “L” voltage VIL － － 3.0 V 10 － － 4.0 15 Input “H” current IIH － － 0.3 μA 15 Input “L” current IIL － － -0.3 μA 15 4.95 － － 5 Output “H” voltage VOH 9.95 － － V 10 14.95 － － 15 － － 0.05 5 Output “L” voltage VOL － － 0.05 V 10 － － 0.05 15 -0.16 － － 5 Output “H” current IOH -0.4 － － mA 10 -1.2 － － 15 0.44 － － 5 Output “L” current IOL 1.1 － － mA 10 3.0 － － 15 － － 1 5 Static supply current IDD － － 2 μA 10 － － 4 15 Switching Characteristics Parameter Symbol Output rising time tTLH Output falling time tTHL “L” to ”H” Propagation delay time tPLH “H” to ”L” Propagation delay time tPHL Input capacitance CIN www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. MIN － － － － － － － － － － － － － Standard Value TYP MAX 180 － 90 － 65 － 100 － 50 － 40 － 90 － 50 － 40 － 90 － 50 － 40 － 5 － 3 / 21 6 Unit ns ns ns ns pF VDD[V] 5 10 15 5 10 15 5 10 15 5 10 15 － Condition － － VIH=15[V] VIL=0[V] IO=0[mA] IO=0[mA] VOH=4.6[V] VOH=9.5[V] VOH=13.5[V] VOL=0.4[V] VOL=0.5[V] VOL=1.5[V] VI=VDD or GND Fig.No 1 2 3 1 2 3 － － 1 2 3 1 2 3 4 5 － Condition Fig.No － 6 － 7 － 8 － 9 － － 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note DC Characteristics ●Electrical Characteristics(BU4011B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF) Standard Value Parameter Symbol Unit MIN TYP MAX VDD[V] 3.5 － － 5 Input “H” voltage VIH 7.0 － － V 10 11.0 － － 15 － － 1.5 5 Input “L” voltage VIL － － 3.0 V 10 － － 4.0 15 Input “H” current IIH － － 0.3 μA 15 Input “L” current IIL － － -0.3 μA 15 4.95 － － 5 Output “H” voltage VOH 9.95 － － V 10 14.95 － － 15 － － 0.05 5 Output “L” voltage VOL － － 0.05 V 10 － － 0.05 15 -0.16 － － 5 Output “H” current IOH -0.4 － － mA 10 -1.2 － － 15 0.44 － － 5 Output “L” current IOL 1.1 － － mA 10 3.0 － － 15 － － 1 5 Static supply current IDD － － 2 μA 10 － － 4 15 Switching Characteristics Parameter Symbol Output rising time tTLH Output falling time tTHL “L” to ”H” Propagation delay time tPLH “H” to ”L” Propagation delay time tPHL Input capacitance CIN www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. MIN － － － － － － － － － － － － － Standard Value TYP MAX 180 － 90 － 65 － 100 － 50 － 40 － 90 － 50 － 40 － 90 － 50 － 40 － 5 － 4 / 21 6 Unit ns ns ns ns pF VDD[V] 5 10 15 5 10 15 5 10 15 5 10 15 － Condition － － VIH=15[V] VIL=0[V] IO=0[mA] IO=0[mA] VOH=4.6[V] VOH=9.5[V] VOH=13.5[V] VOL=0.4[V] VOL=0.5[V] VOL=1.5[V] VI=VDD or GND Fig.No 10 11 12 10 11 12 － － 10 11 12 10 11 12 13 14 － Condition Fig.No － 15 － 16 － 17 － 18 － － 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note DC Characteristics ●Electrical Characteristics(BU4030B/ BU4070B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF) Standard Value Parameter Symbol Unit Condition MIN TYP MAX VDD[V] 3.5 － － 5 Input “H” voltage VIH 7.0 － － V 10 － 11.0 － － 15 － － 1.5 5 Input “L” voltage VIL － － 3.0 V 10 － － － 4.0 15 Input “H” current IIH － － 0.3 μA 15 VIH=15[V] Input “L” current IIL － － -0.3 μA 15 VIL=0[V] 4.95 － － 5 Output “H” voltage VOH 9.95 － － V 10 IO=0[mA] 14.95 － － 15 － － 0.05 5 Output “L” voltage VOL － － 0.05 V 10 IO=0[mA] － － 0.05 15 -0.16 － － 5 VOH=4.6[V] Output “H” current IOH -0.4 － － mA 10 VOH=9.5[V] -1.2 － － 15 VOH=13.5[V] 0.44 － － 5 VOL=0.4[V] Output “L” current IOL 1.1 － － mA 10 VOL=0.5[V] 3.0 － － 15 VOL=1.5[V] － － 1 5 Static supply current IDD － － 2 μA 10 VI=VDD or GND － － 4 15 Switching Characteristics Parameter Symbol Output rising time tTLH Output falling time tTHL “L” to ”H” Propagation delay time tPLH “H” to ”L” Propagation delay time tPHL Input capacitance CIN www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. MIN － － － － － － － － － － － － － Standard Value TYP MAX 180 － 90 － 65 － 100 － 50 － 40 － 90 － 50 － 40 － 90 － 50 － 40 － 5 － 5 / 21 6 Unit ns ns ns ns pF VDD[V] 5 10 15 5 10 15 5 10 15 5 10 15 － Fig.No 19 20 21 19 20 21 － － 19 20 21 19 20 21 22 23 － Condition Fig.No － 24 － 25 － 26 － 27 － － 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note DC Characteristics ●Electrical Characteristics(BU4081B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF) Standard Value Parameter Symbol Unit Condition MIN TYP MAX VDD[V] 3.5 － － 5 Input “H” voltage VIH 7.0 － － V 10 － 11.0 － － 15 － － 1.5 5 Input “L” voltage VIL － － 3.0 V 10 － － － 4.0 15 Input “H” current IIH － － 0.3 μA 15 VIH=15[V] Input “L” current IIL － － -0.3 μA 15 VIL=0[V] 4.95 － － 5 Output “H” voltage VOH 9.95 － － V 10 IO=0[mA] 14.95 － － 15 － － 0.05 5 Output “L” voltage VOL － － 0.05 V 10 IO=0[mA] － － 0.05 15 -0.16 － － 5 VOH=4.6[V] Output “H” current IOH -0.4 － － mA 10 VOH=9.5[V] -1.2 － － 15 VOH=13.5[V] 0.44 － － 5 VOL=0.4[V] Output “L” current IOL 1.1 － － mA 10 VOL=0.5[V] 3.0 － － 15 VOL=1.5[V] － － 1 5 Static supply current IDD － － 2 μA 10 VI=VDD or GND － － 4 15 Switching Characteristics Parameter Symbol Output rising time tTLH Output falling time tTHL “L” to ”H” Propagation delay time tPLH “H” to ”L” Propagation delay time tPHL Input capacitance CIN www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. MIN － － － － － － － － － － － － － Standard Value TYP MAX 180 － 90 － 65 － 100 － 50 － 40 － 160 － 65 － 50 － 160 － 65 － 50 － 5 － 6 / 21 6 Unit ns ns ns ns pF VDD[V] 5 10 15 5 10 15 5 10 15 5 10 15 － Fig.No 28 29 30 28 29 30 － － 28 29 30 28 29 30 31 32 － Condition Fig.No － 33 － 34 － 35 － 36 － － 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note DC Characteristics ●Electrical Characteristics(BU4093B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF) Standard Value Parameter Symbol Unit MIN TYP MAX VDD[V] 3.5 － － 5 Input “H” voltage VIH 7.0 － － V 10 11.0 － － 15 － － 1.5 5 Input “L” voltage VIL － － 3.0 V 10 － － 4.0 15 Input “H” current IIH － － 0.3 μA 15 Input “L” current IIL － － -0.3 μA 15 4.95 － － 5 Output “H” voltage VOH 9.95 － － V 10 14.95 － － 15 － － 0.05 5 Output “L” voltage VOL － － 0.05 V 10 － － 0.05 15 -0.44 － － 5 Output “H” current IOH -1.1 － － mA 10 -3.0 － － 15 0.44 － － 5 Output “L” current IOL 1.1 － － mA 10 3.0 － － 15 － － 1 5 Static supply current IDD － － 2 μA 10 － － 4 15 0.17 － 0.39 5 Hysteresis voltage VH 0.25 － 0.60 μA 10 0.33 － 0.90 15 Switching Characteristics Parameter Symbol Output rising time tTLH Output falling time tTHL “L” to ”H” Propagation delay time tPLH “H” to ”L” Propagation delay time tPHL Input capacitance CIN www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. Standard Value MIN TYP MAX － 100 － － 50 － － 40 － － 100 － － 50 － － 40 － － 125 － － 50 － － 40 － － 125 － － 50 － － 40 － － 5 － 7 / 21 6 Unit ns ns ns ns pF VDD[V] 5 10 15 5 10 15 5 10 15 5 10 15 － Condition － － VIH=15[V] VIL=0[V] IO=0[mA] IO=0[mA] VOH=4.6[V] VOH=9.5[V] VOH=13.5[V] VOL=0.4[V] VOL=0.5[V] VOL=1.5[V] VI=VDD or GND Fig.No 37 38 39 37 38 39 － － 37 38 39 37 38 39 40 41 － － － Condition Fig.No － 42 － 43 － 44 － 45 － － 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note DC Characteristics ●Electrical Characteristics(BU4069UB)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF) Standard Value Parameter Symbol Unit Condition MIN TYP MAX VDD[V] 4.0 － 5 Input “H” voltage VIH 8.0 － V 10 － 12.5 － 15 － － 1.0 5 Input “L” voltage VIL － － 2.0 V 10 － － － 2.5 15 Input “H” current IIH － － 0.3 μA 15 VIH=15[V] Input “L” current IIL － － -0.3 μA 15 VIL=0[V] 4.95 － － 5 Output “H” voltage VOH 9.95 － － V 10 IO=0[mA] 14.95 － － 15 － － 0.05 5 Output “L” voltage VOL － － 0.05 V 10 IO=0[mA] － － 0.05 15 -0.44 － 5 VOH=4.6[V] Output “H” current IOH -1.1 － mA 10 VOH=9.5[V] -3.0 － 15 VOH=13.5[V] 0.44 － 5 VOL=0.4[V] Output “L” current IOL 1.1 － mA 10 VOL=0.5[V] 3.0 － 15 VOL=1.5[V] － － 1 5 Static supply current IDD － － 2 μA 10 VI=VDD or GND － － 4 15 Switching Characteristics Parameter Symbol Output rising time tTLH Output falling time tTHL “L” to ”H” Propagation delay time tPLH “H” to ”L” Propagation delay time tPHL Input capacitance CIN www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. MIN － － － － － － － － － － － － － Standard Value TYP MAX 180 － 90 － 65 － 100 － 50 － 40 － 90 － 50 － 40 － 65 － 40 － 30 － 5 － 8 / 21 6 Unit ns ns ns ns pF VDD[V] 5 10 15 5 10 15 5 10 15 5 10 15 － Fig.No 46 47 48 46 47 48 － － 46 47 48 46 47 48 49 50 － Condition Fig.No － 51 － 52 － 53 － 54 － － 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note DC Characteristics ●Electrical Characteristics(BU4584B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF) Standard Value Parameter Symbol Unit MIN TYP MAX VDD[V] 3.5 － － 5 Input “H” voltage VIH 7.0 － － V 10 11.0 － － 15 － － 1.5 5 Input “L” voltage VIL － － 3.0 V 10 － － 4.0 15 Input “H” current IIH － － 0.3 μA 15 Input “L” current IIL － － -0.3 μA 15 4.95 － － 5 Output “H” voltage VOH 9.95 － － V 10 14.95 － － 15 － － 0.05 5 Output “L” voltage VOL － － 0.05 V 10 － － 0.05 15 -0.44 － － 5 Output “H” current IOH -1.1 － － mA 10 -3.0 － － 15 0.44 － － 5 Output “L” current IOL 1.1 － － mA 10 3.0 － － 15 － － 1 5 Static supply current IDD － － 2 μA 10 － － 4 15 0.15 － 0.6 5 Hysteresis voltage VH 0.25 － 1.0 μA 10 0.40 － 1.5 15 Input capacitance CIN － 5 － pF － Switching Characteristics Parameter Symbol Output rising time tTLH Output falling time tTHL “L” to ”H” Propagation delay time tPLH “H” to ”L” Propagation delay time tPHL www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. MIN － － － － － － － － － － － － Standard Value TYP MAX 100 － 50 － 40 － 100 － 50 － 40 － 125 － 60 － 50 － 125 － 60 － 50 － 9 / 21 6 Unit ns ns ns ns VDD[V] 5 10 15 5 10 15 5 10 15 5 10 15 Condition － － VIH=15[V] VIL=0[V] IO=0[mA] IO=0[mA] VOH=4.6[V] VOH=9.5[V] VOH=13.5[V] VOL=0.4[V] VOL=0.5[V] VOL=1.5[V] Fig.No 55 56 57 55 56 57 － － 55 56 57 55 56 57 58 59 － － － － － － Condition Fig.No － 60 － 61 － 62 － 63 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Switching Characteristics 20[ns ] 20[ns ] 90% 50% Inpu t 10% ①tPHL ②tPLH 90% Output Description of Symbols (1) tPHL: Time up to 50% of rise time of input waveform ~ 50% of fall time of output waveform (2) tPLH: Time up to 50% of fall time of input waveform ~ 50% of rise time of output waveform (3) tTHL: Time up to 90% ~ 10% of fall time of output waveform (4) tTLH: Time up to 10% ~ 90% of rise time of output waveform 50% 10% ④tTLH ③tTHL 20[ns ] 20[ns ] 90% 50% Inpu t 10% ②tpHL ①tpLH 90% Description of Symbols (1) tPLH: Time up to 50% of rise time of input waveform ~50% of rise time of output waveform (2) tPHL: Time up to 50% of fall time of input waveform ~ 50% of fall time of output waveform (3) tTLH: Time up to 10% ~ 90% of rise time of output waveform (4) tTHL: Time up to 90% ~ 10% of fall time of output waveform 50% Outpu t 10% ③tTLH ④tTHL www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 10 / 21 6 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Electrical Characteristics Curves(BU4001B) 6 20 12 [BU4001B/F] [BU4001B/F] 10 25[℃] -40[℃] 4 3 2 85[℃] 25[℃] -40[℃] 85[℃] 15 Output Voltage [V] 85[℃] Output Voltage [V] Output Voltage [V] 5 [BU4001B/F] 8 6 4 25[℃] -40[℃] 10 5 1 2 0 0 0 1 2 3 4 0 5 0 2 4 Input Voltage [V] 8 0 5 10 15 Input Voltage [V] Fig.1 Fig.2 Fig.3 Output voltage－Input voltage characteristics （VDD=5[V] / VSS=0[V]） Output voltage－Input voltage characteristics （VDD=10[V] / VSS=0[V]） Output voltage－Input voltage characteristics （VDD=15[V] / VSS=0[V]） 85[℃] 20 VDD=5[V] -40[℃] 25[℃] 10 40 30 20 -40[℃] 25[℃] VDD=10[V] 85[℃] 10 0 0 5 10 15 0 20 5 10 15 Fig.4 Output source current－voltage characteristics 450 Propagation Delay Time [ns] 350 VDD=3[V] 250 200 VDD=5[V] VDD=10[V] 20 25 50 -25 0 25 75 100 Ambient Temperature [℃] Fig.7 Falling time tTHL www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 50 75 400 [BU4001B/F] [BU4001B/F] 350 Operating Temperature Range 300 250 100 Ambient Temperature [℃] VDD=3[V] 200 150 VDD=5[V] 100 VDD=10[V] Operating Temperature Range 300 VDD=3[V] 250 200 150 VDD=5[V] 100 VDD=10[V] 50 VDD=18[V] 0 0 VDD=18[V] -50 VDD=18[V] 0 -25 VDD=10[V] Fig.6 VDD=18[V] -50 VDD=5[V] 100 0 50 50 VDD=3[V] 150 Rising time tTLH 350 Operating Temperature Range 100 200 Fig.5 400 150 250 Output sink current－voltage characteristics [BU4001B/F] 300 300 Output Voltage [V] Output Voltage [V] 400 Operating Temperature Range 50 -40[℃] 25[℃] VDD=5[V] 85[℃] Propagation Delay Time [ns] 30 VDD=15[V] -40[℃] 25[℃] 85[℃] Output Rise Time [ns] VDD=10[V] -40[℃] 25[℃] 0 [BU4001B/F] [BU4001B/F] 350 Output Sink Current [mA] 40 400 50 [BU4001B/F] VDD=15[V] -40[℃] 25[℃] 85[℃] 85[℃] Output Fall Time [ns] 10 Input Voltage [V] 50 Output Source Current [mA] 6 0 -50 -25 0 25 50 75 Ambient Temperature [℃] 100 -50 -25 0 25 50 75 Fig.8 Fig.9 Rising propagation delay tPLH Falling propagation delay tPHL 11 / 21 6 100 Ambient Temperature [℃] 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Electrical Characteristics Curves(BU4011B) 6 20 [BU4011B/F/FV] [BU4011B/F/FV] 10 5 4 25[℃] 15 -40[℃] 3 2 85[℃] 25[℃] Output Voltage [V] 85[℃] Output Voltage [V] Output Voltage [V] [BU4011B/F/FV] -40[℃] 5 85[℃] 25[℃] -40[℃] 10 5 1 0 0 0 1 2 3 4 0 0 5 2 4 10 0 5 10 15 Input Voltage [V] Fig.10 Fig.11 Fig.12 Output voltage－Input voltage characteristics （VDD=5[V] / VSS=0[V]） Output voltage－Input voltage characteristics （VDD=10[V] / VSS=0[V]） Output voltage－Input voltage characteristics （VDD=15[V] / VSS=0[V]） VDD=10[V] -40[℃] 25[℃] 30 85[℃] 20 VDD=5[V] -40[℃] 25[℃] 10 VDD=15[V] -40[℃] 25[℃] 85[℃] 40 20 -40[℃] 25[℃] VDD=10[V] 85[℃] 10 5 10 15 20 0 5 Output Voltage [V] 10 Fig.13 VDD=3[V] 200 VDD=5[V] 100 VDD=10[V] VDD=18[V] 0 -50 -25 0 25 50 75 100 Ambient Temperature [℃] Propagation Delay Time [ns] Operating Temperature Range 300 200 VDD=3[V] VDD=5[V] VDD=10[V] VDD=18[V] 0 20 -50 25 50 Fig.14 Fig.15 Rising time tTLH 500 [BU4011B/F/FV] Operating Temperature Range 400 300 VDD=3[V] 200 VDD=5[V] 100 VDD=18[V] 0 -50 -25 0 25 50 75 Ambient Temperature [℃] Fig.17 Rising propagation delay tPLH 12 / 21 6 75 100 [BU4011B/F/FV] Operating Temperature Range 400 VDD=3[V] 300 200 VDD=5[V] 100 VDD=10[V] VDD=10[V] Fig.16 www.rohm.com 0 Ambient Temperature [℃] Falling time tTHL © 2009 ROHM Co., Ltd. All rights reserved. -25 Output sink current－voltage characteristics 500 [BU4011B/F/FV] 400 15 300 Output Voltage [V] Output source current－voltage characteristics 500 Operating Temperature Range 100 -40[℃] 25[℃] VDD=5[V] 85[℃] 0 0 [BU4011B/F/FV] 400 30 85[℃] 0 500 [BU4011B/F/FV] Output Rise Time [ns] 40 50 [BU4011B/F/FV] Propagation Delay Time [ns] VDD=15[V] -40[℃] 25[℃] 85[℃] Output Sink Current [mA] 50 Output Source Current [mA] 8 Input Voltage [V] Input Voltage [V] Output Fall Time [ns] 6 VDD=18[V] 0 100 -50 -25 0 25 50 75 100 Ambient Temperature [℃] Fig.18 Falling propagation delay tPHL 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Electrical Characteristics Curves(BU4030B / BU4070B) [BU4070B/F] 85[℃] 4 25[℃] 20 [BU4030B/F] [BU4030B/F] [BU4070B/F] 10 [BU4070B/F] 15 -40[℃] Output Voltage [V] 5 Output Voltage [V] 12 [BU4030B/F] 3 2 8 85[℃] 25[℃] Output Voltage [V] 6 -40[℃] 6 4 85[℃] 25[℃] -40[℃] 10 5 1 2 0 0 0 1 2 3 4 0 5 0 5 5 10 15 Input Voltage [V] Fig.19 Fig.20 Fig.21 Output voltage－Input voltage characteristics （VDD=5[V] / VSS=0[V]） Output voltage－Input voltage characteristics （VDD=10[V] / VSS=0[V]） Output voltage－Input voltage characteristics （VDD=15[V] / VSS=0[V]） 50 50 400 VDD=10[V] -40[℃] 25[℃] 30 85[℃] 20 VDD=5[V] -40[℃] 25[℃] 10 0 VDD=15[V] -40[℃] 25[℃] 85[℃] 40 20 -40[℃] 25[℃] VDD=10[V] 85[℃] 10 5 10 15 20 [BU4070B/F] Operating Temperature Range 30 0 5 Output Voltage [V] 10 300 200 VDD=3[V] VDD=5[V] 100 VDD=10[V] -40[℃] 25[℃] VDD=5[V] 85[℃] 0 0 [BU4030B/F] [BU4070B/F] [BU4070B/F] Output Rise Time [ns] 40 [BU4030B/F] [BU4030B/F] VDD=15[V] -40[℃] 25[℃] 85[℃] 85[℃] VDD=18[V] 0 15 -50 20 -25 0 25 50 Fig.22 Fig.23 Fig.24 Output sink current－voltage characteristics Rising time tTLH VDD=3[V] 300 200 VDD=5[V] 100 VDD=10[V] VDD=18[V] 0 -50 -25 0 25 50 75 500 [BU4070B/F] Operating Temperature Range 300 VDD=3[V] 200 VDD=5[V] 100 VDD=10[V] VDD=18[V] 0 100 Ambient Temperature [℃] Fig.25 Falling time tTHL www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. -50 -25 0 25 50 Fig.26 Rising propagation delay tPLH 6 400 VDD=3[V] 300 200 VDD=5[V] 100 VDD=10[V] VDD=18[V] 0 75 Ambient Temperature [℃] 13 / 21 100 [BU4030B/F] [BU4070B/F] Operating Temperature Range [BU4030B/F] Propagation Delay Time [ns] 400 400 Propagation Delay Time [ns] [BU4030B/F] [BU4070B/F] Operating Temperature Range 75 Ambient Temperature [℃] Output Voltage [V] Output source current－voltage characteristics 500 Output Fall Time [ns] 0 Input Voltage [V] Output Sink Current [mA] Output Source Current [mA] Input Voltage [V] 10 100 -50 -25 0 25 50 75 100 Ambient Temperature [℃] Fig.27 Falling propagation delay tPHL 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Electrical Characteristics Curves(BU4081B) 6 12 [BU4081B/F/FV] 85[℃] 5 20 [BU4081B/F/FV] 85[℃] 25[℃] -40[℃] 25[℃] [BU4081B/F/FV] -40[℃] 85[℃] 10 25[℃] -40[℃] 3 2 Output Voltage [V] Output Voltage [V] Output Voltage [V] 15 4 8 6 4 10 5 1 2 0 0 0 0 1 2 3 4 5 0 2 4 Input Voltage [V] 8 0 10 5 10 Fig.28 Fig.29 Fig.30 Output voltage－Input voltage characteristics （VDD=10[V] / VSS=0[V]） Output voltage－Input voltage characteristics （VDD=15[V] / VSS=0[V]） 30 VDD=10[V] -40[℃] 25[℃] 20 VDD=5[V] -40[℃] 25[℃] 10 0 40 10 15 Operating Temperature Range -40[℃] 25[℃] 85[℃] 30 20 -40[℃] 25[℃] VDD=10[V] 85[℃] 10 -40[℃] 25[℃] VDD=5[V] 85[℃] 0 5 [BU4081B/F/FV] VDD=15[V] 85[℃] 0 200 [BU4081B/F/FV] Output Rise Time [ns] 40 50 [BU4081B/F/FV] Output Sink Current [mA] VDD=15[V] -40[℃] 25[℃] 85[℃] 85[℃] 20 0 5 Output Voltage [V] 10 15 150 100 VDD=3[V] 50 VDD=5[V] VDD=10[V] VDD=18[V] 0 -50 20 -25 0 25 50 Fig.31 Fig.32 Fig.33 Output sink current－voltage characteristics Rising time tTLH 200 [BU4081B/F/FV] Propagation Delay Time [ns] Operating Temperature Range VDD=3[V] 100 VDD=5[V] VDD=10[V] -50 -25 0 25 50 75 100 VDD=5[V] 50 VDD=10[V] Operating Temperature Range 200 VDD=3[V] 150 100 VDD=5[V] 50 VDD=10[V] VDD=18[V] VDD=18[V] 0 VDD=3[V] 150 VDD=18[V] 0 100 Ambient Temperature [℃] Fig.34 Falling time tTHL www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 100 [BU4081B/F/FV] Operating Temperature Range 150 50 250 [BU4081B/F/FV] Propagation Delay Time [ns] 200 75 Ambient Temperature [℃] Output Voltage [V] Output source current－voltage characteristics Output Fall Time [ns] 15 Input Voltage [V] Input Voltage [V] Output voltage－Input voltage characteristics （VDD=5[V] / VSS=0[V]） 50 Output Source Current [mA] 6 0 -50 -25 0 25 50 75 Ambient Temperature [℃] Fig.35 Rising propagation delay tPLH 14 / 21 6 100 -50 -25 0 25 50 75 100 Ambient Temperature [℃] Fig.36 Falling propagation delay tPHL 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Electrical Characteristics Curves(BU4093B) 6 12 [BU4093B/F/FV] [BU4093B/F/FV] 10 25[℃] 85[℃] 85[℃] -40[℃] 4 3 2 25[℃] 25[℃] -40[℃] 15 -40[℃] Output Voltage [V] 85[℃] Output Voltage [V] Output Voltage [V] 5 20 [BU4093B/F/FV] 8 6 4 10 5 1 2 0 0 0 0 1 2 3 4 5 0 5 Input Voltage [V] 0 10 15 Fig.37 Fig.38 Fig.39 Output voltage－Input voltage characteristics （VDD=10[V] / VSS=0[V]） Output voltage－Input voltage characteristics 50 50 400 [BU4093B/F/FV] （VDD=15[V] / VSS=0[V]） [BU4093B/F/FV] [BU4093B/F/FV] 40 30 350 VDD=10[V] -40[℃] 25[℃] 85[℃] 20 VDD=5[V] -40[℃] 25[℃] 85[℃] 10 40 VDD=15[V] -40[℃] 25[℃] 85[℃] 30 20 VDD=10[V] -40[℃] 25[℃] 85[℃] 10 -40[℃] 25[℃] VDD=5[V] 85[℃] 0 0 0 5 10 15 Output Rise Time[ns] -40[℃] 25[℃] 85[℃] Output Source Current [mA] 0 20 5 10 Operating Temperature Range 300 250 200 VDD=3[V] 150 VDD=5[V] VDD=10[V] 100 VDD=18[V] 50 0 15 20 -50 -25 Output Voltage [V] Output Voltage [V] 0 25 50 Fig.40 Fig.41 Fig.42 Output source current－voltage characteristics Output sink current－voltage characteristics Rising time tTLH 400 400 400 Propagation Delay Time [ns] 300 VDD=3[V] 200 VDD=5[V] 100 VDD=10[V] Operating Temperature Range 300 200 VDD=3[V] 100 VDD=5[V] 0 -25 0 25 50 75 200 VDD=3[V] 100 VDD=5[V] VDD=10[V] VDD=18[V] 0 -50 Operating Temperature Range 300 VDD=10[V] VDD=18[V] 100 Ambient Temperature [℃] -50 -25 0 25 50 75 Ambient Temperature [℃] VDD=18[V] 0 100 -50 -25 0 25 50 75 Fig.43 Fig.44 Fig.45 Rising propagation delay tPLH Falling propagation delay tPHL www.rohm.com 15 / 21 6 100 Ambient Temperature [℃] Falling time tTHL © 2009 ROHM Co., Ltd. All rights reserved. 100 [BU4093B/F/FV] [BU4093B/F/FV] [BU4093B/F/FV] Operating Temperature Range 75 Output Voltage [V] Propagation Delay Time [ns] Output Source Current [mA] 10 Output voltage－Input voltage characteristics （VDD=5[V] / VSS=0[V]） VDD=15[V] Output Fall Time [ns] 5 Input Voltage [V] Input Voltage [V] 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Electrical Characteristics Curves(BU4069UB) 5 85[℃] 25[℃] 4 3 2 1 85[℃] -40[℃] 8 6 4 85[℃] 15 25[℃] -40[℃] 10 5 0 0 0 1 2 3 4 5 0 2 4 Input Voltage [V] 6 8 0 10 5 10 15 Input Voltage [V] Input Voltage [V] Fig.46 Fig.47 Fig.48 Output voltage－Input voltage characteristics Output voltage－Input voltage characteristics Output voltage－Input voltage characteristics （VDD=5[V] / VSS=0[V]） （VDD=10[V] / VSS=0[V]） （VDD=15[V] / VSS=0[V]） 50 40 30 VDD=10[V] -40[℃] 25[℃] 85[℃] VDD=15[V] -40[℃] 25[℃] 20 85[℃] 10 40 VDD=15[V] -40[℃] 30 25[℃] 85[℃] 20 5 10 15 0 20 -40[℃] 25[℃] 85[℃] 5 15 VDD=10[V] VDD=18[V] 100 20 -50 VDD=3[V] 300 VDD=5[V] VDD=10[V] 0 25 50 Fig.50 Fig.51 Output sink current－voltage characteristics Rising time tTLH 75 100 400 [BU4069UB/F/FV] [BU4069UB/F/FV] VDD=18[V] Propagation Delay Time [ns] 400 -25 Ambient Temperature [℃] 400 [BU4069UB/F/FV] Operating Temperature Range 100 VDD=3[V] VDD=5[V] 200 0 10 Fig.49 Output source current－voltage characteristics 200 300 Output Voltage [V] Output Voltage [V] 500 VDD=10[V] -40[℃] 25[℃] 85[℃] 10 VDD=5[V] 0 [BU4069UB/F/FV] Operating Temperature Range 0 0 400 [BU4069UB/F/FV] Output Rise Time [ns] VDD=5[V] -40[℃] 25[℃] 85[℃] Output Sink Current [mA] [BU4069UB/F/FV] Operating Temperature Range Propagation Delay Time [ns] 50 Output Source Current [mA] 25[℃] [BU4069UB/F/FV] 2 0 Output Fall Time [ns] 20 [BU4069UB/F/FV] 10 -40[℃] Output Voltage [V] Output Voltage [V] 12 [BU4069UB/F/FV] Output Voltage [V] 6 300 VDD=10[V] 200 VDD=18[V] VDD=3[V] 100 VDD=5[V] Operating Temperature Range 300 VDD=3[V] 200 VDD=10[V] VDD=18[V] VDD=5[V] 100 VDD=18[V] 0 0 0 -50 -25 0 25 50 75 100 Ambient Temperature [℃] Fig.52 Falling time tTHL www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. -50 -25 0 25 50 75 Ambient Temperature [℃] 100 -50 -25 0 25 50 75 100 Ambient Temperature [℃] Fig.53 Fig.54 Rising propagation delay tPLH Falling propagation delay tPHL 16 / 21 6 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Electrical Characteristics Curves(BU4584B) Output Voltage [V] -40[℃] 3 2 85[℃] 25[℃] 8 15 -40[℃] 6 4 85[℃] 25[℃] 10 -40[℃] 5 2 0 0 1 2 3 4 0 0 5 0 2 4 Input Voltage [V] 6 8 0 10 5 10 Fig.57 Fig.55 Fig.56 Output voltage－Input voltage characteristics Output voltage－Input voltage characteristics Output voltage－Input voltage characteristics （VDD=5[V] / VSS=0[V]） （VDD=10[V] / VSS=0[V] ） （VDD=15[V] / VSS=0[V]） 50 50 VDD=5[V] -40[℃] 25[℃] 85[℃] 40 30 VDD=10[V] -40[℃] 25[℃] 85[℃] 20 VDD=15[V] -40[℃] 25[℃] 85[℃] 10 40 VDD=15[V] -40[℃] 30 25[℃] 85[℃] 20 10 15 VDD=10[V] -40[℃] 25[℃] 85[℃] 10 -40[℃] 25[℃] 85[℃] VDD=5[V] 5 [BU4584B/F/FV] Operating Temperature Range 0 0 400 [BU4584B/F/FV] Output Sink Current [mA] [BU4584B/F/FV] 0 0 20 5 Output Voltage [V] 300 200 VDD=3[V] 100 VDD=10[V] VDD=5[V] VDD=18[V] 0 10 15 20 -50 Output Voltage [V] -25 0 25 50 Fig.58 Fig.59 Fig.60 Output sink current－voltage characteristics Rising time tTLH 400 [BU4584B/F/FV] Operating Temperature Range Propagation Delay Time [ns] 400 VDD=3[V] 300 200 VDD=5[V] 100 VDD=10[V] 400 [BU4584B/F/FV] 300 200 VDD=3[V] 100 100 [BU4584B/F/FV] Operating Temperature Range Operating Temperature Range Propagation Delay Time [ns] 500 75 Ambient Temperature [℃] Output source current－voltage characteristics Output Fall Time [ns] 15 Input Voltage [V] Input Voltage [V] Output Rise Time [ns] Output Voltage [V] 10 85[℃] 25[℃] 1 Output Source Current [mA] [BU4584B/F/FV] [BU4584B/F/FV] 5 4 20 12 [BU4584B/F/FV] Output Voltage [V] 6 VDD=5[V] 300 VDD=3[V] 200 VDD=5[V] 100 VDD=10[V] VDD=10[V] VDD=18[V] 0 -50 -25 0 25 50 75 100 Ambient Temperature [℃] VDD=18[V] VDD=18[V] 0 -50 -25 0 25 50 75 Ambient Temperature [℃] 0 100 -50 -25 0 25 50 75 Fig.61 Fig.62 Fig.63 Falling time tTHL Rising propagation delay tPLH Falling propagation delay tPHL www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 17 / 21 6 100 Ambient Temperature [℃] 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Pinout Diagrams・Pin Description 1) BU4001B Series 2) BU4011B Series 3) BU4030B Series A1 1 14 VDD A1 1 14 VDD A1 1 14 VDD B1 2 13 A4 B1 2 13 A4 B1 2 13 A4 O1 3 12 B4 O1 3 12 B4 O1 3 12 B4 O2 4 11 O4 O2 4 11 O4 O2 4 11 O4 B2 5 10 O3 B2 5 10 O3 B2 5 10 O3 A2 6 9 B3 A2 6 9 B3 A2 6 9 B3 VSS 7 8 A3 VSS 7 8 A3 VSS 7 8 A3 PIN No. PIN NAME I/O PIN FUNCTION PIN No. PIN NAME I/O PIN FUNCTION PIN No. PIN NAME I/O PIN FUNCTION 1 A1 I INPUT1 1 A1 I INPUT1 1 A1 I INPUT1 2 B1 I INPUT1 2 B1 I INPUT1 2 B1 I INPUT1 3 O1 O OUTPUT1 3 O1 O OUTPUT1 3 O1 O OUTPUT1 4 O2 O OUTPUT2 4 O2 O OUTPUT2 4 O2 O OUTPUT2 5 B2 I INPUT2 5 B2 I INPUT2 5 B2 I INPUT2 6 A2 I INPUT2 6 A2 I INPUT2 6 A2 I INPUT2 7 VSS ― Power Supply(-) 7 VSS ― Power Supply(-) 7 VSS ― Power Supply(-) 8 A3 I INPUT3 8 A3 I INPUT3 8 A3 I INPUT3 9 B3 I INPUT3 9 B3 I INPUT3 9 B3 I INPUT3 10 O3 O OUTPUT3 10 O3 O OUTPUT3 10 O3 O OUTPUT3 11 O4 O OUTPUT4 11 O4 O OUTPUT4 11 O4 O OUTPUT4 12 B4 I INPUT4 12 B4 I INPUT4 12 B4 I INPUT4 13 A4 I INPUT4 13 A4 I INPUT4 13 A4 I INPUT4 14 VDD ― Power Supply(+) 14 VDD ― Power Supply(+) 14 VDD ― Power Supply(+) TRUTH TABLE TRUTH TABLE TRUTH TABLE A B OUT A B OUT A B L L H L L H L L OUT L L H L L H H L H H H L L H L H H L H H H L H H L H H L 4) BU4070B Series 5) BU4081B Series 6) BU4093B Series A1 1 14 VDD A1 1 14 VDD I1 1 14 VDD B1 2 13 A4 B1 2 13 A4 I2 2 13 I8 O1 3 12 B4 O1 3 12 B4 O1 3 12 I7 O2 4 11 O4 O2 4 11 O4 O2 4 11 O4 B2 5 10 O3 B2 5 10 O3 I3 5 10 O3 9 B3 I4 6 9 I6 8 A3 VSS 7 8 I5 A2 6 9 B3 A2 6 VSS 7 8 A3 VSS 7 PIN No. PIN NAME I/O PIN FUNCTION PIN No. PIN NAME I/O PIN FUNCTION PIN No. PIN NAME I/O PIN FUNCTION 1 A1 I INPUT1 1 A1 I INPUT1 1 I1 I INPUT1 2 B1 I INPUT1 2 B1 I INPUT1 2 I2 I INPUT2 3 O1 O OUTPUT1 3 O1 O OUTPUT1 3 O1 O OUTPUT1 4 O2 O OUTPUT2 4 O2 O OUTPUT2 4 O2 O OUTPUT2 5 B2 I INPUT2 5 B2 I INPUT2 5 I3 I INPUT3 6 A2 I INPUT2 6 A2 I INPUT2 6 I4 I INPUT4 7 VSS ― Power Supply(-) 7 VSS ― Power Supply(-) 7 VSS ― Power Supply(-) 8 A3 I INPUT3 8 A3 I INPUT3 8 I5 I INPUT5 9 B3 I INPUT3 9 B3 I INPUT3 9 I6 I INPUT6 10 O3 O OUTPUT3 10 O3 O OUTPUT3 10 O3 O OUTPUT3 11 O4 O OUTPUT4 11 O4 O OUTPUT4 11 O4 O OUTPUT4 12 B4 I INPUT4 12 B4 I INPUT4 12 I7 I INPUT7 13 A4 I INPUT4 13 A4 I INPUT4 13 I8 I INPUT8 14 VDD ― Power Supply(+) 14 VDD ― Power Supply(+) 14 VDD ― Power Supply(+) TRUTH TABLE TRUTH TABLE TRUTH TABLE A B OUT A B OUT A B L L L L L L L L H L H H L H L L H H H L H H L L H L H H H L H H H H H L www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 18 / 21 6 OUT 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV 7) BU4069UB Series Technical Note 8) BU4584B Series I1 1 14 VDD I1 1 14 VDD O1 2 13 I6 O1 2 13 I6 O6 I2 3 12 O6 I2 3 12 O2 4 11 I5 O2 4 11 I5 I3 5 10 O5 I3 5 10 O5 O3 6 9 I4 O3 6 9 I4 VEE 7 8 O4 VEE 7 8 O4 PIN No. PIN NAME I/O PIN FUNCYION PIN No. PIN NAME I/O 1 I1 I INPUT1 1 I1 I PIN FUNCYION INPUT1 2 O1 O OUTPUT1 2 O1 O OUTPUT1 3 I2 I INPUT2 3 I2 I INPUT2 4 O2 O OUTPUT2 4 O2 O OUTPUT2 5 I3 I INPUT3 5 I3 I INPUT3 6 O3 O OUTPUT3 6 O3 O OUTPUT3 7 VSS ― Power Supply(-) 7 VSS ― Power Supply(-) 8 I4 O OUTPUT4 8 I4 O OUTPUT4 9 O4 I INPUT4 9 O4 I INPUT4 10 I5 O OUTPUT5 10 I5 O OUTPUT5 11 O5 I INPUT5 11 O5 I INPUT5 12 I6 O OUTPUT6 12 I6 O OUTPUT6 13 O6 I INPUT6 13 O6 I INPUT6 14 VDD ― Power Supply(+) 14 VDD ― Power Supply(+) TRUTH TABLE IN H L TRUTH TABLE OUT L H IN H L OUT L H ●Notes for use 1. Absolute maximum ratings An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can break down the devices, thus making impossible to identify breaking mode, such as a short circuit or an open circuit. If any over rated values will expect to exceed the absolute maximum ratings, consider adding circuit protection devices, such as fuses. 2. Connecting the power supply connector backward Connecting of the power supply in reverse polarity can damage IC. Take precautions when connecting the power supply lines. An external direction diode can be added. 3. Power supply lines Design PCB layout pattern to provide low impedance GND and supply lines. To obtain a low noise ground and supply line, separate the ground section and supply lines of the digital and analog blocks. Furthermore, for all power supply terminals to ICs, connect a capacitor between the power supply and the GND terminal. When applying electrolytic capacitors in the circuit, not that capacitance characteristic values are reduced at low temperatures. 4. GND voltage The potential of GND pin must be minimum potential in all operating conditions. 5. Thermal design Use a thermal design that allows for a sufficient margin in light of the power dissipation (Pd) in actual operating conditions. 6. Inter-pin shorts and mounting errors Use caution when positioning the IC for mounting on printed circuit boards. The IC may be damaged if there is any connection error or if pins are shorted together. 7. Actions in strong electromagnetic field Use caution when using the IC in the presence of a strong electromagnetic field as doing so may cause the IC to malfunction. 8. Testing on application boards When testing the IC on an application board, connecting a capacitor to a pin with low impedance subjects the IC to stress. Always discharge capacitors after each process or step. Always turn the IC's power supply off before connecting it to or removing it from a jig or fixture during the inspection process. Ground the IC during assembly steps as an antistatic measure. Use similar precaution when transporting or storing the IC. 9. Ground Wiring Pattern When using both small signal and large current GND patterns, it is recommended to isolate the two ground patterns, placing a single ground point at the ground potential of application so that the pattern wiring resistance and voltage variations caused by large currents do not cause variations in the small signal ground voltage. Be careful not to change the GND wiring pattern of any external components, either. 10. Unused input terminals Connect all unused input terminals to VDD or VSS in order to prevent excessive current or oscillation. Insertion of a resistor (100kΩ approx.) is also recommended www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 19 / 21 6 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note ●Ordering part number B U 4 Part No. 0 0 Part No. 4001B 4011B 4030B 4070B 1 B F V - Package None: DIP14 F : SOP14 FV : SSOP-B14 4081B 4093B 4069UB 4584B E 2 Packaging and forming specification E2: Embossed tape and reel None:Tray,Tube SOP14 <Tape and Reel information> 8.7 ± 0.2 (MAX 9.05 include BURR) 8 Tape Embossed carrier tape Quantity 2500pcs Direction of feed 0.3MIN 4.4±0.2 6.2±0.3 14 1 E2 The direction is the 1pin of product is at the upper left when you hold ( reel on the left hand and you pull out the tape on the right hand ) 7 1.5±0.1 0.15 ± 0.1 0.4 ± 0.1 0.11 1.27 0.1 1pin Direction of feed ∗ Order quantity needs to be multiple of the minimum quantity. Reel (Unit : mm) SSOP-B14 <Tape and Reel information> 5.0 ± 0.2 8 0.3Min. 4.4 ± 0.2 6.4 ± 0.3 14 1 Tape Embossed carrier tape Quantity 2500pcs Direction of feed E2 The direction is the 1pin of product is at the upper left when you hold ( reel on the left hand and you pull out the tape on the right hand ) 7 0.10 1.15 ± 0.1 0.15 ± 0.1 0.65 0.1 0.22 ± 0.1 1pin (Unit : mm) www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. Reel 20 / 21 6 Direction of feed ∗ Order quantity needs to be multiple of the minimum quantity. 2009.06 - Rev.A BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F, BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV Technical Note DIP14 <Tape and Reel information> 19.4±0.3 14 6.5±0.3 8 3.2±0.2 4.25±0.3 0.51Min. 1 Container Tube Quantity 1000pcs Direction of feed Direction of products is fixed in a container tube 7 7.62 0.3±0.1 0°−15° 2.54 0.5±0.1 ∗ Order quantity needs to be multiple of the minimum quantity. (Unit : mm) www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 21 / 21 6 2009.06 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. R0039A